Effective DELL EMC D-DP-DS-23 Exam Dumps – Valid Study Materials for Passing Dell Data Protection Design 2023 Exam

1. A customer has decided to connect their IDPA Top-of-Rack (ToR) switch using the 40 GbE QSFP+ uplinks.

If the customer core or distribution switch is a Cisco switch, how should the QSFP+ and cables be ordered?

2. What is the approximate duplication rate for a Dell EMC Avamar server across all clients?

3. Which application is directly integrated with PowerProtect Data Manager?

4. A company is implementing a Dell EMC RecoverPoint solution for several key applications. All application have strict RPO requirements.

Which design factor will affect the RPO of each Consistency Group?

5. A customer wants to perform a data center refresh. They want to standardize their backup infrastructure by using Dell EMC NetWorker and PowerProtect DD in an integrated environment.

The environment consists of:

- A primary data center with NetWorker and PowerProtect DD

- A disaster recovery (DR) data center with only PowerProtect DD

All data is backed up to NetWorker using a DD Boost device. The data is then copied to the DR data center. Data for several critical systems must be retained for seven years on tape at the DR data center. In order to configure and track backup jobs, the entire solution must be managed from a single unified interface.

Which application interface should be used?

6. A customer wants to use 40 GbE breakout uplinks in a Dell EMC Integrated Data Protection Appliance (IDPA) factory-configured ToR switch.

Which customer environment needs to exist to make use of this uplink option?

7. A customer has two new Dell EMC integrated Data Protection Appliances and wants to back up to both applications bidirectional. The data centers are connected by a WAN link that will also be used by other mission critical applications.

To prepare for replication, the customer wants to co-locate both appliances at one data center and configure replication locally minimize the initial replication traffic.

After the initial synchronization, one unit will be relocated and the network reconfigured at the disaster recovery data center, What is mandatory for this solution to be deployed?

8. A customer is using Dell EMC RecoverPoint for VMs with a four vNIC configuration.

Which vRPA network component communicates with VMkernel ports in IP Communication mode?

9. How can the maximum capacity of 96 TB in the Dell EMC PowerProtect DP4400 (24 TB - 96 TB) be fully utilized?

10. In a Dell EMC RecoverPoint for VMs environment, what is the minimum vRPA configuration that supports compression and deduplication?

11. A customer wants to implement PCoIP desktops and Horizon View VDI.

Which Dell EMC Isolated Recovery Solution topology provides the highest level of security for this implementation?

12. In Dell EMC Protection Suite for Applications, which Application Direct agent Oracle 10R2?

13. When designing protection storage using Dell EMC DPS Storage Direct for a VMAX solution, which formula should be used to size the storage capacity?

14. A company plans to use Dell EMC NetWorker to back up their VMware environment using vProxy technology.

Based on best practice, what is the recommended Transport mode?

15. An existing Dell EMC NetWorker customer is interested in replacing their current tape-based infrastructure with Data Domain. At the same time, they want to reduce the network traffic for backups.

What is a consideration when integrating NetWorker with Data Domain?

16. A customer is considering a Dell EMC Avamar backup solution. They want to know whether Avamar can provide the security benefit of data encryption for the data stored on Avamar.

What is an encryption at rest consideration?

17. A solution architect has been asked to review the current Dell EMC NetWorker backup infrastructure of a customer. They are looking for configuration, capacity, and performance information.

Which tool should be used?

18. In Dell EMC Data Protection Suite for Applications, which Application Direct agent supports Oracle 10gR2?

19. A customer is using Dell EMC PowerProtect DP4400 to back up their virtual environment.

What should be recommended if the customer must back up their NAS file servers using the same DP4400?

20. A customer has 6.8 TB of data with multiple backup jobs. The largest backup job is 680 GB, and the existing backup window is over 10 hours which is exceeding the customer backup SLA. The customer has asked you to redesign their current solution with one that enables the backups to complete within an 8-hour window.

When designing the solution, which rate is used to determine the minimum required Dell EMC PowerProtect DD throughput?

21. Which SAP tool can be used to backup an Oracle database to Dell Domain using Application?

22. A customer has an existing Dell EMC Avamar for metadata integration with a Data Domain DD9800 and they recently purchased an IDPA DP8800.

The current Avamar/Data Domain system has many backups that the customer needs to keep for compliance purposes. In addition, the customer wants to migrate the data over to the DP8800 so that they can restore the backups with the DP8800.

What method must be used to achieve this migration?

23. A customer wants to reduce their dependency on tapes but rather leverage their public cloud account for long-term retention. A majority of the applications are still traditionally run on individual physical servers. In addition, they are undergoing a major infrastructure refresh and virtualizing their environment.

However, they want to continue using tapes on only a case-by-case basis.

Which solution should be recommended?

24. A customer is planning to implement a Dell EMC Integrated Data Protection Appliance (JDPA) solution. The customer needs 220 TB of usable capacity Among other backup types. They want to use DDBEA/DD hosts on application hosts for direct backup ability for their DBAs DD Boost backups may generate approximately 35 TB hour at times

Which IDPA model should be recommended?

25. A company plans to integrate a Dell EMC IDPA DP4400 with two 4 port network cards in a Cisco infrastructure.

Which connection type is supported for backup management?

26. A company Protection VM is being protection asynchronously with a Dell EMC RecoverPoint for Vms Consistency Group.

When will this VM receive an acknowledgement that a write a successfully written to storage?

27. A system administrator needs to install an operating system (OS) on a server that is in BIOS mode.

What is the correct sequence of steps to set the server into BIOS mode?

