SK0-005 Dumps Updated (V11.02) – Best Materials For Passing CompTIA Server+ Certification Exam

1. A datacenter in a remote location lost power. The power has since been restored, but one ol the servers has not come back online. After some investigation, the server is found to still be powered off .

Which of the following is the BEST method to power on the server remotely?

2. A technician is connecting a server’s secondary NIC to a separate network. The technician connects the cable to the switch but then does not see any link lights on the NIC. The technician confirms there is nothing wrong on the network or with the physical connection .

Which of the following should the technician perform NEXT?

3. A company wants to deploy software to all users, Out very few of men will be using the software at any one point in time .

Which of the following licensing models would be BEST lot the company?

4. Which of me following should be placed at the top of a Bash script to ensure it can be executed?

5. Users at a company work with highly sensitive data. The security department implemented an administrative and technical control to enforce least-privilege access assigned to files. However, the security department has discovered unauthorized data exfiltration .

Which of the following is the BEST way to protect the data from leaking?

6. CORRECT TEXT

A technician is attempting to reboot a remote physical Linux server. However, attempts to command a shutdown -----now result in the loss of the SSH connection. The server still responds to pings .

Which of the following should the technician use to command a remote shutdown?

A virtual serial console

B. A KVM

C. An IDRAC

D. A crash cart

7. Following a recent power outage, a server in the datacenter has been constantly going offline and losing its configuration. Users have been experiencing access issues while using the application on the server. The server technician notices the data and time are incorrect when the server is online. All other servers are working .

Which of the following would MOST likely cause this issue? (Choose two.)

8. A technician has received multiple reports of issues with a server. The server occasionally has a BSOD, powers off unexpectedly, and has fans that run continuously .

Which of the following BEST represents what the technician should investigate during troubleshooting?

9. Ann, an administrator, is configuring a two-node cluster that will be deployed. To check the cluster’s functionality, she shuts down the active node. Cluster behavior is as expected, and the passive node is now active. Ann powers on the server again and wants to return to the original configuration .

Which of the following cluster features will allow Ann to complete this task?

10. Which of the following access control methodologies can be described BEST as allowing a user the least access based on the jobs the user needs to perform?

11. When configuring networking on a VM, which of the following methods would allow multiple VMs to share the same host IP address?

12. A technician is trying to determine the reason why a Linux server is not communicating on a network.

The returned network configuration is as follows:

eth0: flags=4163<UP, BROADCAST,RUNNING,MULTICAST> mtu 1500

inet 127.0.0.1 network 255.255.0.0 broadcast 127.0.0.1

Which of the following BEST describes what is happening?

13. A server administrator receives a report that Ann, a new user, is unable to save a file to her home directory on a server.

The administrator checks Ann’s home directory permissions and discovers the following:

dr-xr-xr-- /home/Ann

Which of the following commands should the administrator use to resolve the issue without granting unnecessary permissions?

14. A server technician installs a new NIC on a server and configures the NIC for IP connectivity. The technician then tests the connection using the ping command.

Given the following partial output of the ping and ipconfig commands:

Which of the following caused the issue?

15. A server technician has been asked to upload a few files from the internal web server to the internal FTP server. The technician logs in to the web server using PuTTY, but the connection to the FTP server fails. However, the FTP connection from the technician’s workstation is sucessful.

To troubleshoot the issue, the technician executes the following command on both the web server and the workstation:

ping ftp.acme.local

The IP address in the command output is different on each machine .

Which of the following is the MOST likely reason for the connection failure?

16. Which of the following are measures that should be taken when a data breach occurs? (Select TWO).

17. A company has implemented a requirement to encrypt all the hard drives on its servers as part of a data loss prevention strategy .

Which of the following should the company also perform as a data loss prevention method?

18. A technician wants to limit disk usage on a server .

Which of the following should the technician implement?

19. A server administrator is exporting Windows system files before patching and saving them to the following location:

\server1ITDept

Which of the following is a storage protocol that the administrator is MOST likely using to save this data?

20. A backup application is copying only changed files each line it runs. During a restore, however, only a single file is used .

Which of the following backup methods does this describe?

21. Modify the appropriate route entries to resolve the Internet connectivity issue.

If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

22. An administrator is investigating a physical server mat will not Boot into the OS. The server has three hard drives configured in a RAID 5 array. The server passes POST, out the OS does not load. The administrator verities the CPU and RAM are Doth seated correctly and checks the dual power supplies. The administrator then verifies all the BIOS settings are correct and connects a bootable USB drive in the server, and the OS loads correctly .

Which of the following is causing the issue?

23. A server administrator has configured a web server .

Which of the following does the administrator need to install to make the website trusted?

24. A server administrator is experiencing difficulty configuring MySQL on a Linux server.

The administrator issues the getenforce command and receives the following output:

># Enforcing

Which of the following commands should the administrator issue to configure MySQL successfully?

25. A systems administrator is setting up a server on a LAN that uses an address space that follows the RFC 1918 standard .

Which of the following IP addresses should the administrator use to be in compliance with the standard?

26. A technician needs to deploy an operating system that would optimize server resources .

Which of the following server installation methods would BEST meet this requirement?

