HomeCiscoCCNP Data Center350-601 Free Demo Questions (Part 2, Q41-Q80) V22.02: Updated Dumps for DCCOR Exam Preparation
June 20, 2026

350-601 Free Demo Questions (Part 2, Q41-Q80) V22.02: Updated Dumps for DCCOR Exam Preparation

DumpsBase has released the most updated 350-601 dumps (V22.02) to help you prepare for the Implementing and Operating Cisco Data Center Core Technologies (DCCOR) exam. Also, we have shared the 350-601 free demo questions (Part 1, Q1-Q40) to help you verify the V22.02 before. By readint these demo questions, you can find the latest 350-601 exam questions provide a reliable and efficient way to simplify your preparation. The 360-601 dumps (V22.02) with realistic questions and verified answers closely mirror the actual exam. Using these updated questions and answers significantly increases your chances of passing on the first try. Most candidates feedback that only 40 free demo questions are not enough to verify. Today, we will continue to share 40 more demo questions in Part 2. Read and check, and make sure that the most updated 350-601 dumps (V22.02) will help you understand exam patterns, reduce study stress, and improve confidence before test day.

Below are our 350-601 free demo questions (Part 2, Q41-Q80) V22.02, read online:

1. Refer to the exhibit.


An engineer logs all occurrences of a configuration being saved. The engineer must generate an additional log message when someone attempts to change the configuration for interface Ethernet 1/1.

Which set of commands must be used to meet these requirements?


2. Refer to the exhibit.





An engineer is configuring Cisco Data Center Network Manager to automate the provisioning of Cisco Nexus 9000 Series Switches. The engineer must configure user access for network engineers to permit device operations in Interface Manager. The solution must hide Admin and Config Menu items in Interface Manager.

Which two roles must be assigned to the network engineers to meet these requirements? (Choose two.)
3. A storage administrator notices an increasing number of storage targets that unexpectedly reach capacity, causing periodic service interruptions The administrator must now create and submit a daily report of the environment that shows the status of the storage targets with the highest capacities.

Which solution provides this information?
4. A network engineer must configure a Cisco MDS switch to use the local user database for console access if all AAA servers are unreachable.

Which configuration should be applied to complete this task?
5. DRAG DROP

Refer to the exhibit.


An administrator must complete the unified fabric configuration between Server1 and a pair of Cisco Nexus 9000 Series Switches Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the N9K-1 configuration Snippets are used more than once.


6. Which Cisco Nexus Dashboard service distributes Cisco ACI network configuration policies and templates to different data centers?
7. Refer to the exhibit.





A VXLAN data center fabric has three hosts mapped to three different VLANs. Ingress and egress VTEPs perform Layer 2 and Layer 3 lookups VLAN 100 is mapped to VNI 1010 on Lead.

Which set of actions allow communication between Host-1 and Host-2?
8. An engineer must implement Strict Unicast Reverse Path Forwarding mode for IPv4 packets on the Ethernet1/1 interface on the Cisco Nexus 9500 Series Switch.

Which configuration achieves this goal?

A)





B)





C)





D)



9. Refer to the exhibit.





Which value must be added to the LDAP provider to complete the LDAP group map configuration in Cisco UCS Manager?
10. An engineer is configuring a vHBA template in Cisco UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAU Traffic flows.

Which two resources must be specified in the vHBA template? (Choose two)
11. DRAG DROP

An engineer must configure remote authentication on a Cisco UCS system. The user password must be encrypted before it is sent to the authentication server. The company security policy requires the server to be based on an open standard.

Drag and drop the UCS CLI AAA configuration commands from the left into the order in which they must be implemented on the right. Not all commands are used.


12. An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch.

The solution must meet these conditions:

✑ It must use a challenge-response authentication protocol that uses MD5 hashing with an incrementally changing identifier

✑ The RADIUS configuration must t>e automatically shared with other MDS switches in the environment.

The RADIUS server is already defined.

Which command set completes the configuration?



13. DRAG DROP

All logins to a Cisco Nexus 9000 Series Switch must pass through the TACACS+ server at IP address 192.168.10.10.

The configuration must meet these requirements:

• The TACACS+ server must be used for SSH and Telnet.

• The TACACS+ server key must be Cisco123!.

• Management VRF must be used for connectivity.

• The deployment must fail back to local credentials if the TACACS+ server fails to respond within 30 seconds.

Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the configuration. Not all code snippets are used.


14. A network engineer must roll back a configuration change made on a Cisco Nexus 9300 Series Switch. Before the change, the network engineer created a checkpoint named pre-config. The rollback abort if any errors occur.

Which command must be used to accomplish these objectives?



15. Which nonproprietary protocol is used to access a NAS device?
16. Refer to the exhibit.





An engineer configures FCoE in a newly installed data center.

