MB-500 Dumps (V20.03) Are Your Path to Quick and Effective Preparation: Continue to Read MB-500 Free Dumps (Part 2, Q41-Q80) Online

1. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an enumeration named truckStatus that has the following statuses:

✑ Empty

✑ Loaded

✑ Completed

You have the following code:

You need to extend this enumeration and add the following statuses to the enumeration:

Quarantine, InTransit. You must then modify code that validates the switch statement.

Solution: Add a post handler to the method that checks the enumeration and logic for your new enumeration values using the enumeration value.

Does the solution meet the goal?

2. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You create a new form in a project.

You need to display tabs in a vertical alignment.

Solution: Apply the Simple List pattern.

Does the solution meet the goal?

3. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review/ screen.

You create a new form in a project.

You need to display tabs in a vertical alignment.

Solution: Apply the Operational Workspaces pattern.

Does the solution meet the goal?

4. Note: This question is part of a scries of questions that present the same scenario. Each question in the series contains a Unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You create a new form in a project.

You need to display tabs in a vertical alignment.

Solution: Apply the Details Master pattern.

Does the solution meet the goal?

5. You are a Dynamics 365 Finance developer. You create a class.

You need to mark the class to ensure that when code is compiled, the process fails if a specific method is called in the source code.

Which attribute should you use?

6. HOTSPOT

You are a Dynamics 365 Finance and Operations developer.

You have the following code: (Line numbers are included for reference only.)

You need to evaluate the code.

What is the correct output for the method? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

7. DRAG DROP

You are a Dynamics 365 Finance developer for a company that sells pre-owned vehicles. When the company acquires a new vehicle, vehicle identification (VIN) numbers are added to the VIN field in the CustTable.

You need to create an event handler to validate that new VIN values are at least 10 characters long.

Validation must occur when records are saved.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

8. HOTSPOT

You are a Dynamics 365 Finance and Operations developer.

You have the following code: (Line numbers are created for reference only.)

Which values does the info() method return? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

9. HOTSPOT

You have a Dynamics 365 Finance and Operations environment.

You have the following code: (Line numbers are included for reference only.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

10. You are a Dynamics 365 Finance developer.

You have a table named FMVehicle that contains a field named Vehicleld. The table has a clustered index named Vehicleldldx on the Vehicleld field. You declare a table buffer named vehicle to refer to the table.

You need to select all records from the FMVehicle table in ascending order based on Vehicleld field in the vehicle variable.

Which embedded-SQL statement should you use?

11. HOTSPOT

You have the following code:

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

12. You are a Dynamics 365 Supply Chain Management developer.

You are working on a project by using Visual Studio.

Several users check out a custom form version control and modify the form.

You need to find the user that has added a specific line of code to the form.

What should you do?

13. A company has an extension that makes changes to a base form.

You need to identify all extension changes made to the base form.

What are two possible ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

14. You are a Dynamics 365 Finance developer. You have a virtual machine that includes Visual Studio. You need to display the elements by model.

What should you do?

15. You are a Dynamics 365 Finance developer. You are testing a workflow in a user acceptance testing environment. You need to ensure that a specific user can accept purchase requisitions only if the requisition is in a specific status.

Which two options can you configure to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

16. You are using the SysTest framework to test code in Visual Studio.

You need to create a unit test class.

Which three attributes can you use to create the class? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

17. DRAG DROP

A company has a Dynamics 365 Finance and Operations environment.

You need to implement indices for new tables.

Which types of indexes should you use? To answer, drag the appropriate types of indexes to the correct requirements. Each type of index may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

18. You are a Dynamics 365 Finance developer. You have a solution that records product weights. You must store up to four decimals of precision by using a standard Extended Data Type (EDT). You need to add the field in a new table.

Which EDT should you extend?

19. You are working with extended data types in Visual Studio.

You need to create an extension of an Extended Data Types (EDT) that is derived from base data types.

