Exam MD-100 Windows 10 Updated Dumps V15.02 Released Online

1. Your company has an isolated network used for testing. The network contains 20 computers that run Windows 10. The computers are in a workgroup. During testing, the computers must remain in the workgroup.

You discover that none of the computers are activated.

You need to recommend a solution to activate the computers without connecting the network to the Internet.

What should you include in the recommendation?

2. You plan to deploy Windows 10 to 100 secure computers.

You need to select a version of Windows 10 that meets the following requirements:

✑ Uses Microsoft Edge as the default browser

✑ Minimizes the attack surface on the computer

✑ Supports joining Microsoft Azure Active Directory (Azure AD)

✑ Only allows the installation of applications from the Microsoft Store

What is the best version to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.

3. DRAG DROP -

You have a computer named Computer1 that runs Windows 8.1. Computer1 has a local user named User1 who has a customized profile.

On Computer1, you perform a clean installation of Windows 10 without formatting the drives.

You need to migrate the settings of User1 from Windows 8.1 to Windows 10.

Which two actions should you perform? To answer, drag the appropriate actions to the correct targets. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

4. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a computer named Computer1 that runs Windows10.

A service named Application1 is configured as shown in the exhibit.

You discover that a user used the Service1 account to sign in to Computer1 and deleted some files.

You need to ensure that the identity used by Application1 cannot be used by a user to sign in to sign in to the desktop on Computer1. The solution must use the principle of least privilege.

Solution: On Computer1, you configure Application1 to sign in as the Local System account and select the Allow service to interact with desktop check box. You delete the Service1 account.

Does this meet the goal?

5. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a computer named Computer1 that runs Windows 10.

A service named Application1 is configured as shown in the exhibit.

You discover that a user used the Service1 account to sign in to Computer1 and deleted some files.

You need to ensure that the identity used by Application1 cannot be used by a user to sign in to sign in to the desktop on Computer1. The solution must use the principle of least privilege.

Solution: On Computer1, you assign Service1 the Deny log on locally user right.

Does this meet the goal?

6. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a computer named Computer1 that runs Windows 10.

A service named Application1 is configured as shown in the exhibit.

You discover that a user used the Service1 account to sign in to Computer1 and deleted some files.

You need to ensure that the identity used by Application1 cannot be used by a user to sign in to sign in to the desktop on Computer1. The solution must use the principle of least privilege.

Solution: On Computer1, you assign Service1 the Deny log on as a service user right.

Does this meet the goal?

7. You have a Microsoft Azure Active Directory (Azure AD) tenant.

Some users sign in to their computer by using Windows Hello for Business.

A user named User1 purchases a new computer and joins the computer to Azure AD.

User1 is not able to use Windows Hello for Business on his computer.

User1 sign-in options are shown on the exhibit.

You open Device Manager and confirm that all the hardware works correctly.

You need to ensure that User1 can use Windows Hello for Business facial recognition to sign in to the computer.

What should you do first?

8. Your company uses Microsoft Deployment Toolkit (MDT) to deploy Windows 10 to new computers.

The company purchases 1,000 new computers.

You need to ensure that the Hyper-V feature is enabled on the computers during the deployment.

What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

9. Your network contains an Active Directory domain that is synced to a Microsoft Azure Active Directory (Azure AD) tenant.

Your company purchases a Microsoft 365 subscription.

You need to migrate the Documents folder of users to Microsoft OneDrive for Business.

What should you configure?

10. Your network contains an Active Directory domain. The domain contains a user named User1.

User1 creates a Microsoft account.

User1 needs to sign in to cloud resources by using the Microsoft account without being prompted for credentials.

Which settings should User1 configure?

11. HOTSPOT -

Your network contains an Active Directory domain named adatum.com that uses Key Management Service (KMS) for activation.

You deploy a computer that runs Windows 10 to the domain.

The computer fails to activate.

You suspect that the activation server has an issue.

You need to identify which server hosts KMS.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

12. HOTSPOT -

You deploy Windows 10 to a new computer named Computer1.

You sign in to Computer1 and create a user named User1.

