New Dell EMC E20-597 Networker Specialty Dumps

1. An EMC NetWorker backup job has failed 95% of the way through its operation.

Which functionality is provided by the checkpoint restart feature?

2. Which three components comprise EMC NetWorker’s three tier architecture?

3. The three primary types of EMC NetWorker hosts form an architecture/topology.

What is this called?

4. Which feature of EMC NetWorker allows multiplexed, heterogeneous data to reside on the same tape?

5. Which EMC NetWorker feature allows for a failed backup to restart at a known good point prior to the backup failure?

6. An administrator in an EMC NetWorker environment wants to know the exact backup creation date and time along with the backup level.

Which EMC NetWorker functionality should be used to find this information?

7. In EMC NetWorker, what best describes the source capacity licensing model?

8. A storage administrator backs up an Exchange server to an EMC Data Domain system. The Data Domain system is configured as an advanced file device. The administrator now wants to create a copy of the backup and send it to tape. The backup job completed at 8pm. The administrator wants the copy to be created at 9pm.

Which option should be used?

9. Refer to the exhibit.

The calendar shows the level backup that was taken on each day.

Which data is sent to the backup server on Friday's backup?

10. Which method would you use to recover a file to its same location when the entry for that file no longer exists in the client file index?

11. The EMC NetWorker software distribution feature is supported on which platform?

12. An EMC NetWorker backup environment consists of a large database server to be backed up. Backups are performed nightly.

Which schedule would you use starting on Sunday to minimize the number of save sets required for recovery on Friday morning?

A)

B)

C)

D)

13. What is a benefit of EMC Networker’s Open Tape Format (OTF)?

14. What is a characteristic of the EMC NetWorker capacity licensing model?

15. What EMC NetWorker software component controls the backup device in an EMC NetWorker Data Zone?

16. A customer has recently purchased a Data Domain appliance to use with EMC NetWorker as the primary storage. The backup administrator needs to configure EMC NetWorker so that multiple backups and recoveries can be performed from a single device at any given time.

What type of device should the backup administrator configure?

17. Which EMC NetWorker host can belong to multiple data zones?

18. How does EMC NetWorker respond to an AFTD disk full condition?

19. Which protocol is used when performing an EMC NetWorker backup to a cloud device ?

20. Which type of device is referred to as a BOOST device?

21. Which directory holds the tracking information for each file backed up by the client "tuba" on EMC NetWorker server "soprano"?

22. Which window in NMC would the EMC NetWorker backup administrator select to configure a new remote storage node?

23. Which backup level requires the fewest number of volumes to restore?

24. How can an EMC NetWorker administrator achieve a recovery of an EMC NetWorker resource database?

25. Which EMC NetWorker daemon provides client files system information?

26. A backup administrator wants to verify that data was successfully written to an AFTD.

Which window in NMC would the administrator select to go gather this information?

27. What is a characteristic of how the EMC NetWorker modules integrate with native applications?

28. Which Microsoft VSS component ensures that the application data is consistent when a shadow copy is created?

29. What is a key feature of the EMC NetWorker Module for Databases and Applications?

30. What components are included with EMC NetWorker Module for Microsoft Applications?

31. Refer to the exhibit.

In the NMM backup workflow, which process is shown in the box marked "A"?

32. Which EMC NetWorker command is replaced when using an EMC NetWorker module?

33. An EMC NetWorker administrator wants to back up Microsoft SQL server using EMC NetWorker Module for SQL.

What needs to be specified in the Backup command field?

34. An EMC NetWorker Administrator wants to perform an online backup of Exchange 2010 that is running on a Windows 2008 Operating System.

Which solution should be used?

35. An EMC NetWorker administrator wants to perform an online backup of Lotus Domino Server running on Windows 2008 Operating System.

Which solution should be used?

36. An EMC NetWorker administrator wants to back up Microsoft Exchange server using EMC NetWorker Module for Microsoft Applications.

What needs to be specified in the Backup command field?

37. An EMC administrator backs up Microsoft Exchange server with EMC NetWorker Module for Microsoft Applications.

What best describes backups in this case?

38. Using EMC NetWorker Module for Microsoft Applications, an EMC NetWorker administrator backs up a Microsoft Exchange server which resides on an EMC CLARiiON disk array.

What best describes supported features in this case?

39. An Administrator needs to back up a Windows file server that has a million small files in a high density file system.

