New NetApp NCDA ONTAP Certification NS0-161 Dumps Questions

1. You want to create a FlexGroup volume that contains four aggregates with eight constituents each. In this scenario, what is the value of the aggregate list multiplier?

2. You want to asynchronously replicate an SVM's volumes and configuration to another NetApp cluster.

Which data protection technology accomplishes this task?

3. What are three advantages of configuring network subnets?

(Choose three.)

4. What is the maximum number of nodes in a cluster that the Cisco Nexus 5010 supports?

5. Which aggregate type is supported for Flash Pool?

6. You want to enable jumbo frames on a NetApp storage system.

Which network object would you modify to accomplish this task?

7. What is the maximum number of node a SAN cluster in Data ONTAP 9 can have?

8. Which three statements are true for mailbox disks per node in an HA pair?

(Choose three.)

9. What is an array LUN?

10. What is the compression group size for adaptive compression?

11. Which NetApp tool is used to perform a configuration validation and health check that includes a highavailability setup?

12. A storage administrator moves a LUN from one volume to another In this scenario, what is left behind in the volume?

13. You must create a CIFS share for a replicated destination volume for read-only access to the files. In this scenario, which task must be completed before you create the share?

14. You use the Automated Workload Analyzer (AWA) to identify workloads that would benefit from which feature?

15. For NDMP to be aware of a vserver, what actions needs to be taken?

(choose three)

16. Which two NFS versions are supported on clustered Data ONTAP 9?

(Choose two.)

17. What is the maximum number of nodes a NAS cluster can have?

18. A customer has an aggregate, aggr1_01 with three RAID groups: rg0, rg1, and rg2. Each RAID group has 15 disks, and the aggregate’s maximum RAID group size is set to 18 disks.

The customer adds three additional disks to the aggregate using the following command:

storage aggregate add-disks Caggregate aggr1_01 Cdiskcount 3

How are the RAID groups affected by this command?

19. Exhibit:

On the first LUN entry shown in the exhibit, a hyphen (-) appears under reporting-nodes.

What are two reasons why the hyphen appears?

(Choose two.)

20. What is a characteristic of a single-node cluster?

21. Which logical interface does not have migration nor failover migration capabilities?

22. What should an administrator do first before shutting down two nodes of a 4-node cluster?

23. You are replacing a FAS system that has several DS4243 disk shelves. The new system is an AFF A300. You want to reuse the DS4243 disk shelves with your new AFF A300.

In this situation, which NetApp tool would you use to confirm if the task is possible?

24. You have a cluster with a node running root data partitioning and need to grow the aggregate for additional data volumes.

What is NetApp’s best practice for increasing the aggregate size to optimize performance?

25. What are two capabilities of Vserver setup?

(Choose two)

26. Which two statements are true when you restore a volume from a Snapshot copy?

(Choose two.)

27. Exhibit:

You execute the cluster1::> network ipspace showcommand, and notice that two IPspaces are not able to be renamed or deleted. Referring to the exhibit, what are these two IPspaces?

(Choose two.)

28. Which statement is true about expanding an aggregate from 32-bit to 64-bit in place?

29. Exhibit:

You create a volume as shown in the exhibit.

Which statement about the new volume is true?

30. Exhibit:

You have a Windows 10 computer that lost an SMB drive mapping that used the IP address of your SVM. The mapping was working until security requirements disabled NTLM authentication. Windows Server 2019 servers remained connected to the drive mapping.

Referring to the exhibit, what is the reason for this problem?

31. A volume is created named vs2_vol2 on aggregate netappu-02. It is mounted in the vs2 namespace at /vs2/vol2. Volume move moves this volume to the netappu-01 aggregate.

What is the path to this volume after the move?

32. You are provisioning a LUN for a new host. In this scenario, which three objects must exist?

(Choose three.)

33. Which NetApp cluster configuration requires the use of epsilon?

34. When you deduplicate a thick-provisioned volume, in which area will you see space savings when using a df command?

35. An administrator is configuring an aggregate to use FabricPool to take advantage of auto tiering. In this scenario, what are three requirements to accomplish this task?

(Choose three.)

36. Which FabricPool policy would you apply only on a SnapMirror destination volume?

37. An SVM is configured to authenticate SVM administrators with the access method set to Password. A computer account for the SVM exists on the Active Directory domain controller. You are now required to authenticate administrators trough domain.

Which two steps are required to accomplish this task?

(Choose two.)

38. A customer’s Linux Oracle database requires a SAN solution with multiple FC connections for path resiliency and performance. The host has been provisioned with two dual-port FC HBAs, and each HBA is connected to each fabric.

Before configuring the storage, what host information should the storage administrator obtain from the customer?

(Choose two.)

39. Which Data ONTAP Cluster-Mode clone technology can clone an individual LUN Inside a volume without cloning the entire volume?

40. Exhibit:

Referring to the exhibit, which two statements are true?

(Choose two.)

41. Which two LIFs are able to failover or migrate to other nodes in the cluster?

(Choose two.)

42. Exhibit:

You use DNS zone delegation to access an SVM that is set up for on-box DNS to nfs1.netapp.com. You can ping both lif1 and lif2 by IP address, but you can only ping lif1 by the delegated DNS name nfs1.netapp.com.

