Download NSE6_SDW_AD-7.6 Dumps (V9.02) 2026 for Better Exam Preparation – Read Our NSE6_SDW_AD-7.6 Free Dumps (Part 2, Q41-Q80) Today

Download the Fortinet NSE6_SDW_AD-7.6 dumps (V9.02) from DumpsBase to prepare more effectively for the Fortinet NSE 6 – SD-WAN 7.6 Enterprise Administrator exam. Our updated dumps have proven that all questions and answers are valid for passing. You can read our NSE6_SDW_AD-7.6 free dumps (Part 1, Q1-Q40) of V9.02 to review the quality. Then you can find that our dumps contain the exam-focused questions, helping you prepare more efficiently and improving your confidence. Also, by reading our free dumps, you can trust that these updated NSE6_SDW_AD-7.6 exam dumps (V9.02) will help you become familiar with the latest exam structure and question style. By practicing regularly, you can better understand how exam questions are written, identify key topics, and improve your ability to choose the correct answers under exam pressure. Today, we will continue to share more demos online, helping you trust that DumpsBase should be your best learning partner.

Here are the Fortinet NSE6_SDW_AD-7.6 free dumps (Part 2, Q41-Q80) of V9.02 for checking more:

1. Which CLI command do you use to perform real-time troubleshooting for ADVPN negotiation?

diagnose debug application ike

diagnose sys virtual-wan-link service

get ipsec tunnel list

get router info routing-table

2. Which SD-WAN deployment model allows for a mix of private and public connectivity?

Hybrid SD-WAN

Internet-only SD-WAN

Cloud-delivered SD-WAN

On-premises SD-WAN

3. FortiGate is connected to the internet and is obtaining the IP address on its egress interlace from the DHCP server.

Which statement is due when FortiGate restarts and receives preconfigured settings to install as part of a zero-touch provisioning process?

The zero-touch provisioning process completes internally, behind FortiGate

FortiManager registers FortiGate after the restart and retrieves the existing configuration

The FortiGate cloud key added to the FortiGate cloud portal and FortiGate performs a factory reset before the restart

FortiDeploy connects with FortiGate and provides the initial configuration to contact FortiManager

4. What is the purpose of using FortiManager for SD-WAN deployment management?

To configure network connectivity between sites

To centralize configuration and management

To configure security policies

To ensure efficient use of available bandwidth

5. You are configuring SD-WAN zones and members on a FortiGate device.

Which two facts should you take into account? (Choose two.)

The default zone is sdw-default

The default zone is virtual-wan-link.

You can add any physical interface to a zone.

You can add only SD-WAN members to a zone.

6. Which two statements about SD-WAN rules are true? (Choose two.)

Regular policy routes take precedence over SD-WAN rules.

SD-WAN rules take precedence over static routes.

SD-WAN rules can be used only to define load balancing methods.

SD-WAN rules are treated as static routes.

7. Which best describes the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?

Interface-based shaping mode

Reverse-policy shaping mode

Shared-policy shaping mode

Per-IP shaping mode

8. What is the purpose of configuring SD-WAN Members and Performance SLAs?

To configure routing protocols

To configure security policies

To configure application performance monitoring

To configure VPN connectivity

9. Refer to exhibits









Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.

Based on the FortiGate configuration shown in the exhibits, what are two issues you might encounter when creating an SD-WAN interface on port1 and port2? (Choose two)

Member interface that have IP address of 0.0.0.0/0.0.0.0

Member interfaces that are referenced by any other configuration element

Member interfaces that are administratively down

Member interfaces that are physical interfaces as well as VLAN aggregate, and iPsec interfaces

10. Which SD-WAN traffic shaping technique uses deep packet inspection to identify and prioritize traffic?

Quality of Service (QoS)

Link steering

Application steering

Load balancing

11. Refer to the exhibit.





Which are two expected behaviors of the traffic that matches the traffic shaper? (Choose two.)

The number of simultaneous connections among all source IP addresses can exceed 5 connections.

The traffic shaper limits the combined bandwidth of all connections to a maximum of 5 MB/sec.

The number of simultaneous connections allowed for each source IP address can exceed 5 connections.

The traffic shaper limits the bandwidth of each source IP address to a maximum of 625 KB/sec.

12. What is the purpose of using FortiManager with FortiDeploy for SD-WAN management?

To automate configuration deployment

To centralize configuration and management

To configure security policies

To ensure efficient use of available bandwidth

13. Which SD-WAN feature allows for the prioritization of critical traffic over less important traffic?

Load balancing

Quality of service (QoS)

Application steering

Link steering

14. In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two.)

Traffic has matched none of the FortiGate policy routes.

Matched traffic failed RPF and was caught by the rule.

The FIB lookup resolved interface was the SD-WAN interface.

An absolute SD-WAN rule was defined and matched traffic.

15. What is the lnkmtd process responsible for?

Flushing route tags addresses

Monitoring links for any bandwidth saturation

Logging interface quality information

Processing performance SLA probes

16. What is the most common cause of SD-WAN connectivity issues?

Firewall configuration errors

Misconfigured routing protocols

Network congestion

Software bugs

17. Which feature of SD-WAN allows for automatic failover in case of a network outage?

Load balancing

Quality of service (QoS)

Application steering

Link steering

18. Which two interfaces are considered overlay links? (Choose two.)

LAG

IPsec

Physical

GRE

19. What is the purpose of configuring performance SLAs in SD-WAN?

To improve network security

To ensure high application performance

To reduce bandwidth usage

To simplify configuration and management

20. Which action FortiGate performs on traffic that is subject to a per-IP traffic shaper of 10 Mbps?

FortiGate guarantees a minimum of 10 Mbps of bandwidth to each source IP address.

