Dell Client Systems Deployment and Implementation Achievement D-CLS-DY-A-00 Exam Dumps (V8.02): Pass Your Exam Successfully

1. Scenario: (Continued from Question 2) After deploying the drive mapping script via Intune, users report that the F: drive is not appearing. The Intune Administrator checks the script execution status in the Intune console for an affected Dell laptop.

Device: Laptop-123

Script: MapFinanceDrive.ps1

Execution Status: Failed

Result Details:

--------------------------------------------------

Error Code: 0x87D10199

Error Description: Script execution timed out.

Output: (No output captured)

--------------------------------------------------

What are potential reasons for a PowerShell script deployed via Intune to time out during execution? (Select all that apply.)

2. Scenario: An End User receives a new Dell Latitude laptop that has been pre-imaged at the Dell factory using the company's SCCM stand-alone media process (Boot-in-Factory - BIF). The accompanying instructions state that upon first power-on at their home office, the user needs to connect the laptop to their home network (via Ethernet or WiFi) and the remaining setup steps (like domain join, final application installs) will complete automatically.

Question 1: The End User powers on the laptop. After the initial Windows Out-of-Box Experience (OOBE) screens (language, keyboard layout), they are presented with a custom message box generated by the SCCM Task Sequence stating: "Network Connection Required. Please connect an Ethernet cable or configure your WiFi connection now, then click OK to continue the corporate setup process."

Which component or script, specifically added for the Dell BIF process, is most likely responsible for displaying this custom prompt during the Post-Delivery phase?

3. Scenario: An End User is using Dell Migrate (via Dell SupportAssist on the new PC and Dell Data Assistant on the old PC) to transfer their files from an old Windows 10 laptop to a new Dell Latitude. The old laptop has BitLocker enabled on the C: drive. During the migration pre-check phase on the old laptop, Dell Data Assistant displays a message indicating that BitLocker must be disabled or suspended to proceed. The user is not familiar with BitLocker management.

Question 1: The End User calls the IT help desk.

What is the *least* disruptive action the help desk technician should guide the user to perform on the old laptop to allow Dell Migrate to proceed, while ensuring the drive remains encrypted according to company policy after the migration?

4. Scenario: (Continued from Question 3) After ensuring the important OneDrive files are downloaded locally on the old PC (by selecting "Always keep on this device"), the End User decides to use Dell Migrate again to transfer only the previously skipped files and potentially some recently modified documents, rather than moving everything.

Which option within Dell Migrate should the user select on the new PC to achieve this selective migration?

5. Scenario: An Asset Manager at a large corporation is responsible for the secure retirement of 500 Dell Latitude laptops that are coming off lease. Company policy mandates NIST 800-88 compliant data sanitization ("Purge" level) and environmentally responsible disposal. The manager must coordinate with the deployment team and a certified e-waste vendor. They are using Dell tools and processes where possible.

Question 1: Before handing over the laptops to the e-waste vendor, the Asset Manager needs to ensure data sanitization.

Which Dell tool or feature, configurable via scripting or Dell Command | Configure, can assist in automating the BIOS-level settings required to prepare a system for a secure data wipe using external tools, although it doesn't perform the wipe itself?

6. Scenario: (Continued from Question 3) To address the potential timeout issue related to network share accessibility, the Intune Administrator decides to add error handling and logging to the MapFinanceDrive.ps1 script before redeploying it.

# Script: MapFinanceDrive_v2.ps1

# Purpose: Maps the F: drive to the finance share with error handling.

$ErrorActionPreference = 'Stop'

$LogPath = "C:ProgramDataIntuneScriptsMapFinanceDrive.log"

function Write-Log ($Message) {

Add-Content -Path $LogPath -Value "$(Get-Date -Format 'yyyy-MM-dd HH:mm:ss') - $Message"

}

Write-Log "Script started."

$SharePath = "\Server1Finance"

# << INSERT CODE HERE >>

if (Test-Path -Path "F:") {

Write-Log "Drive F: mapped successfully to $SharePath."

