H31-341_V2.5-ENU Free Dumps (Part 2, Q41-Q60) of V9.02 Are Available: Prepare for Your HCIP-Transmission V2.5 Exam with Confidence

1. The path that a data packet takes in an MPLS network is called a label switching path (LSR). Which of the following descriptions about LSP is wrong?

2. Which of the following does not belong to the optical layer path?

3. Which of the following alarms is transmitted from downstream to upstream?

4. In the fault handling scenario, which of the following descriptions of the basic principles of fault location is wrong?

5. The main difference between an open DWDK system and an integrated DWDM system is whether or not one of the following technologies is used?

6. Which of the following descriptions of the modules on the EMR8 board in the OptiX transDC908 device is wrong?

7. The TOA board is an 8-channel arbitrary rate service tributary processing board. Which of the following descriptions about the TOA (STND) board is wrong?

8. What parameter does the ECC protocol use as the unique identifier of a network element? NCE also uses it as a search keyword when identifying different network elements in the interface and database?

9. The default setting for network elements is automatic extended ECC communication. When the number of Huawei device network elements using extended ECC communication exceeds a certain number, it is recommended to use manual extended ECC communication.

10. If the intermediate leveling method is used, the adjustment target of the single-wavelength optical power at the transmitting and receiving ends is that the flatness of the single-wavelength input optical power is maintained within what range of the nominal single-wavelength input optical power?

11. Which of the following descriptions about the commissioning of the super 100G and 100G mixed transmission system is wrong?

12. In an 80-wave system, using the TMB1 DAP (TN150AC106) amplifier, the total input power is 797 and the typical gain is 19dB. What is the nominal single-wave output optical power?

13. Which of the following descriptions of the functions of MPLSOAM is wrong?

14. In CV/FFD detection, the Ingress node sends detection messages at a certain period. How many times of the sending period does the Egress node use as the detection period to detect the received detection messages and the message content?

15. In the network infrastructure configuration scenario, the network element performance monitoring function needs to be enabled to query performance events. Which of the following statements about setting up the network element performance monitoring function is correct?

16. Which of the following options are not included in the network layer data on the network management side?

17. In the OTN frame structure, which overhead represents the path tracking identifier?

18. In a 10G wavelength division system, the dispersion tolerance of a line board is 1600ps/nm. G.652 optical cable is used to transmit the signal. Considering the influence of dispersion on the system, what is the signal dispersion limited distance?

19. At a certain OLA site, the maximum optical power output of the OAU is 20dBm. It is used in a C-band 80-wave system, but 10 waves are actually opened. There is no spectrum analysis board configured, and the combined signal needs to be adjusted. How many dBm should the output optical power of the UT port of the OAU be adjusted to?

20. Which of the following protections can support the line board scheduling granularity as ODUflex?