Citrix CCE-N Certification 1Y0-440 Exam Dumps

Getting a Citrix certification is important, as most career paths require you have certifications. 1Y0-440 Architecting a Citrix Networking Solution is for Citrix Certified Expert – Networking (CCE – N) certification, which validates the skills that experienced IT solution designers such as architects, engineers, and consultants need in order to assess and design comprehensive architecture of a Citrix networking environment and configure complex networking configurations. Preparing for 1Y0-440 exam with valid exam dumps now. DumpsBase ensures that you can pass Citrix 1Y0-440 exam smoothly.

Review 1Y0-440 Exam Questions Free Online

1. A Citrix Architect has deployed NetScaler Management and Analytics System (NMAS) to monitor a high availability pair of NetScaler VPX devices.

The architect needs to deploy automated configuration backup to meet the following requirements:

– The configuration backup file must be protected using a password.

– The configuration backup must be performed each day at 8:00 AM GMT.

– The configuration backup must also be performed if any changes are made in the ns.conf file.

– Once the transfer is successful, auto-delete the configuration file from the NMAS.

Which SNMP trap will trigger the configuration file backup?

 
 
 
 

2. A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a NetScaler_________deployed_________. (Choose the correct option to complete sentence.)

 
 
 
 
 

3. Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.

The requirements captured during the design discussion held for a NetScaler design project are as follows:

– Two (2) pairs of NetScaler MPX appliances deployed in the DMZ and internal network.

– High Availability will be accessible for each NetScaler MPX

– The external NetScaler MPX appliance will be deployed in multi-arm mode.

– The internal NetScaler MPX will be deployed in single-arm mode wherein it will be connected to Cisco ACI Fabric.

– All three (3) Workspacelab sites: Dc, NDR and DR, will have similar NetScaler configurations and design.

How many NetScaler MPX appliances should the architect deploy at each site to meet the design requirements above?

 
 
 
 

4. Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a NetScaler design project.

They captured the following requirements from this design discussion:

– A pair of NetScaler MPX appliances will be deployed in the DMZ network.

– High Availability will be accessible in the NetScaler MPX in the DMZ Network.

– Load balancing should be performed for the internal network services like Microsoft Exchange Client Access Services and Microsoft App-V.

– The load balancing should be performed for StoreFront.

– The NetScaler Gateway virtual server will be utilizing the StoreFront load-balancing virtual server.

– The NetScaler Gateway virtual server and StoreFront.

– The NetScaler Gateway virtual service and StoreFront and load-balancing services are publicly accessible.

– The traffic for internal and external services must be isolated.

Click the Exhibit button to review the logical network diagram.

Which two design decisions are incorrect based on these requirements? (Choose two.)

 
 
 
 

5. Scenario: A Citrix Architect needs to plan for a customer environment in which more than 10,000 users will need access. The networking infrastructure needs to be able to handle the expected usage.

Which business driver should be prioritized based on the customer’s requirement?

 
 
 
 
 
 

6. Scenario: A Citrix Architect needs to deploy SAML integration between NetScaler (Identity Provider) and ShareFile (Service Provider).

The design requirements for SAML setup are as follows:

– NetScaler must be deployed as the Identity Provider (IDP).

– ShareFile server must be deployed as the SAML Service Provider (SP).

– The users in domain workspacelab.com must be able to perform Single Sign-on to ShareFile after authenticating at the NetScaler.

– The User ID must be UserPrincipalName.

– The User ID and Password must be evaluated by NetScaler against the Active Directory servers SFO­ADS-001 and SFO-ADS-002.

– After successful authentication, NetScaler creates a SAML Assertion and passes it back to ShareFile.

– Single Sign-on must be performed.

– SHA 1 algorithm must be utilized.

The verification environment details are as follows:

– Domain Name: workspacelab.com

– NetScaler AAA virtual server URL https://auth.workspacelab.com

– ShareFile URL https://sharefile.workspacelab.com

Which SAML IDP action will meet the design requirements?

 
 
 
 

7. What can help a Citrix Architect prepare to discuss time scales and resource requirements?

 
 
 
 
 

8. Scenario: A Citrix Architect holds a design discussion with a team of Workspacelab members, and they capture the following requirements for the NetScaler design project.

