Updated MB-320 Dumps V9.02 For Microsoft Dynamics 365 Supply Chain Management, Manufacturing Exam

You can get the most updated dumps questions to prepare for MB-320 Microsoft Dynamics 365 Supply Chain Management, Manufacturing exam. Microsoft MB-320 dumps V9.02 were updated based on the exam objectives, which contain 141 practice exam questions and answers. Candidates for Microsoft MB-320 exam typically specialize in one or more feature sets of Microsoft Dynamics 365 Finance, including finance, manufacturing, and supply chain management. Updated MB-320 dumps V9.02 help you a lot in the required skills.

You can read Microsoft MB-320 free dumps first.

1. Question Set 1

DRAG DROP

You are the production supervisor at a manufacturing company. You are in the process of configuring the production control module and its parameters.

A company plans to use manufacturing execution. Bill of materials (BOM) item consumption must be generated when items are reported at the operation level.

You need to configure the Manufacturing execution production order defaults form to allow for back flushing on operations.

How should you set up Automatic BOM consumption? To answer, drag the appropriate setting to the correct targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

2. DRAG DROP

A skateboard manufacturer uses route operations to schedule resources and estimate units per hour. All products use the same sub assembly item and resource sanding process.

You observe an increase in the number of units a sanding belt resource can produce. The production schedule is now inaccurate due to the number of units the sanding belt line can produce.

You must make a permanent change to the number of units the resource can produce for all future orders.

You need to adjust the process quantity on the route operation.

Which three actions should you perform in sequence? To answer, move the appropriate actions form the list of actions to the answer area and arrange them in the correct order.

3. HOTSPOT

A company implements Dynamics 365 Supply Chain Management. You must use functionality in the system for group production runs to prevent downtime and excessive cleaning of the machines on the production line. You need to set up the system.

Which behaviors should you expect? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

4. DRAG DROP

A pharmaceutical manufacturer uses Process manufacturing.

You are consolidating planned batch orders for a specific medication. The order must cover two weeks of demand. No other items need to be consolidated. You need to change the coverage group of the items.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

5. You are the production supervisor at a chemical processing plant. You must track attributes for each batch of chemicals. Automated quality orders must be generated when a batch order for these chemicals is reported as finished.

You need to ensure that the values of attributes are updated and tracked.

What three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

6. HOTSPOT

You are developing a new car audio system kit. The kit configuration has restrictions based on car model, speaker size, and other expression constraints. You need to set up a new item for the car audio system.

How should you create the new product? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

7. A manufacturer produces HDMI cables. Typically, the item is manufactured.

The manufacturer will occasionally buy unbranded HDMI cables from a vendor in order to keep up with demand. The company must use the same item number whether they make or buy the item.

What should you do?

8. DRAG DROP

A company manufactures high-end speakers. Customers may choose different color finishes and front grills. You build a product configuration model to represent this speaker.

You add the following attributes for the finish and grill.

You need to create a constraint that defines the allowable finish and grill combinations.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions and arrange them in the correct order.

9. DRAG DROP

A configure-to-order company is implementing Dynamics 365 Supply Chain Management. The company is preparing to use the product configuration model functionality to develop the Bill of materials (BOM), routes and valid configuration combinations.

You need to set up the configuration models, constraints, and pricing.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

10. HOTSPOT

A company manufactures high-end speaker systems. You have different configurations available for customers to customize features including finishes and speaker materials. You have a product configuration model with bill of material lines and conditions for each component.

A customer can optionally add on protective covers, but only if a non-metal material is selected. If any other material is selected, the covers cannot be added.

You add the following attributes:

You need to create an expression-based constraint that will only allow Corner Protection if Metal is not selected.

How should you complete the expression? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

11. DRAG DROP

A manufacturer uses route operations and job scheduling. You use a unique calendar for a conveyor line. The company observes a decrease in the number of hours

a conveyor line resource is operational due to breakdowns. You must make a temporary change to the number of hours the resource is available.

You need to adjust the efficiency percentage for the conveyor line calendar.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

12. A company produces paints and assembles bicycle frames.

You must account for paint drying time before assembly operations can begin. You need to set up the operation to encompass queue times.

Which two options can you use? Each correct answer presents part of solution. NOTE: Each correct selection is worth one point.