You create a file named LayoutModification.xml in the C:UsersDefaultAppDataLocalMicrosoftWindowsShellfolder. LayoutModification.xml contains the following markup.

What is the effect of the configuration? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

13. You have an Azure Active Directory (Azure AD) tenant named contoso.com.

You have a workgroup computer named Computer1 that runs Windows 10.

You need to add Computer1 to contoso.com.

What should you use?

14. You have a computer that runs Windows 10.

You need to configure a picture password.

What should you do?

15. You have a workgroup computer named Computer1 that runs Windows 10.

You need to configure Windows Hello for sign-in to Computer1 by using a physical security key.

What should you use?

16. Your network contains an Active Directory domain. The domain contains a computer named Computer1 that runs Windows 10.

The domain contains the users shown in the following table.

Computer1 has the local users shown in the following table.

All users have Microsoft accounts.

Which two users can be configured to sign in by using their Microsoft account? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

17. HOTSPOT -

You have the source files shown in the following table.

You mount an image from Image1.wim to a folder named C:Mount.

You need to add the French language pack to the mounted image.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

18. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory domain. The domain contains a computer named Computer1 that runs Windows 8.1.

Computer1 has apps that are compatible with Windows 10.

You need to perform a Windows 10 in-place upgrade on Computer1.

Solution: You copy the Windows 10 installation media to a network share. From Windows 8.1 on Computer1, you run setup.exe from the network share.

Does this meet the goal?

19. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory domain. The domain contains a computer named Computer1 that runs Windows 8.1.

Computer1 has apps that are compatible with Windows 10.

You need to perform a Windows 10 in-place upgrade on Computer1.

Solution: You copy the Windows 10 installation media to a Microsoft Deployment Toolkit (MDT) deployment share. You create a task sequence, and then you run the MDT deployment wizard on Computer1.

Does this meet the goal?

20. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory domain. The domain contains a computer named Computer1 that runs Windows 8.1.

Computer1 has apps that are compatible with Windows 10.

You need to perform a Windows 10 in-place upgrade on Computer1.

Solution: You add Windows 10 startup and install images to a Windows Deployment Services (WDS) server. You start Computer1 by using WDS and PXE, and then you initiate the Windows 10 installation.

Does this meet the goal?

21. Your company deploys Windows 10 Enterprise to all computers. All the computers are joined to Microsoft Azure Active Directory (Azure AD).

The company purchases a new computer for a new user and creates an Azure AD account for the user.

The user signs in to the computer by using the Azure AD account. The user discovers the activation error shown in the following exhibit.

You need to activate Windows 10 Enterprise on the computer.

What should you do?

22. You have a computer named Computer1 that runs Windows 10.

Several users have signed in to Computer1 and have a profile.

You create a taskbar modification file named LayoutModification.xml.

You need to ensure that LayoutModification.xml will apply to all users who sign in to Computer1.

To which folder should you copy LayoutModification.xml?

23. HOTSPOT -

Your company uses a Key Management Service (KMS) to activate computers that run Windows 10.

A user works remotely and establishes a VPN connection once a month.

The computer of the user fails to be activated.

Which command should you run on the computer to initiate activation? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

24. HOTSPOT -

You have a server named Server1 and computers that run Windows 8.1. Server1 has the Microsoft Deployment Toolkit (MDT) installed.

You plan to upgrade the Windows 8.1 computers to Windows 10 by using the MDT deployment wizard.

You need to create a deployment share on Server1.

What should you do on Server1, and what are the minimum components you should add to the MDT deployment share? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

25. Topic 2 - Question Set 2

HOTSPOT

Your network contains an Active Directory forest. The forest contains a root domain named contoso.com and a child domain named corp.contoso.com.

You have a computer named Computer1 that runs Windows 10. Computer1 is joined to the corp.contoso.com domain.

Computer1 contains a folder named Folder1. In the Security settings of Folder1, Everyone is assigned the Full control permissions.

