Dell D-PE-OE-23 Dumps Updated – Choose D-PE-OE-23 Dumps (V9.02) to Prepare and Read D-PE-OE-23 Free Dumps (Part 1, Q1-Q40) Today to Verify

1. A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system.

What Is the cause of this Issue? Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

2. What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?

3. What happens when the Hardware Root of Trust fails to validate the BIOS?

4. A technician receives a new server with five drives.

They need to configure the drives based on the following requirements received from the administrator:

- Drive 0 as a single disk with no RAID

- Drives 1-3 as a RAID 5 with drive 4 as a hot spare just for this newly created RAID 5

The administrator plans to add more disks as separate RAID arrays at a later date but only wants drive 4 to be available for this first RAID 5 set.

How should the technician configure the drives?

5. A technician must update the firmware on a savor, but has no network connectivity.

What can the technician use to update the BIOS and iDRAC/ lifecycle Controller firmware?

6. A Dell EMC PowerEdge server has been updated with an LCC and iDRAC DUP to the latest firmware when performing a firmware rollback?

7. A technician wants to configure the iDRAC on a new server using the iDRAC Quick Sync 2 feature.

What is required to use this feature?

8. Which is responsible for controlling the NVMe disks, when using a Paddle Card in a PowerEdge 15G server?

9. A technician needs to configure a server to allow the OS to manipulate processor frequencies for higher power efficiency.

Which setting can they enable to achieve this?

10. How can a system administrator compare the currently installed hardware to the original system configuration?

11. A server has six memory modules attached to each CPU Memory Optimizer mode is configured. The user now wants to have maximum protection for the memory but cannot afford to lose any memory space.

What should the technician install/configure?

12. Where is the LCD panel located on a Dell PowerEdge 16G server?

13. A technician is trying to troubleshoot a server that constantly keeps raising and lowering the RPMs of the fans.

The technician investigates and finds the following:

- No errors are displayed

- No obvious log entries exist concerning temperatures

- Server cover is installed and secured

- No expansion cards are installed

What would be the quickest action plan that the technician could attempt to try to fix the issue with the fans?

14. A technician installs a PCIe card into a server, but the card does not appear in the OS. The server does not have an LCD to display errors, but a light is flashing on the front of the server.

What actions can the technician take to troubleshoot the issue?

15. What is the minimum number of components, beside the system board, required to POST?

16. Which export type in iDRAC restores a Server Configuration Profile to a known baseline?

17. A technician is setting up SNMP Trap Alerts on a 14G servers.

After specifying the trap destination address, what should be the next step?

18. A technician is installing Windows Server 2016 on a server with RAID 1 and RAID 5 virtual disks.

How should they configure the server and deploy the OS?

19. What is the maximum number of CPU cores that can be configured in a Dell EMC PowerEdge R6525 server?

20. A Dell EMC PowerEdge server logs the following CPU Machine Check error: CPU1 IERR.

What action might be required to solve the alert?

21. A technician needs to perform a RAID controller firmware update from within the Operating System. The server runs Red Hat Enterprise Linux and is configured with an iDRAC basic license.

Which three steps should the technician take to complete this task? (Choose three.)

22. A technician must create a RAID array that uses striping with double parity.

Which RAID level must be used?

23. A technician installs eight servers into a fully operational rack with top of rack switch Each server has a quad 1Gb NIC and redundant power supplies. The company uses iDRAC in shared LOM mode with LOM1 as the selected NIC.

What should the technician do to verify iDRAC connectivity on each server?

24. Which Dell PowerEdge 16G server has the highest GPU density to run workloads like HPC, AI, DB Analytics, and VDI?

25. A technician in Portland, Oregon has been asked to update the firmware on a server in Omaha, Nebraska. They will use an NFS server also located in Nebraska for serving patches that have been vetted by their security teams.

What two pieces of information does the technician need in order to access the NFS patch server from the Lifecycle Controller or iDRAC? (Choose two.)

26. A remote technician needs to update the iDRAC with Lifecycle Controller firmware using the iDRAC GUI. They have downloaded the iDRAC firmware to the management station and connected to the iDRAC GUI.

What step is required to complete this task?

27. A technician is investigating a server that is reporting that the Lifecycle Controller is disabled during the power-on procedure.

After checking that the system is displaying no other errors, how can the technician re-enable the Lifecycle Controller?

28. A technician wants to install a new version of OMSA onto a server that already has an existing version of OMSA.

What is required for this new installation?

29. Eight new servers have arrived at a datacenter. All use static IP addresses for iDRAC. The technician needs to enable these servers to contact the DHCP server on the network to obtain new IP addresses.

What method can the technician use to quickly switch to DHCP?

30. Which front disk chassis option is available in a Dell EMC PowerEdge R740 server?

31. You have been tasked with configuring a Dell EMC PowerEdge server to be a file server. The server operating system has been installed and there are 8 x 1TB drives that must be configured.

Which RAID configuration would provide the maximum usable space with maximum redundancy?

32. What type of fans are installed in servers with NVMe storage and GPU configurations?

33. What is used by the Lifecycle Controller to directly back up the server profile on a 14G Dell EMC PowerEdge server?

34. SPECIAL INSTRUCTIONS

The remaining Part1 questions are associated with four case studies that describe various environments or settings. Each case study appears on its own display screen. Questions for each case study will appear on separate display screens. When displaying a question, you can easily review the related case study by clicking on the 'Review Case Study' icon shown below:

Case Study 5 - Refer to the Exhibit.

Backing up data from a Dell EMC Isilon cluster exceeds the company's backup window. Because the company has a large amount of data with a continuous high growth rate, they want to change their backup strategy. The Gen 6 Isilon cluster consists of 24 nodes.

Their current backup strategy is an NDMP three-way backup performing weekly full backups to tape and incremental backups each night. The strategy uses Dell EMC Net Worker. The DMA uses Include paths to specify what data to backup. All data on the cluster must remain accessible.

The company's IT team is now looking for a method to increase the performance of their backups. After some investigations, you notice that the backup job quiesces the file system. This is creating lock contention issues on open files and not allowing users full access to data when the backup job runs.

What advice should be provided to the team to eliminate lock contention and allow full access to users?

35. A system admin needs to create a new iDRAC use that should NOT have privileges to change any iDRAC features or ability to configure additional users.

Which user configuration options will meet these criteria?

36. A technician is sent on-site to troubleshoot a server that halts during POST. The iDRAC System Event Log shows the following errors: A bus fatal error was detected on a component at bus 0 device 1 function 1 A bus fatal error was detected on a component at bus 1 device 0 function 0 CPU 1 has an internal error (IERR)

The following system information is provided.

Which system component is the most likely cause?

37. A system administrator plans to use a remote desktop that has the DRAC tools installed to run RACADM commands.

Which two CLI options must be in the RACADM command? (Select 2)

38. Which tool allows an administrator to remotely back up a PowerEdge server configuration to streamline server deployments?

39. Which three steps must a technician take prior to replacing a server component with blue tabs/release? (Choose three.)

40. How can a technician know whether IDRAC9 System Lockdown mode is enabled?