300-120 WLSI CCNP Wireless Prep with the Latest Dumps V8.02 – Learn Free Demo Questions (Part 1, Q1-Q40) First

Cisco CCNP Wireless certification dates back to 2026, and the Implementing Cisco Wireless Advanced Solutions (WLSI) 300-120 exam is a concentration exam that evaluates your knowledge of wireless network implementation. To prepare for your 300-120 exam efficiently, download the latest dumps from DumpsBase to practice the authentic exam questions and answers. The current version of 300-120 dumps is V8.02, offering 594 practice questions and answers to help you prepare for the WLSI exam with confidence. All these Q&As are designed to align with the Implementing Cisco Wireless Advanced Solutions exam objectives. Using 300-120 dumps (V8.02) helps you cover these topics effectively without feeling lost. Each question introduces a specific configuration or architecture situation, making it easier to break down complicated subjects into smaller pieces. Trust, this method allows you to zero in on one area at a time while still keeping a big-picture view of the syllabus. And today we will share free demo questions with you. Then you can find that we provide a structured way to review and test your understanding, making preparation more efficient.

Check 300-120 free dumps – Below are the free demo questions (Part 1, Q1-Q40):

1. What aWIPS-related alarm parameters can be configured in Cisco Prime Infrastructure?

Location

Auto-Immune

Blacklist

Forensic

Containment

Call home

2. What WLAN QoS category is usually mapped to DSCP 34 (AF41)?

Voice

Best Effort

Video

Background

3. Which of the following are CMX Analytics widgets?

Device Count

Path

Hyperlocation

Dwell Time

Locate and Detect

Correlation

4. When using AutoQoS Guest templates on Cisco IOS-XE wireless controllers, what DSCP marking is applied by default to guest traffic?

10

0

34

46

5. True or false: Changing an access point’s (AP’s) mode from FlexConnect to local mode causes the AP to reboot and rejoin the wireless LAN controller after a few minutes.

True

False

6. Which wireless controller mode is depicted in the following figure?

Multicast-multicast mode

Broadcast-unicast mode

Multicast-unicast mode

Broadcast-broadcast mode

7. An engineer configured a Cisco AireOS controller with two TACACS+ servers. The engineer notices that when the primary TACACS+ server fails, the WLC starts using the secondary server as expected, but the WLC does not use the primary server again until the secondary server fails or the controller is rebooted.

Which cause of this issue is true?

Fallback is enabled

Fallback is disabled

DNS query is disabled

DNS query is enabled

8. An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets.

If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC.

Which feature meets these requirements?

learn client IP address

Flex Connect local authentication

VLAN-based central switching

central DHCP processing

9. Which ACLs are used for splash page redirection on AireOS controllers?

VLAN ACLs

WebAuth/web passthrough ACLs

Web policy ACLs

Split tunnel ACLs

10. An engineer set up identity-based networking with ISE and configured AAA override on the WLAN.

Which two attributes must be used to change the client behavior from the default settings? (Choose two.)

DHCP timeout

DNS server

IPv6 ACL

DSCP value

multicast address

11. Which of the following TACACS+ authorization roles are valid on Cisco AireOS controllers? (Choose all thet apply)

MONITOR

WIRELESS

SECURITY

COMMANDS

WLAN

SYSTEM

TROUBLESHOOTING

12. What is a key requirement to enable split tunneling on a FlexConnect AP?

The centrally switched WLAN must have the locally switched option selected.

NAT/PAT must be configured to allow centrally switched traffic to access the local VLA

An ACL must be used for split tunneling to take effect.

Split tunneling must be configured at the FlexConnect group level.

13. Which of the following is not a key component of the wireless network authentication framework?

Supplicant

Authenticator

Authentication server

Identity store

Intrusion Detector

14. Which license is required in Cisco Connected Mobile Experiences (CMX) to activate CMX Connect?

Advanced license

See license

Activation license

Base license

15. Which of the following allow you to control DSCP values on a wireless client?

Meraki MDM

Microsoft Group Policy

Apple Configurator

Cisco Prime

16. Which feature helps wireless LAN controllers send messages about client mobility to each other all at once?

Multicast

Broadcast

Anycast

Unknown unicast

17. What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?

EAP-PEAP with 802.1x port authentication

EAP-TLS with 802.1x port authentication

EAP-FAST with CAPWAP DTLS + port authentication

EAP-FAST with CAPWAP DTLS

18. Which EDCA metric defines how long a station may continue transmitting?

AIFSN

CWmin

CWmax

TXOP

TSpec

19. Which of the following are advantages of implementing LWA using a controller’s internal portal?

Fast

Inexpensive

Easy

Scalable

Access to use-case driver portals

20. Which of the following statements are true about Central Web Authentication (CWA)?

With CWA, there is no need for a local Web Auth certificate on the controller.

