Building HPE Hybrid IT Solutions HPE0-V14 Dumps V9.02 Released

1. A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.

Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?

2. A customer needs to share files cost-effectively among their Microsoft Windows server over a local network.

Which storage solution meets this requirement?

3. Which network protocol is used to build a loop-free logical topology for Ethernet networks?

4. DRAG DROP

Refer to the exhibit.

Drag the correct protocols from the left to the appropriate area on the topology on the right.

5. A customer needs to verify inbound packet statistics for interface Ten-GigabitEthernet 1/0/10 on an HPE FlexFabric 5900 series switch used by an iSCSI storage array.

Which command can be used in the CLI to perform this operation?

6. A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.

Which HPE management offering meets the customer’s needs?

7. A customer is planning to deploy a new Top of Rack solution.

They plan to use a stacking technology that meets the following requirements:

- Support for Multi Chassis Link Aggregation in an active-active mode.

- The control plane must not be a single point of failure.

- Rapid Fail-over. Unified Management.

- They require a maximum of two switches per stack.

Which stacking technology meets the customer’s requirements?

8. A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.

Which management solution provides this functionality?

9. What is a feature of the MSA 1050 that will help your Storage Customer better utilize storage resources?

10. Exhibit:

Which HPE ProLiant Server meets the customer's requirements?

11. An administrator deployed a new FlexFabric switch Into the environment and wants to collect baseline information from the switch The administrator wants to be able to use this in case there is any question from support should the administrator open a case.

Which command can the administrator use to collect support information from the switch?

12. A customer has the following requirements:

- two or more 10Gb SFP+ uplinks

- downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables.

- 24 downlink ports

Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?

13. A customer needs NFS access on a fiber channel array.

What must be included in the solution to meet this requirement?

14. DRAG DROP

Match each HPE solution to its corresponding technology usage.

15. A client needs a data center network for a highly-virtualized server environment.

They have the following requirements

- 25 Gb connectivity from the servers to the top-of-rack switches

- support for iSCSl storage

- lowest possible latency between their VM farms, which are contained In separate cabinets and connected to different top-of-rack switches within the data center

- support for Python script interpretation and open APIs

Which networking product line and architecture should you recommend?

16. What should you configure to limit the scope of broadcast domains in an Ethernet network?

17. Which component of HPE iLO provides continuous monitoring of more than 1600 parameters?

18. A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.

Which HPE tool should you recommend for performing this task?

19. A retail company recently implemented a Video surveillance solution. They now need an MSA storage solution with 100TB capacity. They want to be able to add more disk capacity if needed.

Which HPE tool can help you choose a storage solution, determine the total usable capacity, and create a BOM?

20. A customer has a VMware environment with HPE ProLiant servers and Nimble storage. They have been using a Windows VM to provide file services for their employees.

The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.

What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?

21. A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.

Switch A has the lower LACP System Priority.

Which LACP operation states describe the failure above?

22. A customer is facing high and unpredictable latency on an HPE ProLiant DL380 Gen10 server equipped with P408i-a controller

Which tool can display an Array Diagnostic Report?

23. What is used to identify a storage HBA port in a Fibre Channel SAN fabric?

24. DRAG DROP

A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.

Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

25. Where would a customer go to run the SSD wear Gauge report on an HPE ProLiant server?

26. A customer purchased a Nimble HF20 a year ago They are experiencing an issue with a few of their VMware servers in the RTP Nimble date center and asked that you make a recommendation based on the data in infoSight.

What should you recommend'?

27. What is a benefit of a NAS device?

28. A customer is purchasing a complete HPE solution that includes servers, storage, and networking. They need to leverage cloud storage for an off-site copy of their data in case of disaster.

Which HPE solutions should you suggest? (Choose two.)

29. DRAG DROP

Match the characteristic to the correct HPE ProLiant family.

30. DRAG DROP

Match each ProLiant solution to its ideal use case

31. DRAG DROP

Match each adapter to its characteristic.

32. A client complains about systems reliability issues caused by their staff’s inability to identify the root cause of failures. The client’s lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.

What should you configure in HPE OneView to enable the external monitoring of the managed devices?

33. DRAG DROP

Match each customer data center architecture to its network topology.

34. A customer is planning to deploy a branch office server rack.

The environment will have the following requirements:

- Single rack with 20 HPE ProLiant DL360 Gen10 Servers.

- Each Server will have 6 x 10G SFP+ Ports.

- Each Server will have a dedicated iLO port.

- The customer requires that only two switches be used.

- The customer requires separate control planes.

Which switch configuration can meet these requirements?

35. DRAG DROP

Match the Networking Product Family to the appropriate use case:

36. A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM.

Which HPE Solution should you propose?

37. Which protocol can be used to access a shared directory on a network-attached storage device?

38. You are creating a configuration for a new Nimble HF40 array.

Which tool should you use to ensure that you include adequate cache in the configuration?

39. DRAG DROP

Indicate whether each management feature manages or monitors a single system or multiple systems.

40. Refer to the exhibit.

You are configuring a pair of HPE 5945 switches into an IRF stack You have cabled the switches as depicted in the exhibit Into which IRF Ports should you place each switch interface?

A)

B)

C)

D)

41. A customer requests a quote for an HPE storage solution that meets these requirements

- fully redundant dual-controller storage array with no single points of failure

- 1 Gb or 10 Gb ISCSI connectivity

- at least four host-facing ISCSI ports

- capable of expanding usable capacity in small increments of one-to-two disks

Which HPE storage solution should be proposed?

42. DRAG DROP

You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration.

Drag the steps on the left Into their appropriate order in the answer area on the right.

43. HOTSPOT

You are configuring an MSA 2052 for one of your customers in OCA.

Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

44. What is a primary benefit of DAS?

45. DRAG DROP

A customer needs a new environment to support an ERP system.

The sizing information you received shows the following requirements:

- 3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity

- 10TB of high performance shared storage

- Cloud-based performance monitoring and analytics

The customer prefers rack mounted equipment.

Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

46. HPE Support asks you to generate an SSD wear gauge report for local storage on an HPE DL360 Gen10 server running VMware.

Which procedure will ensure that the server will boot directly into a maintenance state so you can generate the requested report?

47. You are validating a configuration prior to quoting it for the customer.

You plan to propose the following configuration:

- Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit

- HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit

- Two SN3000B FC Switches

Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?

48. A customer just purchased a ProLiant 300 series Gen10 server and wants to install the latest version of Windows.

Which feature of this server will assist the customer with the initial Windows installation?

49. A customer Has a data center with third-party routers and firewalls You are designing a new data center network switch architecture consisting of FlexFabric switching for the data network and ArubaOS-Switch switching for the out-of-band management network.

The customer needs a network management platform with the capabilities to manage and monitor the entire environment

Which management platform meets the customer requirements?

50. Which solution should you recommend to a customer for basic file and print services?