A pair of NetScaler MPX appliances will be deployed in the DMZ network and another pair in the internal network.

High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.

– Multi-factor authentication must be configured for the NetScaler Gateway virtual server.

– The NetScaler Gateway virtual server is integrated with the StoreFront server.

– Load balancing must be deployed for users from the workspacelab.com domain.

– The workspacelab users should be authenticated using Cert Policy and LDAP.

– All the client certificates must be SHA 256-signed, 2048 bits, and have UserPrincipalName as the subject.

– Single Sign-on must be performed between StoreFront and NetScaler Gateway.

After deployment, the architect observes that LDAP authentication is failing.

Click the Exhibit button to review the output of aaad debug and the configuration of the authentication policy.

Exhibit 1

Exhibit 2

What is causing this issue?

 
 
 
 

9. Which markup language can a Citrix use along with NITRO API to create a StyleBook?

 
 
 
 

10. Scenario: The Workspacelab team has configured their NetScaler Management and Analytics (NMAS) environment. A Citrix Architect needs to log on to the NMAS to check the settings.

Which two authentication methods are supported to meet this requirement? (Choose two.)

 
 
 
 
 
 

11. Scenario: A Citrix Architect has configured NetScaler Gateway integration with a XenApp environment to provide access to users from two domains: vendorlab.com and workslab.com. The Authentication method used is LDAP.

Which two steps are required to achieve Single Sign-on StoreFront using a single store? (Choose two.)

 
 
 
 

12. 0.53.13 nc.

The Citrix consulting team has assigned the task to implement these NetScaler devices in the infrastructure and set them up to be monitored and managed by NMAS.

The following are the requirements that were discussed during the project initiation call:

NMAS should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.

Configuration on the new MPX devices should be identical to MPX 11500 devices.

Configuration changes after the deployment and initial setup should be optimized using NMAS.

NMAS should be utilized to configure templates that can be utilized by the Workspacelab team in future deployment.

As per the requirement from the Workspacelab team, NMAS should be store the audited data for only 15 days.

Which process should the architect utilize to ensure that the deployment of MPX 11500 devices are optimized and that it is correct, before deploying the devices in production?

 
 
 
 

13. Scenario: A Citrix Architect needs to assess a NetScaler Gateway deployment that was recently completed by a customer and is currently in pre-production testing. The NetScaler Gateway needs to use ICA proxy to provide access to a XenApp and XenDesktop environment. During the assessment, the customer informs the architect that users are NOT able to launch published resources using the Gateway virtual server.

Click the Exhibit button to view the troubleshooting details collected by the customer.

What is the cause of this issue?

 
 
 
 

14. Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in an on-premises datacenter and Microsoft Azure.

Organizational details and requirements are as follows:

– Active XenApp and XenDesktop Service subscription

– No existing NetScaler deployment

– Global Server Load Balancing is used to direct connection requests to Location B, if the StoreFront server in Location B fails, connections should be directed to Location A.

Click the Exhibit button to view the conceptual environment architecture.

The architect should use _____ in Location A, and should use ________ in Location B. (Choose the correct option to complete the sentence.)

 
 
 
 
 

15. Scenario: A Citrix Architect needs to assess an existing NetScaler Gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.

Click the Exhibit button to view the information collected by the architect.

Which configurations should the architect change to meet all the stated requirements?

 
 
 
 
 

16. Scenario: A Citrix Architect needs to design a hybrid XenApp and XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in on-premises datacenter and Microsoft Azure.

Organizational details and requirements are as follows:

– Active XenApp and XenDesktop Service subscription

– No existing NetScaler deployment

– About 3,000 remote users are expected to regularly access the environment

– Multi-factor authentication should be used for all external connections

– Solution must provide load balancing for backend application servers

– Load-balancing services must be in Location B

Click the Exhibit button to view the conceptual environment architecture.

The architect should use ________ in Location A, and should use _________ in Location B. (Choose the correct option to complete the sentence.)

 
 
 
 
 
 

17. Scenario: A Citrix Architect needs to design a NetScaler deployment in Microsoft Azure. An Active-Passive NetScaler VPX pair will provide load balancing for three distinct web applications.

The architect has identified the following requirements:

– Minimize deployment costs where possible.

