350-101 Dumps (V8.02) 2026 for CCNP Wireless WLCOR Exam Preparation: The Latest 350-101 Exam Questions to Support Your Certification Journey

Cisco CCNP Wireless is back, the 350-101 Implementing and Operating Cisco Wireless Core Technologies (WLCOR) v1.0 is the core exam to prove your specialized knowledge and practical understanding of complex Cisco wireless solutions, architectures, and automated lifecycle management. To give you a focused and efficient way to prepare, DumpsBase provides the newest 350-101 dumps (V8.02) with 103 latest questions and verified answers to support your CCNP Wireless certification journey. All these questions and answers are organized to match the latest exam preparation needs, making it easier for both new learners and experienced networking professionals to review important knowledge areas. By practicing with updated 350-101 exam questions, you can identify weak points, strengthen your understanding, and become more familiar with the exam format before test day. Trust, DumpsBase 350-101 dumps (V8.02) are created to help you prepare more effectively for the Implementing and Operating Cisco Wireless Core Technologies (WLCOR) v1.0 exam.

Check Cisco 350-101 free dumps first before downloading our full version of V8.02:

1. Which Cisco technology leverages machine learning methods and a cloud learning platform that helps to identify critical issues?

Catalyst Center Assurance

Network Services

Catalyst Center LLM Insights

AI Network Analytics

2. Which solution enables a seamless user experience when roaming in a wireless network?

static VLAN policy

optimized roaming

redundant RF profile

fast transition

3. What is the main benefit of using AI Enhanced RRM on the Cisco Catalyst 9800 wireless controller?

It is an automatic tuning tool that is used to adjust RF parameters based on static thresholds.

It focuses on increasing the transmit power of access points to maximize coverage regardless of interference.

It disables dynamic channel assignment and power control to maintain a fixed wireless environment for stability.

It uses machine learning and cloud analytics to proactively optimize RF parameters.

4. Which process is managed by Ministry of Internal Affairs and Communications in Japan?

RF technical standards

manufacturing batch inspection

customer onboarding documentation

supplier chain evaluation

5. Refer to the exhibit.





A WLC is deployed at a branch location to facilitate secure client connectivity. A network engineer configures one WLAN using WPA2 Personal passphrase and activates ASCII format key to align with company security policies.

Which configuration enables client authentication for this WLAN?

no security wpa akm dot1x

client dhcp-proxy enable

security wpa wpa2 ciphers aes

security wpa akm psk set-key ascii 0

6. Refer to the exhibit.





A Cisco 9800 WLC is deployed at a branch location to facilitate secure client connectivity. A network engineer configures a WLAN using WPA2 Enterprise authentication and activates the RADIUS server-based method to align with company security policies.

Which CLI command must be added to the box in the configuration to enable client authentication for this WLAN?

security dot1x RADIUS_AUTH_LIST CompanyWLAN1

security authentication dot1x RADIUS_AUTH_LIST

security authentication CompanyWLAN1 RADIUS_AUTH_LIST

security dot1x authentication-list RADIUS_AUTH_LIST

7. Refer to the exhibit.





The Catalyst 9800 WLC logs show when a client with MAC address 9C:4E:36:8A:2B:F1 fails to connect to a WLAN configured for Wi-Fi Protected Access 3-Enterprise with 802.1X.

Which action must the engineer take to resolve the issue?

Ensure that the AP is using the appropriate credentials.

Change the WLAN to Wi-Fi Protected Access 2-Personal and configure a preshared key.

Verify the client's Active Directory credentials and ensure that the RADIUS server is reachable.

Disable RADIUS NAC on the policy profile assigned to the WLA

8. Users report slowness on the network, and it is suspected that certain applications are consuming all the bandwidth. A network engineer must enable the NBAR protocol to improve wireless client traffic visibility and provide advanced, granular, application classification, and analytics.

How should the network engineer configure NBAR on a 9800 WLC?

Enable NBARv2 on the WLA

Enable deep packet inspection on the WLA

Configure packet inspection on the policy profile.

Configure AVC on the policy profile.

9. Which feature does a high-gain patch antenna impart to a wireless signal?

single narrow frequency use

partial overlap of frequency bands

focused beam in a flat area

alternating direction with elevation

10. An engineer has been tasked with configuring a Cisco Catalyst 9100 AP to join a WLC using a static configuration as DHCP and DNS discovery methods are not available. The engineer has set the AP hostname to ‘AP053540555’, and has configured the AP with a static IP address, subnet mask, and default gateway. The engineer must now configure the AP to discover the primary WLC with hostname ‘WLC-PRIMARY’ and IP address ‘192.168.100.10’.