On Computer1, you share Folder1 as Share1 and assign the Read permissions for Share1 to the Users group.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

26. HOTSPOT -

You have a computer named Computer1 that runs Windows 10. Computer1 is in a workgroup.

Computer1 contains the folders shown in the following table.

On Computer1, you create the users shown in the following table.

User1 encrypts a file named File1.txt that is in a folder named C:Folder1.

What is the effect of the configuration? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

27. HOTSPOT

You have a computer named Computer1 that runs Windows 10 and is joined to an Active Directory domain named adatum.com.

A user named Admin1 signs in to Computer1 and runs the whoami command as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

28. You have a computer named Computer1 that runs Windows 10.

You need to configure User Account Control (UAC) to prompt administrators for their credentials.

Which settings should you modify?

29. You have several computers that run Windows 10. The computers are in a workgroup.

You need to prevent users from using Microsoft Store apps on their computer.

What are two possible ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

30. You have a computer named Computer1 that runs Windows 10.

You need to prevent standard users from changing the wireless network settings on Computer1. The solution must allow administrators to modify the wireless network settings.

What should you use?

31. HOTSPOT -

You have three computers that run Windows 10 as shown in the following table.

All the computers have C and D volumes. The Require additional authentication at startup Group Policy settings is disabled on all the computers.

Which volumes can you encrypt by using BitLocker Drive Encryption (BitLocker)? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

32. Your network contains an Active Directory domain named contoso.com. The domain contains a computer named Computer1 that runs Windows 10.

On Computer1, you create an NTFS folder and assign Full control permissions to Everyone.

You share the folder as Share1 and assign the permissions shown in the following table.

When accessing Share1, which two actions can be performed by User1 but not by User2? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

33. HOTSPOT -

You have a computer that runs Windows 10. The computer contains a folder named C:ISOs that is shared as ISOs.

You run several commands on the computer as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

34. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A user named User1 has a computer named Computer1 that runs Windows 10. Computer1 is joined to an Azure Active Directory (Azure AD) tenant named contoso.com. User1 joins Computer1 to contoso.com by using [email protected].

Computer1 contains a folder named Folder1. Folder1 is in drive C and is shared as Share1.

Share1 has the permission shown in the following table.

A user named User2 has a computer named Computer2 that runs Windows 10. User2 joins Computer2 to contoso.com by using [email protected].

User2 attempts to access Share1 and receives the following error message: “The username or password is incorrect.”

You need to ensure that User2 can connect to Share1.

Solution: In Azure AD, you create a group named Group1 that contains User1 and User2.

You grant Group1 Modify access to Folder1.

Does this meet the goal?

35. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A user named User1 has a computer named Computer1 that runs Windows 10. Computer1 is joined to an Azure Active Directory (Azure AD) tenant named contoso.com. User1 joins Computer1 to contoso.com by using [email protected].

Computer1 contains a folder named Folder1. Folder1 is in drive C and is shared as Share1.

Share1 has the permission shown in the following table.

A user named User2 has a computer named Computer2 that runs Windows 10. User2 joins Computer2 to contoso.com by using [email protected].

User2 attempts to access Share1 and receives the following error message: “The username or password is incorrect.”

You need to ensure that User2 can connect to Share1.

Solution: You create a local user account on Computer1 and instruct User2 to use the local account to connect to Share1.

Does this meet the goal?

36. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A user named User1 has a computer named Computer1 that runs Windows 10. Computer1 is joined to an Azure Active Directory (Azure AD) tenant named contoso.com. User1 joins Computer1 to contoso.com by using [email protected].

Computer1 contains a folder named Folder1. Folder1 is in drive C and is shared as Share1.

Share1 has the permission shown in the following table.

A user named User2 has a computer named Computer2 that runs Windows 10. User2 joins Computer2 to contoso.com by using [email protected].

User2 attempts to access Share1 and receives the following error message: “The username or password is incorrect.”

Solution: In Azure AD, you create a group named Group1 that contains User1 and User2. You grant Group1 Modify access to Folder1.

Does this meet the goal?

37. You have a computer named Computer1 that runs Windows 10. Computer1 contains a folder named Folder1.

You need to log any users who take ownership of the files in Folder1.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

38. HOTSPOT -

Your network contains an Active Directory domain.

