300-410 Free Dumps (Part 2, Q41-Q80) of V31.02 Are Online – Check the Demos to Verify the Most Current Resource

When searching for the most current resource at DumpsBase, you should confirm that the 300-410 dumps (V31.02) are the latest version, offering 640 practice questions and answers for you to validate your advanced technical skills, boost your credibility, and unlock better job opportunities, higher salaries, and long-term career growth in today’s competitive IT industry. You can check the 300-410 free dumps (Part 1, Q1-Q40) of V31.02 first. And you will find that our 300-410 exam dumps are fully aligned with the current exam objectives, helping you succeed with confidence. With DumpsBase’s updated 300-410 exam dumps (V31.02), you can prepare efficiently, stay ahead of exam changes, and pass your Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) certification on the first attempt. And today, we will continue to share the free demos online. With these demo questions, you can trust that the 300-410 dumps (V31.02) are the best choice.

Below are the Cisco 300-410 free dumps (Part 2, Q41-Q80) of V31.02 for reading:

1. A network engineer needs to verify IP SLA operations on an interface that shows on indication of excessive traffic.

Which command should the engineer use to complete this action?

show frequency

show track

show reachability

show threshold

2. Refer to the exhibit.





After redistribution is enabled between the routing protocols; PC2, PC3, and PC4 cannot reach PC1.

Which action can the engineer take to solve the issue so that all the PCs are reachable?

Set the administrative distance 100 under the RIP process on R2.

Filter the prefix 10.1.1.0/24 when redistributed from OSPF to EIGR

Filter the prefix 10.1.1.0/24 when redistributed from RIP to EIGR

Redistribute the directly connected interfaces on R2.

3. What is the output of the following command:

show ip vrf

Show's default RD values

Displays IP routing table information associated with a VRF

Show's routing protocol information associated with a VR

Displays the ARP table (static and dynamic entries) in the specified VRF

4. Refer to the exhibit.





An engineer receives this error message when trying to access another router in-band from the serial interface connected to the console of R1.

Which configuration is needed on R1 to resolve this issue?

R1(config)#line console 0 R1(config-line)#transport preferred ssh

R1(config)#line vty 0 R1(config-line)#transport output ssh

R1(config)#line vty 0 R1(config-line)#transport output ssh R1(config-line)#transport preferred ssh

R1(config)#line console 0 R1(config-line)#transport output ssh

5. Refer to the exhibit.





What does the imp-null tag represent in the MPLS VPN cloud?

Pop the label

Impose the label

Include the EXP bit

Exclude the EXP bit

6. Which label operations are performed by a label edge router?

SWAP and POP

SWAP and PUSH

PUSH and PHP

PUSH and POP

7. Refer to the exhibit.





R1 is connected with R2 via GigabitEthernet0/0, and R2 cannot ping R1.

What action will fix the issue?

Fix route dampening configured on the router.

Replace the SFP module because it is not supported.

Fix IP Event Dampening configured on the interface.

Correct the IP SLA probe that failed.

8. Refer to the exhibit.





An engineer is trying to connect to a device with SSH but cannot connect. The engineer connects by using the console and finds the displayed output when troubleshooting.

Which command must be used in configuration mode to enable SSH on the device?

no ip ssh disable

ip ssh enable

ip ssh version 2

crypto key generate rsa

9. Which attribute eliminates LFAs that belong to protected paths in situations where links in a network are connected through a common fiber?

shared risk link group-disjoint

linecard-disjoint

lowest-repair-path-metric

interface-disjoint

10. Refer to the exhibit.





AAA server 10.1.1.1 is configured with the default authentication and accounting settings, but the switch cannot communicate with the server.

Which action resolves this issue?

Match the authentication port

Match the accounting port

Correct the timeout value.

Correct the shared secret.

11. Which option is the best for protecting CPU utilization on a device?

fragmentation

COPP

ICMP redirects

ICMP unreachable messages

12. Refer to the exhibit.





A user cannot SSH to the router.

What action must be taken to resolve this issue?

Configure transport input ssh

Configure transport output ssh

Configure ip ssh version 2

Configure ip ssh source-interface loopback0

13. Refer to the exhibit.





Which statement about R1 is true?

OSPF redistributes RIP routes only if they have a tag of one.

RIP learned routes are distributed to OSPF with a tag value of one.

R1 adds one to the metric for RIP learned routes before redistributing to OSP

RIP routes are redistributed to OSPF without any changes.