Which CLI command must the engineer use on the AP?

capwap ap WLC-PRIMARY 192.168.100.10

ap primary-base WLC-PRIMARY capwap 192.168.100.10

capwap ap primary-base 192.168.100.10

capwap ap primary-base WLC-PRIMARY 192.168.100.10

11. Refer to the exhibit.





A network administrator is working on a WLC to enable user access for contractor desktops using WPA2-Enterprise using EAP-TTLS. The administrator verified the external authentication configuration and now must test network connectivity.

Which code snippet must be added to the box in the code to complete the configuration on the WLC that supports authentication with an external server?

aaa group server radius RADIUS-GRP

aaa group server aaa RADIUS-GRP

aaa server group server radius RADIUS-GRP

aaa server group server radius RADIUS-GRP

12. Refer to the exhibit.





A network administrator is working on a WLC to enable user access for employee tablets using PEAP-MSCHAPv2 with a RADIUS backend. The administrator verifies the external authentication configuration and plans to test network connectivity.

Which code snippet must be added to the configuration for the WLC to support authentication with an external server?

radius server external-radius

external-radius RADIUS-GRP

radius server RADIUS-GRP

external-radius aaa server

13. Refer to the exhibit. A retail business is deploying guest wireless across its remote branch locations. Each branch uses FlexConnect APs in local switching mode, and the central wireless LAN controller is configured with an ACL named CWA_REDIRECT. Cisco ISE is configured to return this ACL during the authentication process for central web authentication (CWA). However, when clients attempt to connect to the guest wireless LAN, they are added to the exclusion list.

Which configuration step resolves the connectivity issue?

Include the ACL CWA_REDIRECT in the AP-Join profile.

Change the ACL to include the ISE IP address.

Map the ACL CWA_REDIRECT to the flex profile as a policy AC

Add the ACL CWA_REDIRECT to the policy profile.

14. Refer to the exhibit.





An engineer must configure wireless guest networking for a deployment at site A, which requires support for guest VLAN assignment and assignment for wlan guest-network 20. The controller will provide network segregation and restrict access to internal resources. Based on the configuration commands, which action meets the requirements?

Establish a mesh bridge connection for the guest VLAN and assign logical interface for isolation.

Create a policy profile for the guest VLAN and a policy tag to map the WLAN to the policy profile.

Assign a policy tag to map the to WLAN and assign a physical interface for isolation.

Implement the Spanning Tree Protocol and assign an AP group name.

15. Which feature does bridge mode provide in a Cisco wireless mesh architecture?

It enables point-to-point communication between network segments.

It switches all traffic passing through the AP to 2.4 GHz by default.

It adjusts RF transmit power on any neighbor nodes.

It communicates with WAN edge by default.

16. What is a benefit of network adaptability in terms of improved operational outcomes when using AI-RRM in Cisco Catalyst Center?

provisioning of static device addresses

reduction of co-channel interference

transmission of regular software update schedules

categorization of users by authentication type

17. A network engineer must isolate all guest users connected to the WLAN on a Cisco 9800 WLC so they cannot communicate with each other but can access the internet.

The WLAN must meet these requirements:

• SSID named VisitorAccess assigned to VLAN 30

• guests prohibited from sharing files with other guests

• must be scalable to multiple access points in the building

Which action must the network engineer take to meet the requirements?

Enable P2P blocking in the policy profile and map the WLAN to a dedicated guest VLA

Set up local authentication and map the WLAN to a dedicated guest VLA

Set up a FlexConnect group and use local switching for the guest WLAN internet access.

Enable multicast mode and associate a RADIUS server with the guest WLA

18. Which benefit does enabling SNMP monitoring provide for Cisco wireless device management?

hardware-only performance metrics

manual log review for each branch

fragmented statistics across controllers

alerts on access point status

19. A wireless engineer is rolling out a group of new Meraki APs across multiple office floors. The APs must be centrally managed through the Meraki dashboard and be set up for automatic cloud registration. Network connectivity has been established, and the company firewall follows standard security policies. To minimize manual configuration for each AP the engineer must configure them to automatically discover the dashboard.

Which action must the engineer take?

Set up a site-to-site VPN between the switch on each floor and the data center.

