Network Application NCIE-Data Protection NS0-525 Exam Dumps

NetApp Certified Implementation Engineer—Data Protection Specialist certification requires you successfully obtain NetApp Certified Data Administrator, ONTAP (NCDA) certification, then pass NS0-525 NetApp Certified Implementation Engineer—Data Protection exam. Currently, we have Network Application NCIE-Data Protection NS0-525 Exam Dumps, which is the best materials for clearing NetApp NS0-525 exam. We have 124 practice questions and answers, you need to read all of them carefully to ensure that you can answer NS0-525 exam smoothly.

Check Free NetApp NS0-525 Dumps Questions Online First

1. Which two policies would allow an administrator to configure disaster recovery and archiving in the same destination volume? (Choose two.)


2. You have a 2-node FAS9000 cluster that must replicate to a 2-node AFF A300 cluster. Both clusters use self-encrypting drives (SEDs) and need to encrypt all data at rest using centralized key management.

Which two features accomplish this task? (Choose two.)


3. You notice that after you delete data from your FlexVol volume, some Snapshot copies have also been deleted. Snapshot auto delete is enabled.

Which volume autosize mode must be enabled for this behavior to occur?


4. You want to set up protection relationships at the time of provisioning one or more primary volumes in the source cluster in ONTAP.

Which NetApp management tool enables you to accomplish this task?


5. Which OnCommand Workflow Automation (WFA) feature allows users to download prebuilt WFA packs?


6. A customer has a MetroCluster solution and wants to automate the disaster-recovery process. The customer wants to control the switchcover between the sites.

Which NetApp tool would satisfy these requirements?


7. What does the metrocluster configuration-settings interface createcommand do?


8. You are using OnCommand Unified Manager to monitor the health and availability of your data protection relationships.

In this situation, what must be added to enable you to create, break, and resynchronize relationships?


9. You are maintaining a 4-node MetroCluster.

How are the high-availability interconnects cabled?


10. You have deployed the DP_Optimized (DPO) license on the destination cluster to support a high number of volumes and peer relationships for setting up data protection with multiple source clusters. You want to obtain a list of unprotected volumes on the source cluster and protect them.

Which two management tools would be used to accomplish this task? (Choose two.)


11. Synchronous replication is available for which two NetApp solutions? (Choose two.)


12. A customer has setup an SVM DR relationship to provide disaster recovery capability at the SVM level. The secondary site has a different network configuration. They want to replicate the protocol and services configuration of the primary SVM to the secondary SVM when creating the SVM DR relationship.

Which two actions will accomplish this task? (Choose two.)


13. A company is evaluating different data protection solutions. The company requires a solution that provides both local failover and storage tiering.

Which two solutions meet these requirements? (Choose two.)


14. You are configuring SnapMirror on the NetApp Cloud Backup appliance (formerly AltaVault).

In this scenario, which LIF type IP addresses must be white listed?


15. A client has a 100 GB NFS volume with a 20% Snapshot reserve that hosts several virtual machines on an aggregate with no additional capacity. There are currently 10 GB of Snapshot copies associated with the past two weeks of actvivty with the volume. An external monitoring system is reporting that the volume is 99% consumed.

According to NetApp, which action should be used to prevent the volume from going offline?


16. In a MetroCluster IP configuration, which two network ports must be connected to dedicated switches? (Choose two.)


17. Click the Exhibit button.

An employee’s computer and mapped home folder has been encrypted with ransomware. You are asked to restore the data from a SnapVault repository.

Referring to the exhibit, what happens when the volume is restored?


18. Click the Exhibit button.

Commvault IntelliSnap and NetApp SnapCenter are both being used to back up the same Microsoft SQL Server database.

Referring to the exhibit, which action will SnapCenter perform on the Microsoft SQL transaction logs?


19. A customer wants to monitor the current utilization of storage capacity to ensure storage availability. They decide to implement quotas on some volumes.

What are three types of quotas that would satisfy the customer’s requirement? (Choose three.)


20. Using SnapCenter 4.0, you are restoring a virtual machine.

Which additional tool would be used to monitor the restore?


21. A client has a VMware vSphere environment with several MS SQL servers currently running that provides back-end Web services. You are asked to prepare a disaster recovery solution that would minimize downtime if any of these virtual machines become corrupted and unavailable.

Which solution will satisfy the requirement?


22. You are asked to select a controller platform as a backup target with support for 40GbE, 32 Gbps FC, and the ability to attach three stacks of disk shelves.

Which tool would you use to find the information that you need?


23. Click the Exhibit button.

You have a volume that was configured a year ago using the default Snapshot policy that is shown in the exhibit. You need to increase the number of weekly maximum Snapshot copies to retain eight copies.

Which additional action is needed to have eight weekly Snapshot copies in this volume after modifying the schedule?


24. You have experienced a disaster at your source site and activated SVM DR. The source site is now up, but your source SVMs no longer exist. You must restore data to the original source and maintain the SVM DR configuration.

Which two steps must be taken to accomplish this task? (Choose two.)