1) Power on the server

2) Enter System BIOS

3) Select the "Boot Settings" option

4) Ensure that the "BIOS" radio button is selected for Boot Mode and click Apply

5) At the prompt select the F2 key to enter the System Setup menu

28. How will Oracle database configuration files such as the control file and spfile be backed up when using Dell EMC Storage Direct Backup?

29. Which Microsoft technologies are used to provide database consistent backups for MS SQL with Dell DPS Application Direct?

30. A customer is performing backups of their desktop/laptop clients to a Dell EMC Avamar server. They plan to add a secure Oracle database server as a new backup client.

However, they are concerned about the security of the database data since no data is being encrypted when it is stored on the Avamar server.

What is a consideration when enabling encryption at rest?

31. What is an advantage of a shared switch topology in a PowerProtect Cyber Recovery Solution?

32. Which factor determines the size of the Journal needed for each Dell EMC RecoverPoint for VMs Consistency Group?

33. As a total data protection solution, which products are included in the Dell EMC Integrated Data Protection Appliance family?

34. A customer wants to deploy Dell EMC Data Domain Virtual Edition on their public cloud to store backups of their cloud VMs. They want to use object storage for creating a Data Domain active tier.

What are the minimum requirements for creating a Data Domain active tier with 48 TB capacity?

35. A customer has finished upgrading an unserved Dell EMC NetWorker server and requires a new license to activate the software.

Which information is required?

36. In a Dell EMC NetWorker environment, what is the maximum number of cloud targets that can be served by a CloudBoost appliance?

37. A system administrator has configured data protection and archive media servers to send data to a Dell EMC PowerProtect DD series appliance over Ethernet.

Which protocol is used to perform the task?

38. A company's environment consists of two Dell EMC Unity arrays and two XtremIO arrays connected to a VPLEX. They have a requirement that will provide synchronous load production for several key applications.

How many RecoverPoint cluster and which license type are required to meet this requirement?

39. You are planning a Dell EMC RecoverPoint solution for a company that has purchased four RPAs for their RecoverPoint cluster.

What information is needed to determine that the Consistency Groups are evenly balanced across the cluster RPAs?

40. A customer has several branch offices with Dell EMC Data Domain integrated with Avamar deployed at all locations. The branch offices have minimal IT staff.

The customer wants to keep a copy of the backups at their central data center which serves as their headquarters with a maximum IT staff. In addition, the customer wants to keep a copy in their public cloud account.

Which recommended solution meets the customer’s requirements?

41. A customer has Dell EMC Avamar, PowerProtect DD series appliance, and Avamar with PowerProtect DD series appliances. They recently added a PowerProtect DP series appliance into the environment.

They are now looking for a way to consolidate their management and backup windows. In addition, the customer is interested in a more unified search for backups, analytics, and reporting.

What should be recommended to the customer?

42. As a total data protection solution, which Dell EMC Integrated Data Protection Appliance models use a Virtual Edition backup server?

43. A customer is currently running VMs in two public cloud providers. As part of their overall data protection strategy, they are interested in adding Dell EMC Cloud Snapshot Manager to their portfolio.

How many subscriptions does the customer need to purchase to protect their VMs in both public cloud accounts?

44. A customer has 6,000 desktops and laptops with 11B of data, an averse backup time of 10 minutes each, and 10 IB of database data the customer wants a solution that addresses the following requirements DEduplication in the shortest backup window with the fewest components Least performance impact on the database servers

Which Dell EMC solution is recommended?

45. What type of backup does Dell EMC Avamar perform for virtual machines?

46. A customer wants to ingest their backups to a Dell EMC Data Domain using Avamar at the maximum network throughput that the system supports.

What should be used to achieve this requirement?

47. Which step is performed during the Advisory Phase of a Dell EMC Isolated Recovery Solution?

48. You have been asked to perform as assessment of a customer's environment. The customer has given complete to their IT staff and environment.

During which stage of the assessment is it first learned about the databases, currently backup software, and growth rates in the environment?

49. Based on which protection plan does Dell EMC Cloud Snapshot Manager use to help take snapshot in an Amazon Web Services cloud environment?

50. Which Dell EMC array allows the use of virtual RecoverPoint Appliances to protect volumes?

51. Which is a sizing consideration when selecting the appropriate Dell EMC PowerProtect DD series model?

52. A company’s Production VM is being protected asynchronously with a Dell EMC RecoverPoint for VMs Consistency Group.

When will this VM receive an acknowledgement that a write is successfully written to storage?

53. Which Dell EMC array will use Snap-based replication when protected with RecoverPoint?

54. Which Dell EMC solution protects and isolates critical data?

55. A customer is using Dell EMC IDPA DP4400 to back up their virtual environment.

If the customer needs to back up their NAS file servers using the same DP4400, what should be recommended?

56. By default, how much can file cache and grow relative to the Dell EMC Avamar client main memory?

57. What is Dell EMC PowerProtect Cloud Snapshot Manager?

58. Which requirement allows the Dell EMC RecoverPoint for VMs vRPAs to communicate with the ESXi servers hosting the Production or Copy VMs?

59. A customer received an alert that their Dell EMC PowerProtect DD appliance has reached 90% capacity. With the weekly increase of new data, they will reach 100% capacity in four weeks.

What is the recommended course of action to avoid disruption of scheduled backup activities?

60. In order to use Dell EMC Data Domain with Data Protection Suite for Applications Storage Direct Backup, which service is required?