What is the best way to fulfill the Administrator’s requirements?

40. You have successfully backed up three SQL servers with EMC NetWorker Module for SQL.

What needs to be done to recover SQL data?

41. You need to integrate snapshot technology on SAP backups in an EMC NetWorker environment.

Which module is required?

42. What is the first step in the process for information protection using snapshots?

43. An EMC NetWorker Administrator needs to be able to back up and recover a high density active file system to the backup devices connected to local or remote storage nodes.

44. A site is using EMC NetWorker with EMC NetWorker Module for Databases and Applications for backups.

The administrator wants to eliminate redundant backup data to significantly reduce backup storage requirements.

Which component would you recommend adding to the backup environment?

45. What is a characteristic of the EMC NetWorker SnapImage module?

46. An EMC NetWorker administrator has two Microsoft Exchange servers and one Microsoft SharePoint distributed farm that reside on an EMC CLARiiON disk array.

The backup administrator has the following two recovery requirements:

(1) The ability to recover both Exchange and SharePoint data by leveraging Microsoft VSS framework.

(2) The ability to roll back an entire volume to a previous point-in-time.

What is a recommended recovery solution?

47. An EMC NetWorker administrator has two Microsoft Exchange servers and one Microsoft SharePoint distributed farm. These reside on an EMC CLARiiON disk array.

The backup administrator has two backup requirements:

(1) Back up both Exchange and SharePoint servers by leveraging Microsoft VSS framework.

(2) Minimize the performance impact caused by backup operation.

What is a recommended backup solution?

48. You have been asked to implement a EMC NetWorker backup solution with the following requirements:

(1) Leverage Microsoft SQL VDI (Virtual Device Interface) backup API.

(2) Be able to back up SQL database, transaction logs and filegroups.

What is a recommended EMC NetWorker add-on module?

49. A EMC NetWorker administrator needs to provide customizable backup reporting, alerting, monitoring, and correlation analysis capabilities across an entire backup environment.

Which EMC application should the backup administrator use?

50. You have been asked to implement an EMC NetWorker backup solution with the following two requirements:

Be able to back up Microsoft Exchange, SharePoint and Hyper-V servers.

Be able to recover Microsoft application data from a persistent snapshot.

What is a recommended EMC NetWorker add-on module?

51. When backing up a Lotus Domino database with EMC NetWorker Module for Databases and Applications, how is the Lotus Domino backup level determined?

52. When backing up an Oracle database with EMC NetWorker Module for Databases and Applications, how is the Oracle backup level determined?

53. A backup administrator uses the EMC NetWorker Module for Microsoft Applications. The administrator wants faster recovery of data directly from snapshots on disk for their Microsoft Exchange implementation.

Which technology is used by NMM to perform backups and recovery?

54. What is integrated with NMDA to provide snapshot-based protection for DB2?

55. In an EMC NetWorker environment with a single datazone, which EMC NetWorker software component would you install on hosts that manage backup devices?

56. When the EMC NetWorker management console server and the EMC NetWorker server are installed on different hosts, what is required to administer EMC NetWorker server from the EMC NetWorker management console server?

57. What is the default TCP/IP port used by EMC NetWorker Management Console database process?

58. An EMC NetWorker administrator wants to move NMC from the server where it is currently installed to a new Windows system. The NMC reporting feature is being used.

What must be installed on the new system, in addition to the Console server software?

59. When connecting to an EMC NetWorker console server from a different host, an error message indicates that a supported version of Java Runtime Environment (JRE) is not installed. You verify that the supported JRE version is already installed on the EMC NetWorker console server.

However, the error message remains.

What needs to be done to resolve the problem?

60. An EMC NetWorker Administrator wants to start all of the EMC NetWorker processes on a Solaris server.

Which command would run?

61. Your Windows environment consists of several EMC NetWorker servers on the same subnet that is responsible for backing up only specific clients for security reasons. You need to change one backup client’s NetWorker server to allow it to be backed up by both NWServer-A and NWServer-B.

Which file do you need to change in order to meet this requirement?

62. What is a function of the nsrwatch program?

63. What is the command to manually start the EMC NetWorker processes on a Solaris server?

64. What is the command line alternative to perform a query and generate a report similar to the reports generated within the EMC NetWorker Management Console (NMC)?

