Updated 300-410 Dumps (V32.02) with 43 Q&As: Pass Your Exam with Confidence

Passing the 300-410 Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) exam on the first attempt with high marks is not a simple process, but it is highly attainable when you are completely equipped with the right practice test materials. DumpsBase has updated the Cisco 300-410 dumps to V32.02, providing you with 43 practice questions and answers. All these questions are aligned with the latest 300-410 ENARSI exam topics. You can get the most current 300-410 PDF alongside an interactive testing engine to seamlessly prepare for the Implementing Cisco Enterprise Advanced Routing and Services 300-410 exam. By leveraging these updated 300-410 exam dumps (V32.02), passing the Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) 300-410 exam becomes an incredibly simple and streamlined process.

Below are the 300-410 free dumps V32.02, helping you check the quality:

1. Refer to the exhibit.









An engineer must troubleshoot a connectivity issue Impacting the redistribution of the subnet 172.16.2.48/28 Into the OSPF domain.

Which configuration on router R1 advertises this subnet Into the OSPF

domain?

R1 (config)#route-map CCNP permit 10 R1(config-route-map)#match tag 200 R1 (config-route-map)#exit R1 (config)#router ospf 10 R1(config-router)#redistribute eigrp 100 subnets route-map CCNP

R1 (config)#route-map CCNP deny 10 R1(config-route-map)#match tag 200 R1 (config)#route-map CCNP permit 10 R1 (config)#router ospf 10 R1(config-router)#redistribute eigrp 100 subnets route-map CCNP C R1 (config)#route-map CCNP permit 10 R1(config-route-map)#match route-type internal R1 (config)#router ospf 10 R1(config-router)#redistribute eigrp 100 subnets route-map CCNP

R1 (config)#route-map CCNP permit 10 R1(config-route-map)#match route-type level-2 R1 (config )#router ospf 10 R1(config-router)#redistribute eigrp 100 subnets route-map CCNP

2. Refer to the exhibit.









The administrator configured the network devices for end-to-end reachability, but the ASBRs are not propagating routes to each other.

Which set of configurations resolves this issue?

router bgp 100 neighbor 10.1.1.1 route-reflector-client neighbor 10.1.2.2 route-reflector-client neighbor 10.1.3.3 route-reflector-client

router bgp 100 neighbor 10.1.1.1 ebgp-multihop neighbor 10.1.2.2 ebgp-multihop neighbor 10.1.3.3 ebgp-multihop

router bgp 100 neighbor 10.1.1.1 next-hop-self neighbor 10.1.2.2 next-hop-self neighbor 10.1.3.3 next-hop-self

router bgp 100 neighbor 10.1.1.1 update-source Loopback0 neighbor 10.1.2.2 update-source Loopback0 neighbor 10.1.3.3 update-source Loopback0

3. Refer to the exhibit.





AAA server 10.1.1.1 is configured with the default authentication and accounting settings, but the switch cannot communicate with the server.

Which action resolves this issue?

Match the accounting port.

Correct the shared secret.

Correct the timeout value.

Match the authentication port.

4. Refer to the exhibit.





Which policy configuration on R1 forwards any traffic that Is sourced from the 192.168.130.0/24 network to R2?

access-list 1 permit 192.168.130.0 0.0.0.255 i interface Gi0/1 ip policy route map test I route-map test permit 10 match ip address 1 set ip next-hop 172.20.40.2

access-list 1 permit 192.168.130.0 0.0.0.255 I interface Gi0/1 ip policy route-map test i route-map test permit 10 match ip address 1 set ip next-hop 172.20.40.1

access-list 1 permit 192.168.130.0 0.0.0.255 I interface Gi0/2 ip policy route-map test i route-map test permit 10 match ip address 1 set ip next-hop 172.20.20.1

access-list 1 permit 192.168.130.0 0.0.0.255 i interface Gi0/2 ip policy route-map test i route-map test permit 10 match ip address 1 set ip next-hop 172.20.20.2

5. Which router translates the customer routing information into VPNv4 routes to exchange VPNv4 routes with other devices through MP-BGP?

CE

PE

P

VPNv4 RR

6. Refer to the exhibit.





Host A successfully pings host C, but host B fails to ping host C.

Which action resolves this issue?

Change the first statement in access list 100 to permit access.

Enable loose mode uRP

Disable auto-summary In RIP and EIGR

Redistribute EIGRP 100 into RIP on R1.

7. Refer to the exhibit.





An engineer must block access to the console ports for all corporate remote Cisco devices based on the recent corporate security policy but the security team still can connect through the console port.

Which configuration on the console port resolves the issue?

login and password

exec 0 0

no exec

transport input telnet

8. Refer to the exhibit.





An engineer is troubleshooting an issue using the debug ip packet command and notices that no time stamps are shown on R4 to establish the event time.

Which configuration resolves this issue by showing time stamps regardless of the time zone in R4 logs?

service timestamps log datetime msec show-timezone

service timestamps log datetime localtime msec

service timestamps debug datetime msec show-timezone

service timestamps debug datetime localtime msec

9. Refer to the exhibit.





An administrator must harden a router, but the administrator failed to test the SSH access successfully to the router.

Which action resolves the issue?

Configure SSH on the remote device to log in using SS

SSH syntax must be ssh -I user ip to log in to the remote device.

SSH must be allowed with the transport output ssh command.

Configure enable secret to log in to the device.

10. R1 and R2 are configured as eBGP neighbors. R1 is in AS100 and R2 is in AS200.

R2 is advertising these networks to R1:

172.16.16.0/20

172.16.3.0/24

172.16.4.0/24

192.168.1.0/24

192.168.2.0/24

172.16.0.0/16

The network administrator on R1 must improve convergence by blocking all subnets of 172.16.0.0/16 major network with a mask lower than 23 from coming in.

Which set of configurations accomplishes the task on R1?

ip prefix-list PL-1 deny 172.16.0.0/16 ge 23 ip prefix-list PL-1 permit 0.0.0.0/0 le 32 I router bgp 100 neighbor 192.168.100.2 remote-as 200 neighbor 192.168.100.2 prefix-list PL-1 in

access-list 1 deny 172.16.0.0 0.0.254.255 access-list 1 permit any I router bgp 100 neighbor 192.168.100.2 remote-as 200 neighbor 192.168.100.2 distribute-list 1 in

ip prefix-list PL-1 deny 172.16.0.0/16 le 23 ip prefix-list PL-1 permit 0.0.0.0/0 le 32 I router bgp 100 neighbor 192.168.100.2 remote-as 200 neighbor 192.168.100.2 prefix-list PL-1 in

ip prefix-list PL-1 deny 172.16.0.0/16 ip prefix-list PL-1 permit 0.0.0.0/0 i router bgp 100 neighbor 192.168.100.2 remote-as 200 neighbor 192.168.100.2 prefix-list PL-1 in

11. Refer to the exhibit.





An engineer configured SNMP in R1 to be able to save and upload configurations to the SNMP server but failed when they tried to backup R1 configuration on the server.

Which configuration resolves the issue?

copy running-config tftp://10.66.66.66/r1-config

copy running-config tftp://10.66.66.66/c: r1-config

snmp-server tftp-server-list 66

snmp-server tftp-server-list 20

12. What is a role of route distinguishers in an MPLS network?

Route distinguishers are used for label bindings.

Route distinguishers allow multiple instances of a routing table to coexist within the edge router.

Route distinguishers make a unique VPNv4 address across the MPLS network.

Route distinguishers define which prefixes are imported and exported on the edge router.

 Loading...