14. Refer to the exhibit.





In which circumstance does the BGP neighbor remain in the idle condition?

if prefixes are not received from the BGP peer

if prefixes reach the maximum limit

if a prefix list is applied on the inbound direction

if prefixes exceed the maximum limit

15. Refer to the exhibit.





The server for the finance department is not reachable consistently on the 200.30.40.0/24 network and after every second month it gets a new IP address.

Which two actions must be taken to resolve this Issue? (Choose two.)

Configure the server to use DHCP on the network with default gateway 200 30.40.100.

Configure the server with a static IP address and default gateway.

Configure the router to exclude a server IP address.

Configure the server to use DHCP on the network with default gateway 200 30.30.100.

Configure the router to exclude a server IP address and default gateway.

16. An engineer is trying to copy an IOS file from one router to another router by using TFTP.

Which two actions are needed to allow the file to copy? (Choose two.)

Copy the file to the destination router with the copy tftp: flash: command

Enable the TFTP server on the source router with the tftp-server flash: <filename> command

TFTP is not supported in recent IOS versions, so an alternative method must be used

Configure a user on the source router with the username tftp password tftp command

Configure the TFTP authentication on the source router with the tftp-server authentication local command

17. An engineer configured the wrong default gateway for the Cisco DNA Center enterprise interface during the install.

Which command must the engineer run to correct the configuration?

sudo maglev-config update

sudo maglev install config update

sudo maglev reinstall

sudo update config install

18. Which protocol does MPLS use to support traffic engineering?

Tag Distribution Protocol (TDP)

Resource Reservation Protocol (RSVP)

Border Gateway Protocol (BGP)

Label Distribution Protocol (LDP)

19. Refer to Exhibit.





Which statement about redistribution from BGP into OSPF process 10 is true?

Network 172.16.1.0/24 is not redistributed into OSP

Network 10.10 10.0/24 is not redistributed into OSPF

Network 172.16.1.0/24 is redistributed with administrative distance of 1.

Network 10.10.10.0/24 is redistributed with administrative distance of 20.

20. Users were moved from the local DHCP server to the remote corporate DHCP server. After the move, none of the users were able to use the network.

Which two issues will prevent this setup from working properly? (Choose two)

Auto-QoS is blocking DHCP traffic.

The DHCP server IP address configuration is missing locally

802.1X is blocking DHCP traffic

The broadcast domain is too large for proper DHCP propagation

The route to the new DHCP server is missing

21. When provisioning a device in Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not compatible with template”.

What is the reason for the error?

The template has an incorrect configuration.

The software version of the template is different from the software version of the device.

The changes to the template were not committed.

The tag that was used to filter the templates does not match the device tag.

22. Refer to the exhibit.









To provide reachability to network 10.1.1.0 /24 from R5, the network administrator redistributes EIGRP into OSPF on R3 but notices that R4 is now taking a ........... path through R5 to reach 10.1.1.0/24 network.

Which action fixes the issue while keeping the reachability from R5 to 10.1.1.0/24 network?

Change the administrative distance of the external EIGRP to 90.

Apply the outbound distribution list on R5 toward R4 in OSP

Change the administrative distance of OSPF to 200 on R5.

Redistribute OSPF into EIGRP on R4

23. Which two statements about VRF-Lite configurations are true? (Choose two.)

They support the exchange of MPLS labels

Different customers can have overlapping IP addresses on different VPNs

They support a maximum of 512.000 routes

Each customer has its own dedicated TCAM resources

Each customer has its own private routing table.

They support IS-IS

24. DRAG DROP

Drag and drop the MPLS VPN device types from me left onto the definitions on the right.

25. An engineer needs dynamic routing between two routers and is unable to establish OSPF adjacency.

The output of the show ip ospf neighbor command shows that the neighbor state is EXSTART/EXCHANGE.

Which action should be taken to resolve this issue?

match the passwords

match the hello timers

match the MTUs

match the network types

26. Refer to the exhibit.





An engineer is trying to block the route to 192.168.2.2 from the routing table by using the configuration that is shown. The route is still present in the routing table as an OSPF route.

Which action blocks the route?

Use an extended access list instead of a standard access list.

Change sequence 10 in the route-map command from permit to deny.

Use a prefix list instead of an access list in the route map.

Add this statement to the route map: route-map RM-OSPF-DL deny 20.

27. Which statement about MPLS LDP router ID is true?

If not configured, the operational physical interface is chosen as the router ID even if a loopback is configured.