} else {

Write-Log "Failed to map drive F: to $SharePath."

# Optionally exit with non-zero code for Intune failure reporting

# exit 1

}

Write-Log "Script finished."

Which PowerShell code block should be inserted at << INSERT CODE HERE >> to attempt the drive mapping and catch potential errors gracefully?

7. Scenario: A Security Analyst is working with the IT deployment team to enhance the asset information recorded during new Dell client system deployments. The goal is to ensure critical security-related configurations are captured in the central Asset Management System (AMS) from the moment a device is provisioned, facilitating compliance checks and incident response.

Question 1: The Security Analyst mandates that the status of the Trusted Platform Module (TPM) chip (Enabled/Disabled, Activated/Deactivated, Owned/Not Owned) must be recorded in the AMS during deployment.

Which method is most suitable for a Deployment Technician to programmatically retrieve this TPM status from a Dell laptop within a WinPE/SCCM Task Sequence environment for automated recording?

8. Scenario: An IT Administrator is managing a large-scale hardware refresh project involving several hundred Dell laptops ordered through Dell Configuration Services. The laptops are shipped directly to various branch offices. The administrator needs to ensure that the Field Technicians at each site correctly verify the received equipment against the centrally managed electronic work orders before proceeding with deployment. The work orders contain specific Service Tags and configuration details.

Question 1: To facilitate accurate verification by Field Technicians, which piece of information uniquely and reliably identifies a specific Dell laptop unit and MUST be cross-referenced between the physical device and the electronic work order?

9. Scenario: (Continued from Question 1) The Security Analyst also requires that the script used for recording asset information captures whether a BIOS Setup Password is currently set on the Dell device. The Deployment Technician uses PowerShell within the SCCM Task Sequence.

# Partial PowerShell script running in WinPE/Full OS during Task Sequence

$tsenv = New-Object -COMObject Microsoft.SMS.TSEvironment

# Retrieve Service Tag (already done)

$ServiceTag = $tsenv.Value("ServiceTagVar")

# Retrieve TPM Status (using WMI - code omitted)

$TPMEnabled = $true # Placeholder

$TPMActive = $true # Placeholder

# << INSERT CODE HERE TO CHECK IF SETUP PASSWORD IS SET >>

# Record data to AMS (code omitted)

Log-DataToAMS -ServiceTag $ServiceTag -TPMEnabled $TPMEnabled -TPMActive $TPMActive -SetupPwdSet $IsSetupPasswordSet

Which PowerShell code snippet should be inserted at `<< INSERT CODE HERE TO CHECK IF SETUP PASSWORD IS SET >>` to accurately determine if a BIOS Setup Password is set, storing the result (as $true or $false) in the `$IsSetupPasswordSet` variable, using Dell's WMI interface?

10. While inspecting a new Dell OptiPlex desktop chassis after unboxing, a Deployment Technician observes the following:

Observation Notes:

--------------------------------------------------

- Minor scuff mark (approx. 1 cm) on the top plastic panel, does not penetrate paint.

- Front USB port metal shield appears slightly bent inward on one side, but a USB device still inserts.

- Side panel has a noticeable dent (approx. 3 cm diameter, 0.5 cm deep) near the rear corner.

- Power button feels slightly loose but functions when pressed.

--------------------------------------------------

Which of these observations most strongly indicates potential functional impact or significant damage that MUST be reported and likely prevent immediate deployment? (Choose 1.)

11. Scenario: (Continued from Question 2) After the data wipe is completed on a laptop (Service Tag: ASSETWIPE01), the Asset Manager needs to update the central asset management system to reflect its status change from "In Use" to "Retired - Sanitized" and record the date of sanitization. The asset system requires the Service Tag for lookup.

How can the Asset Manager programmatically retrieve the Service Tag from the Dell laptop using standard Windows tools or interfaces, suitable for scripting the update process? (Choose 2.)