13. DRAG DROP

A company manufactures automobile engines. You must create product configurations for values that are used in different types of engines. Each value is based on a master valve design. Different gaskets and fittings are used to allow valves to work with different engines.

You need to translate production plans into Dynamics 365 Finance and Operations elements.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

14. You maintain responsible resource calendars and production orders for a manufacturing company. All production resources use the same production calendar. A machine in the facility is defective and must be closed for repairs for the next two days. You need to configure the resource calendar to close the resource for production for the next two days.

What should you do?

15. A manufacturing company is implementing Dynamics 365 Supply Chain Management. The company uses a standard costing model to value inventory.

During the setup of the system, all areas that impact the standard cost of the item must be configured correctly to calculate a complete standard cost by using routing, Bill of materials (BOM) and overhead

burden.

You need to verify that all areas of the system are correctly configured.

Which object does NOT impact the standard cost of manufactured items?

16. DRAG DROP

A glass bottle manufacturer uses route operations to schedule resources and track manufacturing costs. The company has recently seen an increase in demand and purchases another resource. The company

uses the same costs per resource.

However, the new resource costs more to run. The company must be able to track cost contributions for the new resource.

You need to create a cost category for the new resource.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. NOTE: Each correct selection is worth one point.

17. DRAG DROP

You are the product design manager for a computer manufacturer. Your new laptop model is configurable. There are restrictions on which hardware components can be selected depending on the model. You create configuration groups for hardware and software. You need to create a new laptop item number and configurations. In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

18. A company is looking to use Dynamics 365 Supply Chain Management.

The company is in the process of redesigning and retooling an existing manufacturing plant to group similar, cellular operations to improve efficiency and minimize wasted time between operations. They want to locate raw materials close to where they are needed without losing reorder visibility.

You need to set up their environment.

Which kind of production type should you implement?

19. A company is looking to use Dynamics 365 Supply Chain Management.

The company is in the process of redesigning and retooling an existing manufacturing plant to support a large long-running contract. They want to be able to forecast capacity to easily ramp up for additional products.

You need to set up the environment.

Which type of manufacturing should you implement?

20. DRAG DROP

A company plans to implement Dynamics 365 Supply Chain Management. You need to determine which manufacturing solutions to use.

Which manufacturing solution should you use? To answer, drag the appropriate setting to the correct drop targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

21. A company produces generic and name-brand paper plates in the same factory using standard costing and using the same Bill of materials and routes to produce both products. The finance and production teams want a way to view individual raw material consumption costs in the ledger.

You need to add a production group to control postings to the ledger.

What should you do?

22. HOTSPOT

A company implements Dynamics 365 Supply Chain Management.

Production orders are generated for products directly from projects.

You create the following production order:

Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

23. HOTSPOT

A customer produces light projection toys for holiday decorations throughout the year.

You must implement Bills of material (BOMs) for the product lifestyle.

The solution must meet the following requirements:

You need to create a BOM for each phase.

Which BOM types should you use? To answer, select the appropriate configuration options in the answer area. NOTE: Each correct selection is worth one point.

24. A manufacturing company uses advanced warehouse management functionality for a new warehouse.

After releasing a production order, you observe that the warehouse work for raw material picking was not generated.

You need to go through the warehouse management setup to determine what is missing.

What three setup configurations must you validate? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

25. DRAG DROP

A company uses Dynamics 365 Supply Chain Management for Process manufacturing.

Employees spend considerable time cleaning and setting up machines in a specific area between production orders. You must group production activities to optimize cleaning and set up time.

You need to set up the system.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. NOTE: Each correct selection is worth one point.

26. DRAG DROP

A company makes lubricants and greases used in the automotive industry. The company plans to implement Dynamics 365 Supply Chain Management.

The system must meet the following requirements:

- Schedule the batch production of products.

- Plan for inventory fluctuations of ingredients that are used across different products.

- Schedule delivery of amounts of proprietary compounds used during production from vendors to keep production runs on schedule and eliminating excess stock on hand or delayed production.

The company is starting the initial setup of their Dynamics 365 environment.

You need to perform the initial setup of the environment.