CWA is included with the controller.

CWA happens purely at Layer 3.

CWA requires an external authentication server and portal.

CWA happens at both Layer 2 and Layer 3.

21. What are the main protocols and technologies available for indoor location?

Global Positioning System (GPS)

Ultra-Wideband (UWB)

General Packet Radio Service (GPRS)

Bluetooth / Bluetooth Low Energy (BLE)

Sat Nav

Wi-Fi

22. What methods are available to control QoS on a wireless client? (Choose all that apply.)

Microsoft Group Policy

Apple Configurator

Meraki MDM

Catalyst Center (formerly called DNA Center)

23. Refer to the exhibit.





Which area indicates the greatest impact on the wireless network when viewing the Cisco CleanAir Zone of Impact map of interferers?

A

B

C

D

24. How many access categories are defined by EDCA?

Two

Four

Eight

Unlimited

25. What is a unique characteristic of CSMA/CA?

The AP uses a point coordination function to instruct the stations when to send.

CSMA/CA is able to detect collisions after transmission.

CSMA/CA avoids collisions by first asking permission of the AP to send.

Every frame must be acknowledged by the receiving station.

26. Which one of the following wireless client specifications is helpful in designing the size of an AP cell?

The antenna gain

The receiver sensitivity

The number of spatial streams

The data rates supported

27. What does FastLocate enable, for infrastructure-based location services?

Faster Wi-Fi client association

Higher bandwidth

Higher location accuracy

RFID tag location

28. What is the result if all the stations in a wireless network start transmitting at same time on the same channel?

Higher wireless throughput

Better user experience

Uncontrollable collisions

Faster download speeds

29. An engineer must create an account to log in to the CLI of an access point for troubleshooting.

Which configuration on the WLC will accomplish this?

ReadWrite User Access Mode

Global Configuration Enable Password

SNMP V3 User

Allow New Telnet Sessions

30. Which feature can be used to prevent the quality of multicast streams from suffering when used by real-time applications such as video due to the lower data rate constraint and a lack of QoS marking?

Multicast DNS (mDNS)

IGMP snooping

Multicast Direct

DNS snooping

31. Which of the following is software that runs on the client device that is responsible for providing the identity (the username) and password of the client to the authenticator over EAP?

Supplicant

Authenticator

Authentication server

Identity store

32. What is the maximum number of subordinate access points (APs) of the same model that can download the image from the primary AP?

Two

Three

Four

Five

33. As outlined by the 802.11 standard, which frames are transmitted at the highest mandatory data rate?

Unicast

Broadcast

Anycast

Multicast

34. Which of the following are non-802.11 devices that send signals within the bands of Cisco CleanAir access points (APs)?

Beacons

Interferers

BLE tags

RFIDs

35. How many retries may a station attempt before a Cisco AP dumps the frame?

128

64

32

16

36. Which of the following location techniques was inspired by airport radar?

RSSI trilateration technique

Cell of origin technique

Angle of arrival (AoA) technique

Signal-to-noise ratio technique

37. Which of the following will maximize the efficiency of multicast traffic transport over a wireless network, where the recipients are at various locations?

Use the default WLC multicast-unicast mode.

Use the WLC multicast-multicast mode.

Enable PIM on every WL

Multicast traffic is not supported over a wireless network.

38. A customer wants to allow employees to easily onboard their personal devices to the wireless network. The visitors also must be able to connect to the same network without the need to engage with anyone from the reception desk.

Which process must be configured on Cisco ISE to support this requirement?

MAC authentication bypass

native supplicant provisioning

local web auth

self-registration guest portal

39. Which of the following authentication methods does Extensible Authentication Protocol (EAP) employ?

WPA

802.1X

LDAP

RADIUS

40. Where can the web portal reside with Local Web Authentication (LWA)?

IDS (intrusion detection system)

Wireless client

Wireless LAN controller

Remote server

 Loading...