CompTIA Network+ Certification New N10-008 Dumps With Real Q&As

1. An organization wants to implement a method of centrally managing logins to network services .

Which of the following protocols should the organization use to allow for authentication, authorization and auditing?

2. According to troubleshooting methodology, which of the following should the technician do NEXT after determining the most likely probable cause of an issue?

3. Which of the following policies is MOST commonly used for guest captive portals?

4. A branch of a company recently switched to a new ISP. The network engineer was given a new IP range to assign.

The ISP assigned 196.26.4.0/26, and the branch gateway router now has the following configurations on the interface that peers to the ISP:

The network engineer observes that all users have lost Internet connectivity .

Which of the following describes the issue?

5. At which of the following OSI model layers would a technician find an IP header?

6. An IT organization needs to optimize speeds for global content distribution and wants to reduce latency in high-density user locations .

Which of the following technologies BEST meets the organization’s requirements?

7. Must be vendor neutral

Which of the following methods should the engineer select?

8. The network administrator is informed that a user’s email password is frequently hacked by brute-force programs .

Which of the following policies should the network administrator implements to BEST mitigate this issue? (Choose two.)

9. A network administrator has been directed to present the network alerts from the past week to the company's executive staff .

Which of the following will provide the BEST collection and presentation of this data?

10. A user tries to ping 192.168.1.100 from the command prompt on the 192.168.2.101 network but gets the following response: U.U.U.U .

Which of the following needs to be configured for these networks to reach each other?

11. A company wants to implement a large number of WAPs throughout its building and allow users to be able to move around the building without dropping their connections.

Which of the following pieces of equipment would be able to handle this requirement?

12. A technician is connecting multiple switches to create a large network for a new office. The switches are unmanaged Layer 2 switches with multiple connections between each pair. The network is experiencing an extreme amount of latency .

Which of the following is MOST likely occurring?

13. A technician is configuring a network switch to be used in a publicly accessible location .

Which of the following should the technician configure on the switch to prevent unintended connections?

14. Which of the following technologies allows traffic to be sent through two different ISPs to increase performance?

15. A network technician is investigating an IP phone that does not register in the VoIP system Although it received an IP address, it did not receive the necessary DHCP options. The information that is needed for the registration is distributes by the OHCP scope All other IP phones are working properly .

Which of the following does the technician need to verify?

16. A network engineer performs the following tasks to increase server bandwidth:

Connects two network cables from the server to a switch stack

Configure LACP on the switchports

Verifies the correct configurations on the switch interfaces

Which of the following needs to be configured on the server?

17. A user reports a weak signal when walking 20ft (61 m) away from the WAP in one direction, but a strong signal when walking 20ft in the opposite direction. The technician has reviewed the configuration and confirmed the channel type is correct There is no jitter or latency on the connection.

Which of the following would be the MOST likely cause of the issue?

18. A technician needs to configure a Linux computer for network monitoring.

The technician has the following information:

Linux computer details:

Switch mirror port details:

After connecting the Linux computer to the mirror port on the switch, which of the following commands should the technician run on the Linux computer?

19. A network technician has multimode fiber optic cable available in an existing IDF .

Which of the following Ethernet standards should the technician use to connect the network switch to the existing fiber?

20. Atechnician is installing a high-density wireless network and wants to use an available frequency that supports the maximum number of channels to reduce interference .

Which of the following standard 802.11 frequency ranges should the technician look for while reviewing WAP specifications?

21. A network is experiencing a number of CRC errors during normal network communication.

At which of the following layers of the OSI model will the administrator MOST likely start to troubleshoot?

22. A technician receives feedback that some users are experiencing high amounts of jitter while using the wireless network. While troubleshooting the network, the technician uses the ping command with the IP address of the default gateway and verifies large variations in latency. The technician thinks the issue may be interference from other networks and non-802.11 devices .

Which of the following tools should the technician use to troubleshoot the issue?

23. A workstation is configured with the following network details:

Software on the workstation needs to send a query to the local subnet broadcast address.

To which of the following addresses should the software be configured to send the query?

24. A company that uses VoIP telephones is experiencing intermittent issues with one-way audio and dropped conversations. The manufacturer says the system will work if ping times are less than 50ms.

The company has recorded the following ping times:

Which of the following is MOST likely causing the issue?

25. A network administrator redesigned the positioning of the APs to create adjacent areas of wireless coverage. After project validation, some users still report poor connectivity when their devices maintain an association to a distanced AP .