Which three properties can be modified? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

20. You are a Dynamics 365 Finance developer. You need to create an extension class.

Which action should you perform?

21. You have a table in which multiple properties must be changed. Multiple table properties are locked down at the base table and must not be overwritten.

You need to modify the table properties by extending the table.

Which table property can you populate in a table extension by using the property sheet?

22. HOTSPOT

You have the following class definition:

You need to create an extension class and create a new static method in it that converts miles to kilometers and then call the method from another class.

How should you complete the code and call the method? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

23. You are creating a new form in Visual Studio.

You need to apply the Simple List pattern and apply the pattern to a form.

What are the two possible ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

24. DRAG DROP

A company plans to deploy Dynamics 365 Unified Operations.

You need to recommend deployment options for the company.

What should you recommend? To answer, drag the appropriate deployment options to the correct application requirement. Each deployment option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

25. You are a Dynamics 365 Finance developer.

You have a form that displays customer records by using a listpage control. You must add related sales total information for the selected customer to the form.

You need to display the required related sales total information.

What should you add to the form?

26. You are developing a customization for Dynamics 365 Finance.

The customization must extend objects from the Application Foundation package.

You need to create and configure a new model for the customization.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

27. You need to prepare to deploy a software deployable package to a test environment.

What are two possible ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

28. DRAG DROP

You are configuring your developer environment by using Team Explorer.

There are several developers working on a customization.

You need to ensure that all code is checked in and then merged to the appropriate branches.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

29. HOTSPOT

You have a Dynamics 365 Finance and Operations development environment.

You must add default filters to the fleet management form. You must view only sales that occur in the current sales period and where the Customer name field contains the next Wholesales.

You need to configure filtering.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

30. HOTSPOT

You are a Dynamics 365 Finance and Operations developer.

Users are experiencing slower load times for the All Customers form.

You need to update caching for CustTable to improve data retrieval times.

How should you configure CacheLookup properties? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

31. Contoso. Ltd. uses Dynamics 365 Finance. You receive reports of performance issues with the app. You need to use Performance Timer to investigate the issues.

Which URL should you use?

32. HOTSPOT

You are a Dynamics 365 Finance and Operations developer.

You need to monitor system performance.

Which tools should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

33. DRAG DROP

A company uses Dynamics 365 Unified Operations.

You need to implement role-based security for a set of fields in a table.

How should you arrange the security elements? To answer, drag the appropriate security elements to the correct locations. Each element may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

34. DRAG DROP

You are a Dynamics 365 Finance and Operations developer.

You need to use the Extensible Data Security (SDS) framework to restrict to the data in the Sales table form based on the customer group and the role of the user.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

35. You are Dynamics 36S Finance developer.

You need to explain the performance advantages of the different concurrency models.

What are three performance advantages of optimistic concurrency control over pessimistic concurrency control? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

36. DRAG DROP

You are a Dynamics 365 Finance and Operations developer.

You have a report in an existing model that connects with the following objects:

✑ in-memory table

✑ data provider class

✑ controller class

✑ contract class

The report is locked for modifications.

You need to create an extension of the in-memory table in a model and you add the new field to the extension.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

37. You are a Dynamics 365 Finance developer.

You need to deploy a new report in a developer environment.

From which two locations can you deploy the report? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

38. HOTSPOT

You are creating a Dynamics 365 Finance and Operations report. You cannot query the data for the report directly.

You must include parameters to specify data for the report.

You need to create the report.

What should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

39. DRAG DROP

You are a Dynamics 365 Finance and Operations developer.

The sales department manager must to be able to view total customers by region and total sales by regions.

You need to build key performance indicators (KPIs) and display them on a tile in the application.

How should you model the KPI? To answer, drag the appropriate objects to the correct KPI components. Each object may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

40. You are Dynamics 365 Finance developer.

You need to initialize an embedded Microsoft Power Bl report.

Which code segment should you add to the form initialization method?