Assign a static management IP to each AP using the local status page.

Register the AP serial numbers in the lease table of the DHCP server.

Connect APs to a network with internet and allow outbound access to Meraki cloud.

20. How does MIMO operate during wireless transmission?

It uses multiple radio paths to increase throughput and reliability.

It applies frequency hopping to prevent crosstalk.

It shares a single connection among endpoints for coverage expansion.

It limits data paths to a single antenna for error reduction.

21. What defines device sensitivity in a wireless environment?

capability to process the signal

detection of redundant gateways

synchronization of beacon intervals

implementation of key refresh schedules

22. Refer to the exhibit.





A startup company has recently moved to new offices and performed a full network refresh. The application development team requested a high-speed reliable wireless network to use for testing real-time applications. Although, the wireless network is Wi-Fi 7 enabled, the wireless clients are connecting using lower speeds.

Which configuration must be applied on the WLC to increase throughput?

security wpa3 akm sae ext-key

security wpa wpa2 wpa3 aes512

security wpa wpa2 wpa3 tkip512

security wpa wpa2 ciphers gcmp256

23. A school district is deploying Cisco Catalyst 9176 APs to remote sites with occasional WAN outages. The IT team wants the APs to attempt joining a secondary or tertiary Catalyst 9800 WLC if the primary controller is unreachable. The team must preconfigure all controller IP addresses using the AP CLI before deploying.

Which set of CLI commands sets the primary, secondary, and tertiary controller IP addresses on a Catalyst 9176 AP?

set controller primary-base main-wlc 10.10.10.10 set controller secondary-base backup 10.10.10.20 set controller tertiary-base tertiary-wlc 10.10.10.30

capwap ap primary-base main-wlc 10.10.10.10 capwap ap secondary-base backup-wlc 10.10.10.20 capwap ap tertiary-base tertiary-wlc 10.10.10.30

ap join primary 10.10.10.10 ap join secondary 10.10.10.20 ap join tertiary 10.10.10.30

capwap ap wlc primary 10.10.10.10 capwap ap wlc secondary 10.10.10.20 capwap ap wlc tertiary 10.10.10.30

24. Refer to the exhibit.





An enterprise is deploying Cisco Catalyst 9800 WLCs and is using Catalyst Center as the management platform to oversee wireless access policies. To meet the organization's compliance requirements, all wireless endpoints must be evaluated with security posture validation before gaining access.

Which set of CLI commands must be added to the box in the code to complete the configuration?

aaa-override nac-policy

wireless profile policy my-policy aaa-override

aaa-override nac

wireless profile policy aaa-override

25. How does the optimized roaming function operate in a WLC implementation?

It disassociates clients when the RSSI is lower than the set threshold.

It is integrated with external services for client wireless experience.

Device locations are determined through peer-to-peer beacons.

Load balancing is statically defined for all locations.

26. An organization must manage ongoing firmware updates for redundant controllers in the network. They will use Cisco Catalyst Center for deployment and visibility. The current environment uses centralized and distributed management approaches. Automation and reporting are critical to minimize operational workload.

Which method must be used to manage structured update processes and monitor progress throughout the update cycle?

inventory snapshots from hardware report

software templates

software image management workflows

lifecycle workflow

27. What is the primary modulation technology used by 802.11ax in wireless communications?

frequency hopping spread spectrum

direct sequence spread spectrum

orthogonal frequency-division multiple access

Quadrature Amplitude Modulation OFDMA

28. Which hierarchy in a YANG data modeling approach describes a relationship in the context of NETCONF device configuration?

object and attribute model

child and parent structure

hub and spoke model

tree and leaf-based structure

29. A hotel wants to provide guests with wireless connectivity via a captive portal using a Cisco 9800 WLC.

The solution must meet these requirements:

• Ensure that guests are redirected to a custom web page for login and after authentication must have only internet access.

• The guest SSID must not require a password and must be visible to all clients.

• Network segmentation between staff and guests is required at the VLAN level.

What must the IT team configure on the WLAN?

central web authentication with WPA2-PSK security and a DNS ACL assigned to the WLAN profile

open authentication with a local web server for the guest WLAN

PSK WLAN with VLAN override and enable mDNS for guest users

central web authentication and assign a policy with ACLs restricting access to internal networks

30. Refer to the exhibit.





An organization wants to use Cisco Spaces for location analytics, and an engineer is setting up the Cisco Catalyst 9800 WLC to send location data. The Spaces connector has already been configured and is operational on the WLC. The engineer must now configure the controller to forward telemetry data to the correct Spaces cloud endpoint using TLS to complete the integration.