12. Scenario: A Deployment Technician is setting up multiple Dell docking stations (Model WD19S) along with new Latitude laptops in a branch office. The standard setup requires connecting the dock to the laptop, monitor, network, and power, ensuring correct cable management for a clean desk policy.

Task: Describe the step-by-step procedure for physically connecting a Dell WD19S docking station to a Dell Latitude laptop, a single external monitor (using DisplayPort), a wired network connection, and its power adapter. Include basic cable management considerations.

Instructions:

1. List the necessary cables (dock's integrated cable, monitor cable, network cable, dock power adapter).

2. Outline the connection sequence for power, monitor, network, and the laptop.

3. Mention basic cable management techniques suitable for an office environment.

Evaluation Criteria:

・ Correctly identifies all required cables/connections.

・ Sequences connections logically, typically starting with peripherals to the dock before connecting the dock to the laptop and power.

・ Specifies the correct port types (e.g., DisplayPort on dock and monitor, USB-C/Thunderbolt for laptop connection, RJ45 for network).

・ Includes connecting the dock's power adapter as a distinct step.

・ Mentions practical cable management (e.g., using Velcro straps, routing cables).

13. Scenario: (Continued from Question 1) The IT Administrator wants to provide Field Technicians with a quick, automated way to verify the Service Tag on a Dell laptop without needing to boot the OS or physically search for the label (which might be worn or inaccessible).

Which method allows retrieval of the Service Tag from a Dell laptop before the operating system boots or without relying on the physical label?

14. Scenario: (Continued from Question 1) The End User successfully suspends BitLocker on the old laptop, and the Dell Migrate pre-checks pass. The user initiates the migration by selecting "Move everything for me." Both laptops are connected to the same home WiFi network. After several hours, the migration completes, but the summary report on the new laptop shows that a significant number of files were skipped.

Upon viewing the details, the user sees many skipped files located in their `OneDrive` folder on the old PC, with reasons like "File not found" or "Access Denied."

What is the most likely reason Dell Migrate skipped these OneDrive files?

15. A Deployment Technician powers on a new Dell laptop briefly as part of the condition check process specifically to inspect the screen.

Which of the following screen issues observed during this brief check should be considered significant defects requiring the laptop to be reported as damaged? (Select all that apply.)

16. The organization decides to streamline driver management by using the Dell Command | Integration Suite for System Center (DCIS). The SCCM Administrator uses DCIS to import Dell driver packs automatically. After importing the Latitude 5420 pack via DCIS, they notice the driver package in SCCM seems functional, but want to understand the underlying mechanism.

How does DCIS typically integrate Dell Driver Packs into SCCM?

17. During testing, the deployment of a Latitude 5420 fails immediately after the 'Apply Driver Package' step, specifically when Windows Setup is finalizing. Reviewing the smsts.log on the client reveals errors related to critical device drivers not being found (e.g., storage or network controller). The administrator confirms the driver package source (\SCCMServerSourcesOSDDriverPacksDellLatitude_5420_W10x64_A05) contains the correct drivers extracted from the DUP.

What are potential causes for these critical drivers failing to install correctly via the 'Apply Driver Package' step? (Select all that apply.)

18. Scenario: (Continued from Question 3) To ensure data integrity and facilitate audits, the Security Analyst specifies that the recorded asset information must be sent securely to the central Asset Management System (AMS), which has a REST API endpoint. The deployment script needs to handle this data transmission.

Which considerations are most important for the Security Analyst when advising the deployment team on scripting the secure transmission of asset data to the AMS REST API? (Select all that apply.)

19. Scenario: (Continued from Question 2) A Field Technician at a branch office reports a discrepancy: a Dell laptop's physical Service Tag matches the work order, but the RAM configuration reported in the BIOS (8GB) differs from the work order specification (16GB).

What are the appropriate immediate actions for the Field Technician according to standard verification procedures? (Select all that apply.)