65. In EMC NetWorker, what enables users to browse their backups for files from a particular point-in-time?

66. Which daemon supports remote execution requests for backup requested by EMC NetWorker Management Console?

67. Which daemon is responsible for organizing backup data before it is written to the backup media?

68. Refer to the exhibit.

How many nsrmmd processes are running on each remote storage node?

69. Refer to the exhibit.

How many nsrlcpd processes are running on the EMC NetWorker server?

70. What is an EMC NetWorker host ID called in a clustered EMC NetWorker server?

71. An EMC NetWorker administrator wants to determine the RPC port range for a host.

Which directory contains this information?

72. You are deleting save sets manually from the EMC NetWorker server using CLI commands. You receive an error that the database update has failed.

Which process should you verify is running on the EMC NetWorker server?

73. Which tool is available to help determine and track source capacity usage in an EMC NetWorker environment?

74. A company is running an EMC NetWorker server on a UNIX platform and wants to monitor backup operations from the UNIX command line.

Which utility can be used?

75. On an EMC NetWorker Client, which command can be used to backup local data?

76. What is the first step that occurs during a client initiated backup?

77. An Administrator has deployed the EMC NetWorker server software with clustering. There are 50 clients and an autochanger with 4 drives controlled by a remote storage node.

What is the path of the backup data from the client to the media?

78. By default, the EMC NetWorker bootstrap reports are generated and sent automatically to the backup administrator.

Which configuration change is required to redirect the reports to the printer?

79. You are logged in to your Windows-based EMC NetWorker server and are attempting to manually run a backup group on the EMC NetWorker Management Console. You are receiving an error when attempting to manually start the group What is the most likely reason for the error?

80. You are backing up a group of clients that have varying schedules. Using the EMC NetWorker Administration interface, you need to perform a full backup of all clients in that group.

How would you ensure that a full backup is performed for a client when it is backed up during the next save group execution?

81. A user on the EMC NetWorker client wants to initiate a backup of selected files. At a minimum, which components must be configured before the backup can succeed?

82. An EMC NetWorker administrator notices that clients are being backed up one at a time, even though they are scheduled to start simultaneously.

What may be a cause of this?

83. An EMC NetWorker administrator wants to perform backup of an application server only if a certain number of transaction logs have been reached.

What type of backup needs to be performed?

84. After installing EMC NetWorker server software, which resource needs to be created, at a minimum, before performing a backup?

85. After initiating a manual save, you receive the following error message:

- 39078

- Save

- SYSTEM error: manual saves are not enabled

What must you check to do a manual save?

86. An EMC NetWorker server has two user defined pools, Pool A and Pool B. Pool A has its "Clients" attribute set to "Client A" while the other attributes are unset. Pool B has its "Groups" attribute set to "sales" and "Levels" attribute set to "full" and other attributes unset.

If a save set is generated from Client A from the "sales" group using a full level backup, which pool will the data be sent to?

87. An EMC NetWorker server has been configured to stage an adv_file type device upon reaching a high water mark of 80%. After the staging begins, what rule determines when the staging process ends?

88. Which option for cloud backup devices allows limiting the bandwidth that EMC NetWorker consumes for cloud operations during specified periods of time?

89. In an EMC NetWorker environment, which two ports will nsrexecd always try to listen on?

90. Consider the EMC NetWorker directive:

<< / >>

+compressasm: .

<< /export/home >>

forget

ignore

What is the result of this directive?

91. An EMC NetWorker administrator wants to prevent tapes from staying mounted after backups complete.

Which parameter must be set?

92. On a given EMC NetWorker host, what does the server’s file define?

93. If a Level 5 backup is performed for an EMC NetWorker client, at what level is its Client File Index backed up?

94. If an incremental backup is performed for an EMC NetWorker client, at which level is its Client File Index backed up?

95. What is a characteristic of EMC NetWorker volume cloning?

96. ClientA is a client in an EMC NetWorker environment. There are two EMC NetWorker servers, ServerA and ServerB. There is also one storage node, StorageNodeA. You noticed that there are no entries in the / nsr/res/servers file on ClientA.

Which system(s) is(are) allowed to back up data from ClientA?

97. What is the EMC NetWorker nsraddadmin command used for?

98. What command option can be used to test connectivity and simulate the backup on an EMC NetWorker client without backing up the data?

99. Which EMC NetWorker process manages the media database?