– Provide dedicated bandwidth for each web application.

– Provide a different public IP address for each web application.

For this deployment, the architect should configure each NetScaler VPX machine to have ______ network interface(s) and configure IP address by using ________. (Choose the correct option to complete the sentence).

 
 
 
 
 
 

18. Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.

They captured the following requirements during the design discussion held for a NetScaler design project:

– All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configurations and design.

– Both external and internal NetScaler MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode.

– GSLB should resolve both A and AAA DNS queries.

– In the GSLB deployment, the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site.

– When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.

– On the internal NetScaler, both the front-end VIP and backend SNIP will be part of the same subnet.

– The external NetScaler will act as default gateway for the backend servers.

– All three (3) sites, DC, NDR, and DR, will have two (2) links to the Internet from different service providers configured in Active/Standby mode.

Which design decision must the architect make the design requirements above?

 
 
 
 

19. 13 nc. These are placed behind a Cisco ASA 5505 Firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall.

The following requirements were captured by the architect during the discussion held as part of the NetScaler security implementation project with the customer’s security team:

The NetScaler device:

– Should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The NetScaler device should be able to stop the HTTP, TCP, and DNS based requests.

– Needs to protect backend servers from overloading.

– Needs to queue all the incoming requests on the virtual server level instead of the service level.

– Should provide access to resources on the basis of priority.

– Should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets, compromised webservers, known spammers/hackers, and phishing proxies.

– Should provide flexibility to enforce the desired level of security check inspections for the requests originating from a specific geolocation database.

– Should block the traffic based on a pre-determined header length, URL length, and cookie length. The device should ensure that characters such as a single straight quote (*); backslash(), and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.

Which two security features should the architect configure to meet these requirements? (Choose two.)

 
 
 
 
 

20. A Citrix Architect needs to make sure that maximum concurrent AAA user sessions are limited to 4000 as a security restriction.

Which authentication setting can the architect utilize to view the current configuration?

 
 
 
 

21. Which encoding type can a Citrix Architect use to encode the StyleBook content, when importing the StyleBook configuration under source attribute?

 
 
 
 

22. Scenario: A Citrix Architect needs to assess an existing on-premises NetScaler deployment which includes Advanced Endpoint Analysis scans. During a previous security audit, the team discovered that certain endpoint devices were able to perform unauthorized actions despite NOT meeting pre-established criteria.

The issue was isolated to several endpoint analysis (EPA) scan settings.

Click the Exhibit button to view the endpoint security requirements and configured EPA policy settings.

Which setting is preventing the security requirements of the organization from being met?

 
 
 
 
 
 
 

23. Scenario: A Citrix Architect needs to assess an existing on-premises NetScaler deployment which includes Advanced Endpoint Analysis scans. During a previous security audit, the team discovered that certain endpoint devices were able to perform unauthorized actions despite NOT meeting pre-established criteria.

The issue was isolated to several endpoint analysis (EPA) scan settings.

Click the Exhibit button to view the endpoint security requirements and configured EPA policy settings.

Which setting is preventing the security requirements of the organization from being met?

 
 
 
 

24. _________ content type supports sending NITRO commands to NetScaler. (Choose the correct option to complete sentence.)

 
 
 
 

25. Scenario: A Citrix Architect has met with a team of Workspacelab members for a design discussion.

They have captured the following requirements for NetScaler design project:

– The authentication must be deployed for the users from the workspacelab.com and vendorlab.com domains.

– The workspacelab users connecting from the internal (workspacelab) network should be authenticated using LDAP.

– The workspacelab users connecting from the external network should be authenticated using LDAP and RADIUS.

– The vendorlab users should be authenticated using Active Directory Federation Service.

– The user credentials must NOT be shared between workspacelab and vendorlab.

– Single Sign-on must be performed between StoreFront and NetScaler Gateway.

– A domain drop down list must be provided if the used connects to the NetScaler gateway virtual server externally.

Which method must the architect utilize for user management between the two domains?

 
 
 
 

Free 1Y0-204 Citrix Virtual Apps and Desktops 7 Administration Dumps
Updated Citrix CCP-V 1Y0-311 Practice Test

Add a Comment

Your email address will not be published. Required fields are marked *