FortiGate applies traffic shaping to the original traffic direction only.

FortiGate limits each source IP address to a maximum bandwidth of 10 Mbps.

FortiGate shares 10 Mbps of bandwidth equally among all source IP addresses.

21. Refer to the exhibit.





Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)

The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.

The traffic shaper drops packets if the bandwidth is less than 2500 KBps.

The traffic shaper drops packets if the bandwidth exceeds 6250 KBps.

The measured bandwidth is less than 100 KBps.

22. Which are three key routing principles in SD-WAN? (Choose three.)

FortiGate performs route lookups for new sessions only.

Regular policy routes have precedence over SD-WAN rules.

SD-WAN rules have precedence over ISDB routes.

By default, SD-WAN members are skipped if they do not have a valid route to the destination.

By default, SD-WAN rules are skipped if the best route to the destination is not an SD-WAN member.

23. Refer to the exhibit.





Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?

The type of traffic defined and allowed on firewall policy ID 1 is UD

Changes have been made on firewall policy ID 1 on FortiGate.

Firewall policy ID 1 has source NAT disabled.

FortiGate has terminated the session after a change on policy ID 1.

24. Refer to the exhibit.









How does FortiGate handle the traffic with the source IP address 10.0.1.27 and the destination IP address 128.66.0.111?

FortiGate steers the traffic through port1.

FortiGate drops the traffic flow.

FortiGate steers the traffic through port2.

FortiGate routes the traffic flow according to the forwarding information base (FIB), to either port1 or port2.

25. Refer to the exhibit.





Based on the exhibit, which action does FortiGate take?

FortiGate bounces port5 after it detects all SD-WAN members as dead.

FortiGate fails over to the secondary device after it detects all SD-WAN members as dead.

FortiGate brings up port5 after it detects all SD-WAN members as alive.

FortiGate brings down port5 after it detects all SD-WAN members as dead.

26. Which two statements are correct when traffic matches the implicit SD-WAN rule? (Choose two.)

The sdwan_service_id flag in the session information is 0.

All SD-WAN rules have the default setting enabled.

Traffic does not match any of the entries in the policy route table.

Traffic is load balanced using the algorithm set for the v4-ecmp-mode setting.

27. What is the purpose of configuring a basic SD-WAN DIA setup?

To configure virtual networks

To configure quality of service (QoS)

To configure security policies

To configure WAN optimization

28. Which two interfaces can be added to SD-WAN as members? (Choose two.)

IPsec interface

VLAN

Zone

Virtual wire pair

29. Which statement about using BGP routes in SD-WAN is true?

Adding static routes must be enabled on all ADVPN interfaces.

VPN topologies must be form using only BGP dynamic routing with SD-WA

Learned routes can be used as dynamic destinations in SD-WAN rules.

Dynamic routing protocols can be used only with non-encrypted traffic.

30. Which two statements about SD-WAN zones are true? (Choose two.)

You are allowed to create static routes that reference an SD-WAN zone.

After you add an interface to SD-WAN as member, you must use zones to reference the member in firewall policies.

You must configure the SD-WAN zone with a minimum of two members.

You can configure only one SD-WAN zone per VDO

31. An administrator configured a best quality SD-WAN rule with WAN1 and WAN2 as members. WAN1 has the highest configuration priority, and link-cost-threshold is set to 10. FortiGate reports a latency of 100 ms and 120 ms for WAN1 and WAN2, respectively.

Which change in the measured latency will make WAN2 the new preferred member?

When WAN2 has a latency lower than ~91 ms

When WAN1 has a latency lower than 100 ms

When WAN1 has a latency of 120 ms

When WAN2 has a latency of 100 ms

32. Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two.)

It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links.

It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance.

It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub.

It provides direct connectivity between all sites by creating on-demand tunnels between spokes.

33. What is the route-tag setting in an SD-WAN rule used for?

To indicate the routes for health check probes.

To indicate the destination of a rule based on learned BGP prefixes.

To indicate the routes that can be used for routing SD-WAN traffic.

To indicate the members that can be used to route SD-WAN traffic.

34. Which three matching traffic criteria are available in SD-WAN rules? (Choose three.)

Type of physical link connection

Internet service database (ISDB) address object

Source and destination IP address

URL categories

Application signatures

35. Which diagnostic command can you use to show the SD-WAN rules interface information and state?

diagnose sys virtual-wan-link route-tag-list.

diagnose sys virtual-wan-link service.

diagnose sys virtual-wan-link member.

diagnose sys virtual-wan-link neighbor.

36. Refer to the exhibit.





Based on the output, which two conclusions are true? (Choose two.)

The all_rules rule represents the implicit SD-WAN rule.

There is more than one SD-WAN rule configured.

Entry 1 (id=1) is a regular policy route.

The SD-WAN rules takes precedence over regular policy routes.

37. What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)

The FortiGate cloud key has not been added to the FortiGate cloud portal.

FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager.

FortiGAte has obtained a configuration from the platform template in FortiGate cloud.

A factory reset performed on FortiGate.

The zero-touch provisioning process has been completed internally, behind FortiGate.

38. What is the main benefit of using FortiManager for SD-WAN deployment management?

Simplified configuration and management

Improved security

Increased application performance

Better network connectivity

39. What is the purpose of deploying ADVPN in a hub-and-spoke IPsec topology for SD-WAN?

To ensure secure communication between sites

To improve application performance

To simplify configuration and management

To provide high-speed internet connectivity

40. Which SD-WAN deployment type is most suitable for a hub-and-spoke IPsec topology with ADVPN?

Internet-only SD-WAN

Hybrid SD-WAN

Cloud SD-WAN

Branch SD-WAN

 Loading...