The domain contains the users shown in the following table.

The domain contains a computer named Computer1 that runs Windows 10.

Computer1 contains a folder named Folder1 that has the following permissions:

✑ User2: Deny Write

✑ Group1: Allow Read

✑ Group2: Allow Modify

Folder1 is shared as Share1$. Share1$ has the following configurations:

✑ Everyone: Allow Full control

✑ Access-based enumeration: Enabled

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

39. You are a network administrator at your company.

The company uses an application that checks for network connectivity to a server by sending a ping request to the IPv6 address of the server. If the server replies, the application loads.

A user cannot open the application.

You manually send the ping request from the computer of the user and the server does not reply. You send the ping request from your computer and the server replies.

You need to ensure that the ping request works from the user’s computer.

Which Windows Defender firewall rule is a possible cause of the issue?

40. HOTSPOT -

Use the drop-down menus to select the answer choice that completes each statement based on the information presented on the graphic.

NOTE: Each correct selection is worth one point.

41. HOTSPOT -

You have a computer named Computer5 that runs Windows 10 that is used to share documents in a workgroup.

You create three users named User-a, User-b, User-c by using Computer Management. The users plan to access Computer5 from the network only.

You have a folder named Data.

The Advanced Security Settings for the Data folder are shown in the Security exhibit. (Click the Security tab).

You share the Data folder.

The permissions for User-a are shown in the User-a exhibit (Click the User-a tab.)

The permissions for user-b are shown in the User-b exhibit. (Click the User-b tab.)

The permissions for user-c are shown in the User-c exhibit. (Click the User-c tab.)

For each of the following statements, select Yes if the statements is true. Otherwise, select No. NOTE: Reach correct selection is worth one point.

42. HOTSPOT -

You have a computer that runs Windows 10 and contains the folders shown in the following table.

You create the groups shown in the following table.

On FolderA, you disable permission inheritance and select the option to remove all inherited permissions.

To each folder, you assign the NTFS permissions shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

43. Your network contains an Active Directory domain. The domain contains a computer named Computer1 that runs Windows 10.

You need to view the settings to Computer1 by Group Policy objects (GPOs) in the domain and local Group Policies.

Which command should you run?

44. Your network contains an Active Directory domain. The domain contains computers that run Windows 10.

You need to provide a user with the ability to remotely create and modify shares on the computers. The solution must use the principle of least privilege.

To which group should you add the user?

45. You have a computer named Computer1 that runs Windows 10 Current branch. Computer1 belongs to a workgroup.

You run the following commands on Computer1.

New-LocalUser ג"Name User1 ג"NoPassword

Add-LocalGroupMember Users ג"Member User1

What is the effect of the configurations?

46. You have a computer that runs Windows 10 and is joined to Azure Active Directory (Azure AD).

You attempt to open Control Panel and receive the error message shown on the following exhibit.

You need to be able to access Control Panel.

What should you modify?

47. HOTSPOT -

Your domain contains a Computer named Computer1 that runs Windows 10. Computer1 does not have a TPM.

You need to be able to encrypt the C drive by using Bitlocker Drive Encryption (BitLocker). The solution must ensure that the recovery key is stored in Active Directory.

Which two Group Policy settings should you configure? To answer, select the appropriate settings in the answer area. NOTE: Each correct selection is worth one point.

48. You have a public computer named Computer1 that runs Windows 10/ Computer1 contains a folder named Folder1.

You need to provide a user named User1 with the ability to modify the permissions of Folder1. The solution must use the principle of least privilege.

Which NTFS permission should you assign to User1?

49. You have 10 computers that run Windows 10 and have BitLocker Drive Encryption (BitLocker) enabled.

You plan to update the firmware of the computers.

You need to ensure that you are not prompted for the BitLocker recovery key on the next restart. The drive must be protected by BitLocker on subsequent restarts.

Which cmdlet should you run?

50. HOTSPOT -

You have a computer named Computer1 that runs Windows 10.