The loopback with the highest IP address is selected as the router I

The MPLS LDP router ID must match the IGP router I

The force keyword changes the router ID to the specified address without causing any impact.

28. Refer to the exhibit.









The output of the trace route from R5 shows a loop in the network.

Which configuration prevents this loop?

A)





B)





C)





D)

Option A

Option B

Option C

Option D

29. Refer to the exhibit.





ISP 1 and ISP 2 directly connect to the Internet. A customer is tracking both ISP links to achieve redundancy and cannot see the Cisco IOS IP SLA tracking output on the router console.

Which command is missing from the IP SLA configuration?

Start-time 00:00

Start-time 0

Start-time immediately

Start-time now

30. Which list defines the contents of an MPLS label?

20-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTL

32-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTL

20-bit label; 3-bit flow label; 1-bit bottom stack; 8-bit hop limit

32-bit label; 3-bit flow label; 1-bit bottom stack; 8-bit hop limit

31. Which statement about IPv6 ND inspection is true?

It learns and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables.

It learns and secures bindings for stateless autoconfiguration addresses in Layer 2 neighbor tables.

It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables.

It learns and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables.

32. Refer to the exhibit.





A company is evaluating multiple network management system tools. Trending graphs generated by SNMP data are returned by the NMS and appear to have multiple gaps. While troubleshooting the issue, an engineer noticed the relevant output.

What solves the gaps in the graphs?

Remove the exceed-rate command in the class map.

Remove the class map NMS from being part of control plane policing.

Configure the CIR rate to a lower value that accommodates all the NMS tools

Separate the NMS class map in multiple class maps based on the specific protocols with appropriate CoPP actions

33. While working with software images, an engineer observes that Cisco DNA Center cannot upload its software image directly from the device.

Why is the image not uploading?

The device must be resynced to Cisco DNA Center.

The software image for the device is in install mode.

The device has lost connectivity to Cisco DNA Center.

The software image for the device is in bundle mode

34. What is a prerequisite for configuring BFD?

Jumbo frame support must be configured on the router that is using BF

All routers in the path between two BFD endpoints must have BFD enabled.

Cisco Express Forwarding must be enabled on all participating BFD endpoints.

To use BFD with BGP, the timers 3 9 command must first be configured in the BGP routing process.

35. Refer to the exhibit.





An engineer is troubleshooting BGP on a device but discovers that the clock on the device does not correspond to the time stamp of the log entries.

Which action ensures consistency between the two times?

Configure the service timestamps log uptime command in global configuration mode.

Configure the logging clock synchronize command in global configuration mode.

Configure the service timestamps log datetime localtime command in global configuration mode.

Make sure that the clock on the device is synchronized with an NTP server.

36. What is the role of a route distinguisher via a VRF-Lite setup implementation?

It extends the IP address to identify which VFP instance it belongs to.

It manages the import and export of routes between two or more VRF instances

It enables multicast distribution for VRF-Lite setups to enhance EGP routing protocol capabilities

It enables multicast distribution for VRF-Lite setups to enhance IGP routing protocol capabilities

37. Refer to the exhibit.





R1 is being monitored using SNMP and monitoring devices are getting only partial information.

What action should be taken to resolve this issue?

Modify the CoPP policy to increase the configured exceeded limit for SNM

Modify the access list to include snmptrap.

Modify the CoPP policy to increase the configured CIR limit for SNM

Modify the access list to add a second line to allow udp any any eq snmp

38. Which configuration enabled the VRF that is labeled “Inet” on FastEthernet0/0?

R1(config)# ip vrf Inet R1(config-vrf)#interface FastEthernet0/0 R1(config-if)#ip vrf forwarding Inet

R1(config)#router ospf 1 vrf Inet R1(config-router)#ip vrf forwarding FastEthernet0/0

R1(config)#ip vrf Inet FastEthernet0/0

R1(config)# ip vrf Inet R1(config-vrf)#ip vrf FastEthernet0/0

39. DRAG DROP

Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.

40. Refer to the exhibit.





An engineer is trying to redistribute OSPF to BGP, but not all of the routes are redistributed.

What is the reason for this issue?

By default, only internal routes and external type 1 routes are redistributed into BGP

Only classful networks are redistributed from OSPF to BGP

BGP convergence is slow, so the route will eventually be present in the BGP table

By default, only internal OSPF routes are redistributed into BGP

 Loading...