Referring to the exhibit, what must you do to allow on-box DNS access to lif2?

43. What are the three types of resources supported by Logical interfaces?

(Choose three.)

44. You are running out of space on an aggregate and decide to move a FlexVol volume to a different aggregate. You do not want to move the Snapshot copies with the volume.

Which two actions satisfy your requirement?

(Choose two.)

45. Which components are required to create an ONTAP Cloud HA configuration in Amazon Web Services (AWS)?

46. A storage administrator currently has an 8-node FAS8200 cluster with CIFS, NFS, and iSCSI licenses installed. In this scenario, how many additional nodes are supported?

47. From the output of the command “network interface show”, the logical interface that has a value of “false” under the “Is Home” column signifies it

(choose all that apply)

48. With clustered Data ONTAP 9 or later, an administrator may use NDMP commands at which two levels?

(Choose Two)

49. On your customer's AFF A700, there are multiple volumes within the aggregate aggr1. Within aggr1, volumes vol1, vol2, and vol3 store similar data, and volumes vol4 and vol5 store unique data.

In this scenario, which feature would improve storage efficiency with the data stored in volumes vol1, vol2, and vol3?

50. For RAID-DP root aggregates created with clustered Data ONTAP 9 or later, what is the default minimum number of disks?

51. You acquired a new company that has the same private IP address range.

What must be set up on the NetApp cluster to support the duplicate networks?

52. Exhibit:

A customer has a new ASA platform but cannot get the target FC ports to show up in ONTAP System Manager. Referring to the exhibit, what would cause this problem?

53. What are the four replicated database rings in a cluster?

(choose four)

54. A storage administrator has a Linux Oracle database that is using a SAN configuration with multiple dualported FC HBA connections for path resiliency and performance. The HBA ports are configured to separate FC switches.

Before configuring the LUNs from the storage, what information must be obtained from the host?

(Choose three.)

55. Which command would you use to enable the ONTAP HA feature?

56. A customer created a volume with the wrong language code.

What should a customer do to correct this problem?

57. What will the storage aggregate create Caggregate aggr0_rg0 Cdiskcount 40 Cmaxraidsize 20 Cnodes cl-01 Cdisktype SAS command do?

58. A customer wants to improve write performance on their FAS2552 HA system. The system is built with SAS drives, and they are not interested in purchasing additional disk shelves.

The workload consists of mostly small, random overwrites and random reads.

What should the customer do to improve performance?

59. Which two switches are supported cluster switches?

(Choose two)

60. What are the LIF roles that can be assigned to ports in clustered ONTAP?

(choose all that apply)

61. Which two LIF role types allow LIF migration among nodes?

(Choose two.)

62. Which failover policy is set by default on an iSCSI LIF?

63. With clustered Data ONTAP 9 or later, which SAN component will no longer be supported?

64. Which types of LIFs can be assigned a user-defined failover group?

(choose all that apply)

65. Which four steps must an administrator take before establishing a CIFS share?

(Choose four)

66. A storage administrator is not receiving performance alerts on an OnCommand Unified Manager policy that was created for a NAS volume.

Which additional task is required to solve this problem?

67. An administrator has a FlexGroup volume configured on a 4-node FAS8200 cluster. New nodes have been added to the cluster, and the administrator wants to improve performance on the FlexGroup volume using the new nodes.

Additionally, the FlexGroup volume size needs to increase to accommodate new workloads.

Which command would satisfy the requirements in the scenario?

68. What feature balances load across a cluster while consuming less disk capacity than LS SnapMirror copies?

69. Which type of upgrade is supported from a single-node FAS2552 to a dual-node cluster with clustered Data ONTAP 9 when all 10 GB ports are used for host access?

70. Administrator can natively run Data ONTAP-7Mode commands in what shell?

71. Which three privileges are available to the vsadmin role?

(Choose three.)

72. What are two causes of a storage failover partial giveback?

(Choose two.)

73. Which of the following statements are true about data protection mirrors?

(Choose all that apply)

74. In which shell can administrators natively run Data ONTAP 7-mode commands?

75. What are three types of shells that are used in ONTAP?

(Choose three.)

76. You have a 4-node cluster serving home directories over two IPs per node.

Which two methods would you use to set up DNS load balancing over a single name to the eight IP addresses?

(Choose two.)

77. What is the minimum version of clustered Data ONTAP that supports shelf hot-remove?

78. Click on the exhibit at the right.

The exhibit shows the Configuration Updates section of System Manager.

Which two actions would you complete from this section?

(Choose two.)

79. An administrator has two volumes named voldata1 and voldata2. Each volume resides in a Flash Pool aggregate and is assigned to the auto caching policy.

Due to the type of workload that voldata1 stores, data needs to remain in the Flash Pool cache for longer periods of time than cache data from other volumes.

Based on this scenario, which cache retention policy should be used for voldata1?

80. A customer enables Storage Efficiency on a volume, intending to use compression only as data is written.

The customer observes that compression is working, but deduplication processes are still running on a scheduled basis. The customer wants to use compression without deduplication as the data is written to the volume.

Which action will accomplish this task?