20. Scenario: A Deployment Technician is migrating user data from an old Windows 10 laptop (SourcePC) to a new Dell Latitude (NewPC) using Dell Migrate. During the pre-check phase on SourcePC, Dell Data Assistant displays an error indicating that BitLocker is enabled on the C: drive and migration cannot proceed. The technician needs to temporarily allow Dell Migrate access without permanently decrypting the entire drive, as per company policy which requires BitLocker to be re-enabled later.

Task: Perform the necessary steps within the Windows 10 GUI on the SourcePC to temporarily suspend BitLocker protection for the C: drive, allowing Dell Migrate to proceed. After suspension, verify the status confirms protection is off.

Instructions:

1. Access the BitLocker management interface.

2. Select the C: drive.

3. Choose the option to suspend protection.

4. Confirm the suspension when prompted.

5. Verify that the status for the C: drive now indicates that protection is suspended.

(Note: Provide the sequence of GUI actions. Exact window names or button text might vary slightly between Windows 10 versions, but the core actions remain the same.)

Evaluation Criteria:

・ Correctly identifies and accesses the BitLocker Drive Encryption control panel/settings.

・ Selects the correct drive (C:).

・ Chooses the "Suspend protection" option (not "Turn off BitLocker").

・ Confirms the action when prompted (e.g., clicks "Yes").

・ Correctly describes how to verify the suspended state (e.g., checking the drive status in the BitLocker management window or the drive icon in File Explorer).

21. Scenario: (Continued from Question 1) The Asset Manager confirms that the company uses a specialized software tool booted from USB to perform the NIST 800-88 Purge. To streamline the process for the 500 laptops, they want to use Dell Command | Configure scripting to set the boot order temporarily to prioritize USB devices.

Which Dell Command | Configure CLI command correctly sets the UEFI boot order to attempt booting from a UEFI USB device first, followed by the internal UEFI Hard Drive?

22. Scenario: A Systems Engineer is designing a zero-touch deployment process using SCCM and Dell tools for new Dell laptops. A key requirement is to automatically capture the Dell Service Tag during the WinPE phase of the SCCM Task Sequence and store it in a Task Sequence variable named ServiceTagVar for later use (e.g., naming the computer).

Task: Write the specific command line(s) needed within a 'Run Command Line' step in the SCCM Task Sequence (running in WinPE) to retrieve the Dell Service Tag using WMI and set it to the ServiceTagVar Task Sequence variable.

Instructions:

1. Use a standard Windows command-line utility available in WinPE (like wmic or PowerShell, assuming PowerShell is included/added to the WinPE image).

2. Query the appropriate WMI class and property to get the Service Tag.

3. Utilize the Task Sequence environment object (TSEnvironment) to set the value to the specified variable ServiceTagVar.

(Note: Provide the command line suitable for direct entry into the 'Run Command Line' step properties in the SCCM Task Sequence editor.)

Evaluation Criteria:

・ Correctly identifies the WMI class and property (Win32_BIOS, SerialNumber).

・ Uses a valid command-line utility (wmic or PowerShell).

・ Correctly parses the output (if using wmic) to isolate the Service Tag value.

・ Correctly uses the Task Sequence COM object (Microsoft.SMS.TSEnvironment) and its Value property (or SetVariable method) to assign the retrieved Service Tag to the ServiceTagVar variable.

・ Provides a command line that is syntactically correct for the SCCM 'Run Command Line' step.

23. Scenario: (Continued from Question 2) Assuming the domain join eventually succeeds after troubleshooting, the SCCM Task Sequence proceeds to install several corporate applications. The End User notices the laptop reboots multiple times during this phase. After the final reboot, the Windows login screen appears.

What typically happens to the stand-alone media content and temporary files used during the Boot-in-Factory (BIF) process once the Task Sequence successfully completes the Post-Delivery phase?

24. Scenario: A Field Technician receives a shipment containing a new Dell Latitude 7420 laptop, docking station, monitor, keyboard, and mouse for an end-user setup. The technician is provided with the following work order excerpt detailing the expected equipment.