Where would you need to set up the following items? To answer, drag the appropriate setting to the correct drop targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

27. A company makes lubricants and greases used in the automotive industry.

They are planning to use Dynamics 365 Supply Chain Management to make products whose characteristics can be tracked throughout the production process and are associated with the packaged product. You need to identify which production methodology to use.

Which production methodology should you use?

28. DRAG DROP

A company plans to account for indirect costs related to materials used to manufacture products.

The items used to manufacture products have surcharge rates that depend on the type of product being used. You need to set up the costing sheet to include surcharges for specific items.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

29. A company produces multiple products that require an installation kit that includes 50 components.

The company does not want to include these 50 components in every Bill of materials (BOM). You have a BOM kit that includes all 50 components, but you do not want it to produce a separate production order. You need to set up the product BOM for the finished good.

What should you do?

30. DRAG DROP

A company overstates on-hand raw materials due to the time it takes to post raw materials when production orders are processed.

All items used to manufacture finished goods must be consumed when a finished good is reported as finished. You must not change all bill of materials lines to use the option of flushing principal.

You need to ensure that all production orders consume raw materials at Report as finished.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

31. HOTSPOT

A company makes engine parts used in the automotive industry.

They are in the process of retooling an existing manufacturing plant. They are looking to use Dynamics 365 Supply Chain Management to help support the Bill of Materials (BOM) product lifecycle for engineering version control.

You must translate existing production processes into the proper elements. You need to create BOM lifecycle states to translate existing production processes into the proper elements.

What type of BOM product lifecycle state should you create? To answer, select the appropriate BOM state in the answer area.

32. HOTSPOT

A company implements Dynamics 365 Finance and Operations.

You need to ensure that cost roll-ups and sales price calculations are configured for the scenario.

Which options should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

33. DRAG DROP

You are the product definition manager for a car manufacturing company. You set up and maintain the production configuration models used at the company.

You must build a new configuration model and include constraints in the model.

You need to determine which constraint type to use for each scenario.

Which constraint type should you use? To answer, drag the appropriate constraint types to the correct scenarios. Each constraint type may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content. NOTE: Each correct selection is worth one point.

34. You are the production supervisor in charge of setting effective cost prices for the labor force in a manufacturing company.

It is the end of the year and the labor rates have been recalculated based on new salary data. You need to update the effective labor costs for all labor groups.

Which element must be updated?

35. DRAG DROP

A company produces custom-made bicycles that offer many different configurations.

Your standard bicycle, B-0001, is made with many common components such as a frame and wheels. Customers can choose between two frames: F-0001 or F-0009. Wheel W-0001 is only compatible with frame F-0001.

You create the following configuration groups: Frames, Wheels.

You need to ensure that users can only select valid combinations of frames and wheels.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

36. A company produces pipe at certain fixed lengths.

The company must be able to schedule cutting machines. You set up the cutting machines as resources. All cutting resources can produce many of the products. There are some products that require cutting machines that can produce longer lengths of product. Only some of the machines can do this.

You need to configure the resources to account for these different products.

What should you do?

37. DRAG DROP

A company uses separate finished good item numbers for size variations of the same product. The company wants to minimize the number of variously-sized items that are created. You need to perform the setup to allow variants in size to the product master.

Which five actions should you perform in sequence? To answer, move the appropriate actions from the list

of actions to the answer area and arrange them in the correct order.

38. A company manufactures and sells speaker boxes. The speaker boxes can be silver or black with a basic or upgraded wiring harness assembly. The speaker box must be created in the item master so the variables for colors and harness type can be assigned at order entry.

You need to create a new item that supports multiple variables.

What should you do?

39. HOTSPOT

An inventory control clerk manages adjustments in inventory. Some adjustments have a cost impact. Other adjustments must be posted to a specific ledger account or must be registered in inventory. You need to configure the system.

Which journal types should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

40. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company uses Dynamics 365 Supply Chain Management to manage production configuration. A product designer creates a remote control toy that can be purchased with different tire sizes. Sales representatives need to perform product configuration for the custom tire variants when they create a new order.

Solution: Select the custom tire size when filling out the item requirement line.

Does the solution meet the goal?


 

New Microsoft Azure Architect Technologies Exam AZ-303 Dumps
Updated AZ-204 Dumps To Pass Developing Solutions for Microsoft Azure Exam

Add a Comment

Your email address will not be published. Required fields are marked *