Which CLI command must be added to the box in the code?

profile spaces-profile ip address 198.51.100.10 receiver tls-native

receiver protocol tls-native profile spaces-profile ip address 198.51.100.10 57555

receiver ip address 198.51.100.10 57555 protocol tls-native profile spaces-profile

profile spaces-profile receiver 198.51.100.10 57555 protocol tls-native

31. What is a benefit of applying TACACS authentication for device access?

static user grouping without role differentiation

fragmented statistics across controllers and devices

streamlined administrator access across platforms

single user for device and network access

32. What is a feature of an RTS frame in the context of 802.11 frame types?

It applies spectral mask for transmission.

It requests permission to send data on a channel.

It provides navigation updates for roaming clients.

It compresses frames for bandwidth savings.

33. A network engineer must ensure that guest users connecting to a Cisco 9800 WLC are assigned IP addresses from a specific subnet that is separate from corporate users. The guest network must support at least 200 simultaneous connections and isolate traffic from internal devices. The DHCP server must allocate addresses only within the 10.20.30.0/24 subnet.

Which action must the network engineer take to accomplish this task?

Set up a unique policy tag on the guest WLAN and use a shared DHCP pool.

Create a dedicated guest interface and map it to the guest policy profile for the guest WLA

Assign a unique policy tag to the guest WLAN and use a shared DHCP pool with DHCP option 43.

Use static IP address assignment for the guest WLAN interface and use ACLs for separation.

34. Which wireless connection occurs when there are no physical obstacles between the receiver and transmitter?

attenuation

line-of-sight

reflection

beamforming

35. Refer to the exhibit.





An engineer is setting up a new WLC in a branch office. The IT security policy states that all management access must use encrypted protocols, administrators will connect remotely, and network scans will be run to check for any noncompliant management protocol exposure.

Which action must the engineer take to achieve the required management access policy?

Permit only HTTP, Telnet, and SSH across all VLANs for 10.10.1.0/24.

Enable Telnet, SSH, and HTTPS across the management and guest interfaces.

Permit console access for 10.10.1.0/24 only with HTTP disabled.

Enable HTTPS and SSH, and disable HTTP and Telnet on the WL

36. Refer to the exhibit.





A wireless controller is deployed at a branch location to facilitate guest client connectivity. A network engineer configures one WLAN using Web authentication and activates web-based method to align with company security policies.

Which configuration enables client authentication for this WLAN?

security web-auth

wlan webauth 2 webauth

no security wpa wpa2

no security wpa akm dot1x

37. Refer to the exhibit.





A network engineer must create a PSK WLAN that will be anchored to the DMZ. After this WLAN is created, users cannot connect to it.

Based on the output from the RA trace, which action must the engineer take to resolve the issue?

Disable fast transition 802.11r on the WLA

Configure matching passwords on the client and the WLA

Remove the anchor WLC from the mobility group.

Configure matching WLANs on the foreign and the anchor.

38. A wireless administrator must configure detailed and comprehensive monitoring for client devices across branch locations. The team wants to streamline operations for faster response during performance degradation. To support the organization's growth, the administrator needs a centralized reporting platform that displays aggregated data.

Which solution must the administrator use to monitor the clients in the network?

Implement central syslog server.

Use Cisco Catalyst Center Assurance.

Run show logging on WLC CL

Use the WLC dashboard.

39. What does an elevated noise floor indicate in an RF environment?

decreased link reliability

stable time synchronization

enhanced spectrum allocation

minimized bandwidth demand

40. Refer to the exhibit.





An engineer is preparing a Cisco 9800-L WLC for deployment in a sensitive area. Only encrypted remote management via SSH is allowed, and all other VTY access methods must be disabled. The 9800-L WLC will be part of a larger deployment, and an external audit will check for any unencrypted management protocols. According to the requirements, only SSH is allowed for remote CLI sessions.

Which set of commands must be executed to complete the Cisco IOS XE CLI configuration on the WLC?

line vty 0 97 no transport input telnet login authentication default

line vty disable 0 97 transport preferred ssh login authentication default exit

line vty 0 97 transport input ssh login authentication default exit

line vty 0 97 transport ssh login authentication default

 Loading...