Task: Perform the steps necessary to verify the received equipment against the provided work order excerpt.

Instructions:

1. List the physical items you would expect to find based on the work order.

2. Describe the specific actions you would take for each item listed on the work order to ensure it matches the received physical equipment, paying close attention to model numbers and serial/asset tags where specified.

3. State what action should be taken if a discrepancy is found (e.g., wrong model, missing item, incorrect serial number).

Evaluation Criteria:

・ Correctly lists all expected physical items from the work order.

・ Describes the process of physically checking the model number on each received item against the work order list.

・ Describes the process of physically checking the serial number or asset tag on the laptop, docking station, and monitor against the work order list.

・ Correctly identifies that keyboard and mouse verification involves model check but not serial/asset tag check per the work order.

・ Includes a step for reporting discrepancies according to standard procedure (e.g., notifying supervisor, updating ticket).

25. Scenario: (Continued from Question 2) The End User wants to ensure all their OneDrive files, including those skipped previously because they were online-only, are available on the new Dell Latitude. They are already signed into the *same* Microsoft account (linked to OneDrive) on both the old and new PCs.

What actions should the End User take on the *old* PC *before* attempting to retry the Dell Migrate process specifically for the skipped OneDrive files, or alternatively, rely solely on OneDrive sync? (Select all that apply.)

26. A Deployment Technician is verifying a shipment of 10 Dell laptops against a work order. They find 9 laptops match perfectly (Model, Service Tag, Condition OK). The 10th laptop has the correct Model and Service Tag, but during the condition check, the technician discovers the chassis is cracked near the hinge.

Work Order Summary:

---------------------------------------------

Item Count: 10 x Latitude 7430

Service Tags: [List including SVCTAGXYZ09, SVCTAGXYZ10]

Special Instructions: Inspect all units upon arrival. Report discrepancies immediately.

---------------------------------------------

Inspection Log Entry:

---------------------------------------------

Unit 1-9: Match WO, Condition OK.

Unit 10 (SVCTAGXYZ10): Matches WO Model/STag. Physical Damage: Cracked chassis near left hinge.

---------------------------------------------

According to standard deployment procedures for handling discrepancies and damaged goods, what are the essential next steps the technician MUST take regarding the 10th laptop (SVCTAGXYZ10)? (Select all that apply.)

27. Scenario: An IT Administrator is overseeing a large-scale hardware refresh project. New Dell OptiPlex desktops have arrived palletized at the central staging area. Before deployment begins, the administrator needs to ensure each device is correctly set up physically according to standard operating procedures, including connecting peripherals and preparing for initial power-on.

Task: Describe the standard sequence of steps for the physical setup of a new Dell OptiPlex desktop computer in a typical corporate staging environment, from unboxing to readiness for first boot.

Instructions:

List the key physical actions in the correct order. Assume standard peripherals (monitor, keyboard, mouse, power cable, network cable) are available.

Evaluation Criteria:

・ Includes unboxing and inspection.

・ Correctly sequences the connection of peripherals (monitor, keyboard, mouse).

・ Includes connecting the network cable.

・ Correctly places the power cable connection as the final step before power-on.

・ Ensures all connections are secure.

28. During the physical check of a new Dell Latitude laptop, the Deployment Technician carefully examines the various ports.

Which type of port damage would most likely prevent a critical function (like charging or external display) and require the device to be flagged as damaged?

29. Scenario: (Continued from Question 3) The IT Administrator needs to establish a clear procedure for Field Technicians to follow when verifying equipment. Besides matching Service Tags and basic components (RAM, SSD Size often visible in BIOS), the work orders sometimes specify custom configurations applied via Dell Configuration Services (e.g., specific BIOS settings, asset tagging).

How should the IT Administrator advise Field Technicians to verify these custom configuration service items listed on the work order?