25. You have deployed a MetroCluster IP disaster recovery solution for cross-site protection and business continuity operations.

In this scenario, which two statements are correct? (Choose two.)


26. The volume efficiency modify command, enables which three storage efficiency technologies when applied to a FlexVol volume? (Choose three.)


27. Which two statements are correct about MetroCluster IP requirements for intercluster LIFs? (Choose two.)


28. A storage system is running low on space, and you enable a Snapshot autodelete policy on a volume. You need to replicate Snapshot copies to another storage system before they are deleted.

Which two SnapMirror policies would retain the deleted Snapshot copies? (Choose two.)


29. Which two NetApp tools would be used to set up protection relationships between a SolidFire cluster and an ONTAP cluster? (Choose two.)


30. You must create and establish schedules for NetApp Snapshot copies and NetApp SnapMirror replication mirrors, and you need to manage them from a centralized location.

Which two products would satisfy the requirements? (Choose two.)


31. Click the Exhibit button.

Referring to the exhibit, which setting specifies the point that the vol_sanluns01dev_01 volume will increase in size?


32. A company has implemented a MetroCluster cluster. The company wants to use MetroCluster TieBreaker to monitor and detect failures of the cluster.

In this situation, which three components are monitored? (Choose three.)


33. You have recently installed and set up a new NetApp HCI deployment in your data center that consists of four compute nodes and four storage nodes. Inside this HCI deployment, you are using ONTAP Select for file services. You must protect the data inside the ONTAP Select VM in case of a rack failure.

Which two methods would accomplish this task? (Choose two.)


34. Click the Exhibit button.

You are configuring a SnapMirror relationship to capture all daily activities and archive them. Information about the environment is shown in the exhibit.

In this scenario, how much data must be transferred during the scheduled SnapMirror update?


35. You want to implement a cross-site disaster recovery solution for a mission critical business application that can provide a near zero recovery time objective (RTO) and recovery point objective (RPO). You want to use the existing high-bandwidth dedicated Ethernet and IP infrastructure for replication between the two sites.

Which NetApp solution meets these business requirements?


36. You just created a mirror relationship using OnCommand System Manager in ONTAP 9.3. You review the relationship using the CLI.

In this scenario, what is the expected type and default SnapMirror policy?


37. Click the Exhibit button.

You have data corruption in a volume, and you are asked to restore the data from a SnapVault destination.

Referring to the exhibit, which two actions occur when the volume is restored? (Choose two.)


38. To ensure enough bandwidth for other applications, you want to restrict all replication bandwidth on your destination cluster.

How would you accomplish this task?


39. You are planning on archiving 200 TB of data with SnapVault to an ONTAP Cloud Instance.

Which NetApp tool manages your Bring Your Own License (BYOL)?


40. You have a project that requires off-site backup for selected data volumes, but another physical site or system is not within the current budget.

Which NetApp product would help you to satisfy this requirement?


41. You are asked to size an ONTAP disaster recovery and backup cluster. You are required to use 4 x 40 Gb Ethernet ports per controller and 4 x 32 Gb FC ports per controller. You also need to confirm support for Commvault IntelliSnap for NetApp v11.

In this scenario, which two tools would confirm these requirements? (Choose two.)


42. A client has a primary data center that is located in a coastal area where the forecast is calling for a Category 5 hurricane to make landfall in three days. The client’s data is protected using NetApp SVM SnapMirror replication technology with identity-preserve that is enabled. The data is mirrored to a destination cluster outside of the affected area. The client has scheduled a controlled maintenance window for tomorrow to ensure that dependable operations are maintained.

Which three steps must be taken to accomplish this task? (Choose three.)


43. What are three prerequisites for replicating an Element OS volume to ONTAP? (Choose three.)


44. When volumes are set to be thin-provisioned, what must be monitored for space usage?


45. Which technology uses synchronous replication?


46. You asked a colleague to create a new SnapMirror replication relationship of type “Vault” between two SVMs on separate clusters. You want to verify that the SVMs are healthy and updating on a particular schedule.

What are two ways to accomplish this task? (Choose two.)


47. The customer wants to set up a disaster-recovery relationship between the NetApp SolidFire cluster and the NetApp FAS cluster.

Which two statements are true in this scenario? (Choose two.)


48. Click the Exhibit button.

You have a volume that was configured a year ago using the default Snapshot policy that is shown in the exhibit. You need to increase the number of hourly maximum Snapshot copies to retain only four copies.

Which additional action is needed to keep only four hourly Snapshot copies in this volume after modifying the schedule?


49. A user’s home directory, mounted using NFS, has been encrypted by a ransomware attack. The user asks you to retrieve the data.

In this scenario, which process would allow you to accomplish this task?


50. You have a SolidFire cluster running SolidFire Element Operating System 10.1 and are asked to replicate to an existing ONTAP cluster.

Which ONTAP destination is supported?


NetApp Certified Support Engineer (NCSE) NS0-193 Exam Dumps
NetApp Certified Support Engineer – ONTAP Specialist NS0-591 Exam Dumps

Add a Comment

Your email address will not be published. Required fields are marked *