27. A global organization keeps personnel application servers that are local to each country. However, a security audit shows these application servers are accessible from sites in other countries .

Which of the following hardening techniques should the organization use to restrict access to only sites that are in the same country?

28. A systems administrator is preparing to install two servers in a single rack. The administrator is concerned that having both servers in one rack will increase the chance of power issues due to the increased load .

Which of the following should the administrator implement FIRST to address the issue?

29. A server administrator is deploying a new server that has two hard drives on which to install the OS .

Which of the following RAID configurations should be used to provide redundancy for the OS?

30. A server room with many racks of servers is managed remotely with occasional on-site support .

Which of the following would be the MOST cost-effective option to administer and troubleshoot network problems locally on the servers?

31. Which of the following tools will analyze network logs in real time to report on suspicious log events?

32. A server administrator wants to run a performance monitor for optimal system utilization .

Which of the following metrics can the administrator use for monitoring? (Choose two.)

33. A server administrator needs to create a new folder on a file server that only specific users can access .

Which of the following BEST describes how the server administrator can accomplish this task?

34. An administrator is configuring a server that will host a high-performance financial application .

Which of the following disk types will serve this purpose?

35. A server is reporting a hard drive S.M.A.R.T. error. When a technician checks on the drive, however, it appears that all drives in the server are functioning normally .

Which of the following is the reason for this issue?

36. Which of the following would a systems administrator implement to ensure all web traffic is secure?

37. A server administrator has been creating new VMs one by one. The administrator notices the system requirements are very similar, even with different applications .

Which of the following would help the administrator accomplish this task in the SHORTEST amount of time and meet the system requirements?

38. A server administrator was asked to build a storage array with the highest possible capacity .

Which of the following RAID levels should the administrator choose?

39. A server administrator has noticed that the storage utilization on a file server is growing faster than planned. The administrator wants to ensure that, in the future, there is a more direct relationship between the number of users using the server and the amount of space that might be used .

Which of the following would BEST enable this correlation?

40. A user cannot save large files to a directory on a Linux server that was accepting smaller files a few minutes ago .

Which of the following commands should a technician use to identify the issue?

41. A systems administrator is setting up a new server that will be used as a DHCP server. The administrator installs the OS but is then unable to log on using Active Directory credentials. The administrator logs on using the local administrator account and verifies the server has the correct IP address, subnet mask, and default gateway. The administrator then gets on another server and can ping the new server .

Which of the following is causing the issue?

42. A server technician is configuring the IP address on a newly installed server. The documented configuration specifies using an IP address of 10.20.10.15 and a default gateway of 10.20.10.254 .

Which of the following subnet masks would be appropriate for this setup?

43. A user reports that a server is not accessible. A technician sees the following message on the server: PXE server not found .

Which of the following should the technician attempt FIRST to resolve the issue?

44. Users in an office lost access to a file server following a short power outage. The server administrator noticed the server was powered off .

Which of the following should the administrator do to prevent this situation in the future?

45. A technician is configuring a server that requires secure remote access .

Which of the following ports should the technician use?

46. A technician is laying out a filesystem on a new Linux server .

Which of the following tools would work BEST to allow the technician to increase a partition's size in the future without reformatting it?

47. After configuring IP networking on a newly commissioned server, a server administrator installs a straight- through network cable from the patch panel to the switch. The administrator then returns to the server to test network connectivity using the ping command.

The partial output of the ping and ipconfig commands are displayed below:

The administrator returns to the switch and notices an amber link light on the port where the server is connected .

Which of the following is the MOST likely reason for the lack of network connectivity?

48. Which of the following policies would be BEST to deter a brute-force login attack?

49. A server administrator needs to keep a copy of an important fileshare that can be used to restore the share as quickly as possible .

Which of the following is the BEST solution?

50. A company stores extremely sensitive data on an alt-gapped system .

Which of the following can Be Implemented to increase security against a potential insider threat?

51. An administrator needs to disable root login over SSH .

Which of the following tiles should be edited to complete this task?

52. Which of the following, if properly configured, would prevent a user from installing an OS on a server? (Select TWO).

53. Which of the following documents would be useful when trying to restore IT infrastructure operations after a non-planned interruption?

54. A technician needs to install a Type 1 hypervisor on a server. The server has SD card slots, a SAS controller, and a SATA controller, and it is attached to a NAS.

On which of the following drive types should the technician install the hypervisor?

55. Which of the following steps in the troubleshooting theory should be performed after a solution has been implemented? (Choose two.)

56. A snapshot is a feature that can be used in hypervisors to:

57. A server administrator is testing a disaster recovery plan. The test involves creating a downtime scenario and taking the necessary steps .

Which of the following testing methods is the administrator MOST likely performing?

58. The Chief Information Officer (CIO) of a datacenter is concerned that transmissions from the building can be detected from the outside .

Which of the following would resolve this concern? (Choose two.)

59. A technician is deploying a single server to monitor and record me security cameras at a remote site, which of the following architecture types should be used to minimize cost?

60. Which of the following BEST measures now much downtime an organization can tolerate Curing an unplanned outage?