30. Following the identification of the correct driver pack DUP file (Latitude-5420-Windows10-A05-XYZ78.exe), the SCCM Administrator needs to integrate these drivers into their existing Windows 10 deployment task sequence. They extract the contents of the DUP file to a network share accessible by SCCM: \SCCMServerSourcesOSDDriverPacksDellLatitude_5420_W10x64_A05.

Which SCCM Task Sequence step type is most appropriate for injecting these model-specific drivers during the deployment process?

31. Scenario: (Continued from Question 2) The Security Analyst is reviewing the deployment process and wants to ensure asset information, including the newly captured TPM and BIOS password status, is recorded *before* the device is potentially encrypted with BitLocker by a later Task Sequence step.

Considering a standard SCCM OSD Task Sequence structure, where should the 'Run Command Line' or 'Run PowerShell Script' step that records the asset information (Service Tag, TPM status, BIOS password status) ideally be placed?

32. Scenario: An IT Administrator needs to automate the configuration of Dell BIOS settings across multiple new Dell OptiPlex systems using PowerShell during deployment. Specifically, they need to ensure Wake-On-LAN (WOL) is enabled. Dell Command | Configure (DCC) tools (`cctk.exe`) are available within the deployment environment (e.g., copied during WinPE or available in the full OS).

Task: Write the PowerShell command(s) required to enable the Wake-On-LAN setting using the Dell Command | Configure (`cctk.exe`) executable. Assume `cctk.exe` is located in the current execution path or specify a path if necessary (e.g., `C:DellDCCcctk.exe`). Also, include the command to verify the setting was applied successfully.

Instructions:

1. Provide the PowerShell command to execute `cctk.exe` with the correct argument(s) to *enable* Wake-On-LAN.

2. Provide the PowerShell command to execute `cctk.exe` with the correct argument(s) to *verify* the current status of the Wake-On-LAN setting.

*(Note: Focus on invoking the cctk executable from within PowerShell.)*

Evaluation Criteria:

- Correctly identifies the `cctk.exe` argument for Wake-On-LAN (`--wakeonlan`).

- Correctly identifies the value required to enable WOL (`enable` or `enablewithpxe`).

- Provides a syntactically correct PowerShell command to execute `cctk.exe` with the enabling argument (e.g., using `&` call operator or `Start-Process`).

- Provides a syntactically correct PowerShell command to execute `cctk.exe` with the argument to read the current WOL setting.

- Assumes standard execution; complex error handling is not required for this lab.

33. Scenario: (Continued from Question 1) The End User connects their laptop to their home WiFi network successfully and clicks "OK" on the network warning prompt. The SCCM Task Sequence resumes. A short while later, a progress bar appears indicating domain join is in progress, but it eventually fails with an error message indicating the domain controller could not be contacted. The user confirms they have internet access.

What common prerequisite for domain join, often handled by a specific task sequence step before the "Join Domain or Workgroup" step in the Post-Delivery phase of a BIF sequence, might be missing or have failed?

34. What is the primary purpose of performing a physical condition check on new Dell equipment immediately upon arrival, before starting any deployment procedures?

35. To ensure the Latitude 5420 driver package is only applied to the correct hardware model, the SCCM Administrator adds a WMI query condition to the 'Apply Driver Package' step. They need to construct a query that accurately identifies the Latitude 5420.

Namespace: rootcimv2

WQL Query: [Administrator needs to enter query here]

Which WQL query should the administrator use in the condition? (Choose 2.)

36. A Deployment Technician receives a pallet of Dell laptops. While inspecting the unopened boxes, they notice one box has a significantly crushed corner and a visible tear.

What should the technician's immediate action be regarding this specific box ?

37. Scenario: (Continued from Question 3) The final step involves handing over the sanitized laptops to the certified e-waste vendor. The Asset Manager needs to ensure compliance with both data security and environmental regulations.

Which steps are essential parts of a compliant and secure handover process for retired IT assets? (Select all that apply.)