You are troubleshooting Group Policy objects (GPOs) on Computer1.

You run gpresult /user user1 /v and receive the output shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

51. HOTSPOT -

You have a computer named Computer1 that runs Windows 10. Computer1 is in a workgroup.

Computer1 contains the local users shown in the following table.

You create a folder named Folder1 that has the permissions shown in the following table.

You create a file named File1.txt in Folder1 and allow Group2 Full control permissions to File1.txt.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

52. HOTSPOT -

You have a workgroup computer named Computer1 that runs Windows 10.

Computer1 has the users accounts shown in the following table:

Computer1 has the local Group Policy shown in the following table.

You create the Local ComputerAdministrators policy shown in the following table.

You create the Local ComputerNon-Administrators policy shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

53. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A user named User1 has a computer named Computer1 that runs Windows 10. Computer1 is joined to an Azure Active Directory (Azure AD) tenant named contoso.com. User1 joins Computer1 to contoso.com by using [email protected].

Computer1 contains a folder named Folder1. Folder1 is in drive C and is shared as Share1.

Share1 has the permission shown in the following table.

A user named User2 has a computer named Computer2 that runs Windows 10. User2 joins Computer2 to contoso.com by using [email protected].

User2 attempts to access Share1 and receives the following error message: “The username or password is incorrect.”

You need to ensure that User2 can connect to Share1.

Solution: You create a local user account on Computer1 and instruct User2 to use the local account to connect to Share1.

Does this meet the goal?

54. Your network contains an Active Directory domain. The domain contains 1,000 computers that run Windows 10.

You need to prevent the computers of the research department from appearing in Network in File Explorer.

What should you do?

55. HOTSPOT -

You have two computers named Computer1 and Computer2 that run Windows 10. The computers are in a workgroup.

You perform the following configurations on Computer1:

✑ Create a user named User1.

✑ Add User1 to the Remote Desktop Users group.

You perform the following configurations on Computer2:

✑ Create a user named User1 and specify the same user password as the one set on Computer1.

✑ Create a share named Share2 and grant User1 Full control access to Share2.

✑ Enable Remote Desktop.

What are the effects of the configurations? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

56. HOTSPOT -

Your network contains an Active Directory domain. The domain contains a group named Group1.

All the computers in the domain run Windows 10. Each computer contains a folder named C:Documents that has the default NTFS permissions set.

You add a folder named C:DocumentsTemplates to each computer.

You need to configure the NTFS permissions to meet the following requirements:

✑ All domain users must be able to open the files in the Templates folder.

✑ Only the members of Group1 must be allowed to edit the files in the Templates folder.

How should you configure the NTFS settings on the Templates folder? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

57. You deploy Windows 10 to 20 new laptops.

The laptops will be used by users who work at customer sites. Each user will be assigned one laptop and one Android device.

You need to recommend a solution to lock the laptop when the users leave their laptop for an extended period.

Which two actions should you include in the recommendation? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

58. You have a workgroup computer named Computer1 that runs Windows 10.

Computer1 has the user accounts shown in the following table.

User3, User4, and Administrator sign in and sign out on Computer1. User1 and User2 have never signed in to Computer1.

You are troubleshooting policy issues on Computer1. You sign in to Computer1 as Administrator.

You add the Resultant Set of Policy (RsoP) snap-in to an MMC console.

Which users will be able to sign in on Computer1?

59. HOTSPOT -

You have a computer named Computer1 that runs Windows 10. Computer1 is in a workgroup.

Computer1 contains the local users shown in the following table.

Computer1 contains the folders shown in the following table.

The Users group has Full control permissions to Folder1, Folder2, and Folder3.

User1 encrypts two files named File1.docx and File2.docx in Folder1 by using EFS.

Which users can move each file? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

60. Your network contains an Active Directory domain. The domain contains a computer named Computer1 that runs Windows 10. Computer1 contains a folder named Folder1.

You plan to share Folder1. Everyone will have Read share permissions, and administrators will have Full control share permission.

You need to prevent the share from appearing when users browse the network.

What should you do?