Latest Citrix 1Y0-241 Dumps [2023] To Pass 1Y0-241 Exam Successfully

To pass 1Y0-241 Deploy and Manage Citrix ADC with Traffic Management exam successfully, you must have the latest Citrix 1Y0-241 dumps of DumpsBase, which will supply you with user-friendly pdf and software to practice a range of questions, and you will gain confidence in your ability to achieve outstanding scores in your final 1Y0-241 Deploy and Manage Citrix ADC with Traffic Management Exam. DumpsBase guarantees a 100 percent satisfying outcome for anybody who prepares Citrix Certified Associate exam with Citrix 1Y0-241 dumps. 

Try to read Citrix CCA-AppDS 1Y0-241 Dumps Free Demo First

1. Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?

2. In an SSL offload deployment, which policy will allow a Citrix Administrator to modify all URLs in the response body from "http://" to "https://"?

3. Scenario: To receive data alerts for failures, a Citrix Administrator is configuring SNMP on the Citrix ADC. The administrator is confident that the manager, alarms and SNMP traps are configured correctly. The following week, there is a Citrix ADC-related outage and the administrator does NOT receive any alerts.

What could be the reason for this alert failure?

4. A Citrix Administrator needs to use a client’s IP address as the source IP address for Citrix ADC-to-server connections.

Which Citrix ADC mode can the administrator use to meet this requirement?

5. Scenario: A Citrix Administrator currently manages a Citrix ADC environment for a growing retail company that may soon double its business volume. A Citrix ADC MPX 5901 is currently handling web and SSL transactions, but is close to full capacity. Due to the forecasted growth, the administrator needs to find a cost-effective solution.

What cost-effective recommendation can the administrator provide to management to handle the growth?

6. Scenario: The primary content switching vServer has gone down.

To troubleshoot, a Citrix Administrator has issued the following command:

> show csvserver CSV

CSV (10.1.100.100:443) C HTTPS Type: CONTENT

State: UP

Last state change was at Mon Jun 29 15:20:43 2020

Time since last state change: 1 day, 06:47:58 610

Client Idle Timeout: 180 sec

Down state flush: ENABLED

Disable Primary vServer On Down: DISABLED

Appflow logging: ENABLED

Port Rewrite: DISABLED

State Update: DISABLED

Default: Content Precedence: URL

vServer IP and Port insertion: OFF

Persistence: NONE redirect: http://www.site1.com/mysite1/maintenance

Backup: vServerCLBC2

Listen Policy: NONE

IcmpResponse: PASSIVE

RHIstate: PASSIVE

Traffic Domain: 0

Based on this output, where will the subsequent request be redirected?

7. A Citrix Administrator wants to configure independent and isolated access on a single appliance to allow three different departments to manage and isolate their own applications.

What can the administrator configure to isolate department-level administration?

8. set gslb vServer-GSLB-1-MIR ENABLED

What will the Citrix ADC appliance send when the above command is executed?

9. Which mode on a Citrix ADC can a Citrix Administrator utilize to avoid asymmetrical packet flows and multiple route/ARP lookups?

10. Scenario: A Citrix Administrator executed the following command in a global server load balancing (GSLB) environment:

set gslb site SiteB CtriggerMonitor MEPDOWN

What will be the effect of this command on the default service monitoring behavior on a remote site?

11. Which four authentication types can a Citrix Administrator use for Citrix ADC authentication, authorization, and auditing (AAA) multifactor authentication? (Choose four.)

12. Scenario: A Citrix Administrator is managing a Citrix Gateway with a standard Platform license and remote employees in the environment. The administrator wants to increase access by 3,000 users through the Citrix Gateway using VPN access.

Which license should the administrator recommend purchasing?

13. Which log records detailed information such as statistics, metrics, and debug information in a proprietary binary format on the Citrix ADC?

14. Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.

The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.

Why has the Citrix ADC lost the newly added configurations?

15. A Citrix Administrator notices that the Citrix ADC is sending the IP addresses of all the active services in the DNS response.

The administrator can use the set gslb vServer<name> __________________ parameter to change this behavior.

16. Scenario: A Citrix Administrator configures an Access Control List (ACL) to block traffic from the IP address 10.102.29.5: add simpleacl rule1 DENY -srcIP 10.102 29.5

A week later the administrator discovers that the ACL is no longer present on the Citrix ADC.

What could be the reason for this?

17. Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load

balancing is set up in round-robin mode.

The current load-balancing setup on the Citrix ADC is:

✑ One load-balancing vServer with one externally accessible VIP

✑ One service created for each protocol type

✑ One server entity for each backend resource

During business hours, the administrator wants to make changes to one backend server without affecting the other servers.

What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?

18. Scenario: A Citrix Administrator needs to configure a Responder policy, so that the string “/mytraining” is added to every URL path received.

The administrator should use these commands to accomplish this:

>add responder action Redirect_Act redirect “HTTP.REQ.URL.PATH_AND_QUERY+”mytraining”” C responseStatusCode 302

>add responder policy Redirect_Pol___________Redirect_Act

>bind lb vServer lb_vsrv_www CpolicyName Redirect_Pol Cpriority 100 CgotoPriorityExpression END C type_______

(Choose the correct option to complete the set of commands.)

19. Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is ‘Unknown’.

What is causing the secondary state to be ‘Unknown’?

20. Scenario:

POLICY 1:

add rewrite action ACT_1 corrupt_http_header Accept-Encoding

add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1

POLICY 2:

add rewrite action ACT_2 insert_http_header Accept-Encoding “”identity””

add rewrite policy POL_2 “HTTP.REQ.IS_VALID “ ACT_2

How can a Citrix Administrator successfully bind the above rewrite policies to the load-

balancing vServer

lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?

21. Scenario: A Citrix Administrator is configuring load balancing on a Citrix ADC appliance for company web servers. The administrator needs to create a custom monitor that will look for a specific keyword response from the website, which will be used to keep services in an UP state.

Which monitor can the administrator create to meet this requirement?

22. Scenario: A Citrix Administrator configured a Citrix ADC active-passive, high availability (HA) pair. The HA pair failed over and customers were unable to access hosted websites. The administrator troubleshoots and discovers that the upstream router is NOT updating its ARP table.

What can the administrator configure to resolve this issue?

23. Scenario: A Citrix Administrator is concerned about the number of health checks the Citrix ADC is sending to backend resources. The administrator wants to find a way to remove health checks from specific bound services.

How can the administrator accomplish this?

24. Scenario: A Citrix Administrator executed the command below:

> set httpcallout httpcallout1 CcacheForSecs 120

This command changes the cache duration of the HTTP ____________ to be set to 120 seconds. (Choose the correct option to complete the sentence.)

25. A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.

Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?

26. Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually C accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed.

To achieve these requirements, which parameter can the administrator configure while disabling the service?

27. To improve page-rendering time a Citrix Administrator needs to overcome the connection limitation by enabling client browsers to simultaneously download more resources.

What should the administrator enable while configuring the front end optimization (FEO) feature?

28. Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:

> bind vlan 10 Cifnum 1/1

What is the result of executing this command on the Citrix ADC?

29. Scenario: A Citrix Administrator installed the compression feature on the web servers. To offload the compression on the Citrix ADC, the administrator configured the Citrix ADC appliance to remove the ‘Accept Encoding’ header from all HTTP client requests. However, the administrator observes that data is NOT being compressed by the Citrix ADC, even though the ‘Accept Encoding’ header is being removed from all requests.

What could be the cause of this issue?

30. Scenario: A Citrix Administrator configured a responder policy as follows:

> add responder action Picture10Action redirect ""http://" + http.req.hostname + http.req.url + "/picture10.html"" -bypassSafetyCheck YES

> add responder policy Picture10Policy "http.req.url.eq("/mywebsite")" Picture10Action

> bind responder global Picture10Policy 1 END -type OVERRIDE

What will be the effect of this configuration?

31. Scenario: A Citrix Administrator created and bound multiple content switching policies. During testing, attempts to access https://cs.mycompany.com resulted in the error message below:

HTTP 503 Service Unavailable

In a Citrix ADC configuration, what can the administrator do to fix the error?

32. What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?

33. A Citrix Administrator needs to block all DNS requests from subnet 10.107.149.0/24.

Which expressions can the administrator use to match the required traffic?

34. A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?

What could be causing this?

35. Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator notices several entity UP and entity DOWN messages.

To what are these messages related?

36. To protect an environment against Hash DoS attacks, which two configurations can a Citrix Administrator use to block all post requests that are larger than 10,000 bytes? (Choose two.)

37. Users are experiencing resets from the intranet server website, which is load balanced through the Citrix ADC.

Which Citrix ADC tool can a Citrix Administrator use to troubleshoot the reset issue?

38. Scenario: While using the GUI, a Citrix ADC MPX appliance becomes unresponsive. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.

What can the administrator do to accomplish this?

39. Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.

What can the administrator do to increase bandwidth on the Citrix ADC?

40. Scenario: A Citrix Administrator executed the command below in an active-active, global server load balancing (GSLB) setup.

set gslb parameter CldnsprobeOrder DNS PING TCP

The order to calculate the _____ for dynamic proximity will be the DNS UDP query followed by the ping and then TCP. (Choose the correct option to complete the sentence.)

41. Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that networking issues may be causing the failure.

What could be the cause of this issue?

42. Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default loadbalancing method to one that will help distribute the load more evenly.

Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?

43. Scenario: A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair. The administrator needs to ensure that one Citrix ADC is UP and primary at all times to guarantee that business websites are always available.

In the event that both nodes become unavailable or fail a health check, what does the administrator need to do to ensure that the Citrix ADCs still handle web traffic?

44. A Citrix Administrator needs to bind a URL transformation policy.

Which three bind points could the administrator use? (Choose three.)


 

Latest Citrix 1Y0-241 Exam Dumps (2024 V10.02) - Increase Your Chances of Passing the 1Y0-241 Exam
Updated Citrix CCE-AppDS 1Y0-440 Dumps V9.02 - Pass Architecting a Citrix Networking Solution Exam Smoothly

Add a Comment

Your email address will not be published. Required fields are marked *