38. 1.An SCCM Administrator is tasked with ensu ring the correct drivers are applied during operating system deployment (OSD) for new Dell Latitude 5420 laptops using an SCCM task sequence. The administrator needs to integrate the appropriate Dell driver pack. They have downloaded the latest Driver Pack Catalog (DriverPackCatalog.xml) and need to identify the correct driver pack for Windows 10 x64 for this specific model.

<?xml version="1.0" encoding="utf-8"?>

<DriverPackManifest schemaVersion="1.0" version="24.05.01" dateTime="2024-05-15T10:00:00Z" baseLocation="downloads.dell.com/FOLDER01234567/1/" baseLocationAccessProtocols="http ftp">

<DriverPackage format="DUP" hashMD5="ABC123DEF456" size="512345678" dateTime="2024-05-10T00:00:00Z" vendorVersion="1.0" dellVersion="A05" path="FOLDER01234567/1/Latitude-5420-Windows10-A05-XYZ78.exe" releaseID="XYZ78" type="Win">

<SupportedSystems>

<Brand key="4" prefix="LAT">

<Model systemID="0A9C" name="Latitude 5420"/>

</Brand>

</SupportedSystems>

<SupportedOperatingSystems>

<OperatingSystem osVendor="Microsoft" osArch="x64" majorVersion="10" minorVersion="0" spMajorVersion="0" spMinorVersion="0"/>

</SupportedOperatingSystems>

<Name>

<Display lang="en">Dell Latitude 5420 Windows 10 Driver Pack</Display>

</Name>

</DriverPackage>

<DriverPackage format="DUP" hashMD5="123ABC456DEF" size="480123456" dateTime="2024-04-20T00:00:00Z" vendorVersion="1.0" dellVersion="A02" path="FOLDER09876543/1/Latitude-5420-WinPE10-A02-ABC45.exe" releaseID="ABC45" type="WinPE">

<SupportedOperatingSystems>

<OperatingSystem osVendor="Microsoft" osArch="x64" majorVersion="10" minorVersion="0" spMajorVersion="0" spMinorVersion="0"/>

</SupportedOperatingSystems>

<Name>

<Display lang="en">Dell Latitude 5420 WinPE 10 Driver Pack</Display>

</Name>

</DriverPackage>

</DriverPackManifest>

Which file path correctly identifies the driver pack needed for the Windows 10 OS deployment task sequence?

39. Scenario: (Continued from Question 1) The Intune Administrator uploads a PowerShell script intended to map a network drive. They need to configure the script's execution settings within Intune.

# Script: MapFinanceDrive.ps1

# Purpose: Maps the F: drive to the finance share.

New-PSDrive -Name F -PSProvider FileSystem -Root "\Server1Finance" -Persist

Which setting must the administrator configure correctly within the Intune PowerShell script profile to ensure the script runs with the necessary permissions to potentially map drives for the logged-on user?

40. Scenario: A Deployment Technician receives a pallet of new Dell Latitude laptops for deployment. Before proceeding with any software imaging or configuration, company policy requires a thorough physical inspection of each device to check its condition upon arrival and ensure it hasn't been damaged during transit.

Task: Describe the specific physical checks a Deployment Technician should perform on a new, boxed Dell Latitude laptop to assess its condition upon arrival.

Instructions:

List the key inspection points and the potential issues to look for at each point. Focus only on the external physical condition.

Evaluation Criteria:

- Includes checking the external packaging for damage.

- Includes checking the laptop chassis (lid, base, sides) for cracks, dents, deep scratches, or warping.

- Includes checking ports (USB, HDMI, power, etc.) for physical damage or obstructions.

- Includes checking the screen for cracks, dead pixels (if powered on briefly for check), or severe scratches.

- Includes checking the keyboard and touchpad for damage, loose keys, or sticking keys.

- Includes checking hinges for proper tension and smooth operation.

- Includes verification that basic accessories (e.g., power adapter) are present and undamaged.

- Specifies the action to take if damage is found (e.g., document, quarantine, report).