Which of the following should the network administrator check FIRST?

26. A network technician is reviewing an upcoming project's requirements to implement laaS .

Which of the following should the technician consider?

27. The following configuration is applied to a DHCP server connected to a VPN concentrator:

There are 300 non-concurrent sales representatives who log in for one hour a day to upload reports, and 252 of these representatives are able to connect to the VPN without any Issues. The remaining sales representatives cannot connect to the VPN over the course of the day .

Which of the following can be done to resolve the issue without utilizing additional resources?

28. A network technician is installing an analog desk phone for a new receptionist After running a new phone line, the technician now needs to cnmp on a new connector .

Which of the following connectors would MOST likely be used in this case?

29. Which of the following can be used to centrally manage credentials for various types of administrative privileges on configured network devices?

30. A network administrator is implementing OSPF on all of a company’s network devices .

Which of the following will MOST likely replace all the company’s hubs?

31. After the A record of a public website was updated, some visitors were unable to access the website .

Which of the following should be adjusted to address the issue?

32. A network device is configured to send critical events to a syslog server; however, the following alerts are not being received:

Severity 5 LINK-UPDOWN: Interface 1/1, changed state to down

Severity 5LINK-UPDOWN: Interface 1/3, changed state to down

Which of the following describes the reason why the events are not being received?

33. A network technician was troubleshooting an issue for a user who was being directed to cloned websites that were stealing credentials. The URLs were correct for the websites but an incorrect IP address was revealed when the technician used ping on the user's PC After checking the is setting, the technician found the DNS server address was incorrect.

Which of the following describes the issue?

34. A city has hired a new employee who needs to be able to work when traveling at home and at the municipal sourcing of a neighboring city that snares services. The employee is issued a laptop, and a technician needs to train the employee on the appropriate solutions for secure access to the network from all the possible locations.

On which of the following solutions would the technician MOST likely train the employee?

35. Access to a datacenter should be individually recorded by a card reader even when multiple employees enter the facility at the same time .

Which of the following allows the enforcement of this policy?

36. Which of the following DNS records works as an alias to another record?

37. A network administrator wants to improve the security of the management console on the company's switches and ensure configuration changes made can be correlated to the administrator who conformed them.

Which of the following should the network administrator implement?

38. An engineer is configuring redundant network links between switches .

Which of the following should the engineer enable to prevent network stability issues?

39. Several WIFI users are reporting the inability to connect to the network. WLAN users on the guest network are able to access all network resources without any performance issues.

The following table summarizes the findings after a site survey of the area in question:

Which of the following should a wireless technician do NEXT to troubleshoot this issue?

40. A technician is writing documentation regarding a company’s server farm. The technician needs to confirm the server name for all Linux servers .

Which of the following commands should the technician run?

41. A client recently added 100 users who are using VMs. All users have since reported slow or unresponsive desktops. Reports show minimal network congestion, zero packet loss, and acceptable packet delay .

Which of the following metrics will MOST accurately show the underlying performance issues? (Choose two.)

42. Which of the following is the LARGEST MTU for a standard Ethernet frame?

43. A technician is troubleshooting a network switch that seems to stop responding to requests intermittently whenever the logging level is set for debugging .

Which of the following metrics should the technician check to begin troubleshooting the issue?

44. Which of the following security devices would be BEST to use to provide mechanical access control to the MDF/IDF?

45. A company built a new building at its headquarters location. The new building is connected to the company’s LAN via fiber-optic cable. Multiple users in the new building are unable to access the company’s intranet site via their web browser, but they are able to access internet sites .

Which of the following describes how the network administrator can resolve this issue?

46. Which of the following provides redundancy ona file server to ensure the server is still connected to a LAN even in the event of a port failure on a switch?

47. An IDS was installed behind the edge firewall after a network was breached. The network was then breached again even though the IDS logged the attack .

Which of the following should be used in place of these devices to prevent future attacks?

48. A corporation has a critical system that would cause unrecoverable damage to the brand if it was taken offline .

Which of the following disaster recovery solutions should the corporation implement?

49. Which of the following TCP ports is used by the Windows OS for file sharing?

50. A local firm has hired a consulting company to clean up its IT infrastructure. The consulting company notices remote printing is accomplished by port forwarding via publicly accessible IPs through the firm's firewall.

Which of the following would be the MOST appropriate way to enable secure remote printing?