HPE6-A85 Dumps Updated (V12.03) – Your Comprehensive Study Guide for HPE Aruba Certified Campus Access Associate Exam Preparation

1. What is the correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1?

2. When would you bond multiple 20MHz wide 802.11 channels?

3. What is indicated by a solid amber radio status LED on an Aruba AP?

4. What does WPA3-Personal use as the source to generate a different Pairwise Master Key (PMK) each time a station connects to the wireless network?

5. Which flew in a Layer 3 IPv4 packet header is used to mitigate Layer 3 route loops?

6. A network administrator with existing IAP-315 access points is interested in Aruba Central and needs to know which license is required for specific features Please match the required license per feature (Matches may be used more than once.)

7. A network technician is troubleshooting one new AP at a branch office that will not receive Its configuration from Aruba Central. The other APs at the branch are working as expected. The output of the 'show ap debug cloud-server command' shows that the "cloud conflg received" Is FALSE.

After confirming the new AP has internet access, what would you check next?

8. A network technician is using Aruba Central to troubleshoot network issues.

Which dashboard can be used to view and acknowledge issues when beginning the troubleshooting process?

9. You need to configure wireless access for several classes of loT devices, some of which operate only with 802 11b. Each class must have a unique PSK and will require a different security policy applied as a role There will be 15-20 different classes of devices and performance should be optimized

Which option fulfills these requirements?

10. Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln-band management using an SVl is being used?

11. Which Protocol Data Unit (PDU) represents the data link layer PDU?

12. When using Aruba Central what can identify recommended steps to resolve network health issues and allows you to share detailed information with support personnel?

13. You need to troubleshoot an Aruba CX 6200 4-node VSF stack switch that fails to boot correctly Select the option that allows you to access the switch and see the boot options available for OS images and ServiceOS.

14. A hospital uses a lot of mobile equipment for the diagnosis and documentation of patient data.

What Is the ideal access switch for this large hospital with distribution racks of over 400 ports in a single VSF stack?

15. Which device configuration group types can a user define in Aruba Central during group creation? (Select two.)

16. What can be done to dynamically set the PoE Priority on a switch port when deploying IP cameras APs. and other PoE devices?

17. Please match the use case to the appropriate authentication technology

18. Make sure the interfaces are all ON.

Which configuration script will achieve the task?

19. Based on the "snow ip route" output on an AruDaCX 8400. what type of route is "10.1 20 0/24, vrf default via 10.1.12.2. [1/0]"?

20. Which statement is correct when comparing 5 GHz and 6 GHz channels with identical channel widths?

21. What is the ideal Aruba access switch for a cost-effective connection to 200-380 clients, printers and APs per distribution rack?

22. Which statement about manual switch provisioning with Aruba Central is correct?

23. What is an advantage of using Layer 2 MAC authentication?

24. What is the recommended VSF topology? (Select two.)

25. You put in a few show commands on switches EDGE1 and CORE1 to attempt to gather information to troubleshoot the issue Use the show command output images to determine the reason for the EDGE1 uplink being down

26. You need to drop excessive broadcast traffic on ingress to an ArubaOS-CX switch.

What is the best technology to use for this task?

27. Which authentication does Aruba's Captive Portal use?

28. Where are wireless client roaming decisions made?

29. Which feature can network administrators use to centralized RF planning and optimization service when using an Aruba mobility master architecture?

30. Match the feature to the Aruba OS version (Matches may be used more than once.)

31. When using an Aruba standalone AP you select "Native VLAN" for the Client VLAN Assignment.

In which subnet will the client IPs reside?

32. When performing live firmware upgrades on Aruba APs.

Which technology partitions all the APs based on RF neighborhood data minimizing the impact on clients?

33. You are configuring a network with a stacked pair of 6300M switches used for distribution and layer 3 services. You create a new VLAN for users that will be used on multiple access stacks of CX6200 switches connected downstream of the distribution stack You will be creating multiple VLANs/subnets similar to this will be utilized in multiple access stacks

What is the correct way to configure the routable interface for the subnet to be associated with this VLAN?

34. Refer to the exhibit.

In the given topology, a pair of Aruba CX 8325 switches are in a VSX stack using the active gateway.

What is the nature and behavior of the Virtual IP for the VSX pair if clients are connected to the access switch using VSX as the default gateway?

35. What are two advantages of a UXl? (Select two.)

36. What are the main characteristics of the 6 GHz band?

37. After having configured the edge switch uplink as requested your colleague says that they have failed to ping the core You ask your colleague to verify the connection is plugged in and the switch is powered on They confirm that both are correct You attempt to ping the core switch and confirm that the ping is failing.

Knowing the nature of this deployment, what commands might you use to troubleshoot this issued

38. Match the phase of message processing with the Open Systems interconnection (OSl) layer.

39. When measuring signal strength, dBm is commonly used and 0 dBm corresponds to 1 mW power.

What does -20 dBm correspond to?

40. The noise floor measures 000000001 milliwatts, and the receiver's signal strength is -65dBm.

What is the Signal to Noise Ratio?