Which configuration must be applied to activate VSAN 100 on VFC 100?
17. Which two configuration settings are available in the in the cisco UCS firmware Auto sync server policy?
18. DRAG DROP

An engineer must configure HSRP protocol on two cisco nexus 9000 series switches running a virtual port channel in addition, the HSRP implementation must meet these requirements:

- It must allow more than 500 groups

- switch1 must act as the primary Switch

- Both switches must use a user defined hardware address

Drag and drop the commands from the right to complete a configuration of the HSRP on the left. The commands are used more than once. Not all commands are used



19. A Cisco UCS C-Series server needs to be installed in a data center. The server must be managed by using Cisco UCS Manager with a single cable for management and data traffic.

Which set of commands must be run on the server after a physical connection is established?

A)





B)





C)





D)



20. An engineer must configure OSPFv2 connectivity between a pair of Cisco Nexus switches.

The connection between the switches must meet these requirements:

✑ Use unicast for updates.

✑ Use decentralized communication of updates.

✑ Full adjacency between switches.

Which configuration is needed to meet these requirements?
21. An engineer modifies the virtual port channel domain on a Cisco Nexus 9000 Series Switch using Session Manager.

Which two commands must the engineer use to confirm the configuration is valid and apply the configuration to the switch? (Choose two.)
22. An engineer requires a solution to automate the configuration and deployment of remote network devices for a customer. The engineer must keep these considerations in mind. The customer's environment is based on industry-accepted standards and requires a solution that meets these standards.

The security requirements mandate the use of a secure transport mechanism between the automation software and target devices such as SSH or TLS.

The solution must be implemented using a human-readable language and provide the functionality to format data in XML or JSON.

Which solution must be used to meet these requirements?
23. An engineer must implement a set of changes in a Cisco Nexus 9000 Series Switch so that:





Which set of actions meets these requirements?

A)





B)





C)





D)



24. An engineer builds a new Cisco ACI fabric.

Which VLAN must be configured as the infrastructure VLAN during the Cisco APIC setup script?
25. A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature.

Which component is upgraded during the infrastructure firmware upgrade stage?
26. An engineer configures a storage environment for a customer with high- security standards. The secure environment is configured in vsan 50. The customer wants to maintain a configuration and active databases and prevent unauthorized switches from joining the fabric. Additionally, the switches must prevent rogue devices from connecting to their ports by automatically learning the WWPNs of the ports connected to them for the first time.

Which two configuration sets must be used to meet these requirements? (Chose two.)
27. Refer to the exhibit





An engineer must restrict users assigned to the sangroup role on the Cisco MDS 9000 Series Switch from issuing commands on VSANs 15 to 20.

Which command must the engineer run to achieve this objective?
28. An engineer must create a PowerShell script that leverages the Cisco UCS Manager PowerShell module to submit automated requests to Cisco UCS Manager The engineer must automate the removal of switches from VLANs Environment variadlos must provido the VLAN name and switch identifiers. The VLAN must persist when it is removed from tho switch port.

Which command must the engineer include in the script to accomplish these goals?



29. DRAG DROP

Refer to the exhibit.


Drag and drop the code snippets from the bottom onto the blanks in the code to complete the JSON request that implements the ACL presented. Not all code snippets are used.


30. An engineer performs a Cisco UCS C480 ML M5 installation from a Cisco UCS Manager As a part of the design the server must perform an iSCSI bool from the storage array.

Which configuration must be performed in the SAN settings in the root organization to satisfy that condition?
31. An engineer must optimize ARP responses and reduce unnecessary ARP broadcasts over the VXLAN/EVPN fabric.

Which action accomplishes these tasks?
32. Refer to the exhibit.





During a vPC peer switch reload, there is packet loss between the server and the router.

Which action must be taken to prevent this behavior during future reloads?
33. A DevOps engineer must design a solution to push network configurations across a company infrastructure to ensure consistency. The solution must be easy to configure and manage and must support Python and YAML.

Which configuration management tool meets these requirements?
34. An engineer configures a role for a new user in Cisco UCS Manager The role should allow the user to configure vHBAs, vNICs, and server port types.

Which role should be assigned to allow the engineer to complete this task?
35. Which two statements describe the process of upgrading an EPLD on a Cisco MUS 9000 Series Switch? (Choose two)
36. An engineer must analyze packets arriving from a server port on a Cisco Nexus 9000 Series Switch. The packet sniffer is located on a different switch from the one the server is currently connected to.

The packet capture must meet these requirements:

- It must capture all incoming packets on the switch port.

- It must capture the first 1000 bytes of the packet to conserve bandwidth.

Which action must be taken to meet these requirements?
37. Refer to the exhibit.





The network management system that is located at 192.168.10.10 and port 2000 must receive traps from the Cisco UCS Manager called UCSM. The community name is Cisco123! and the SNMP version must be the most secure.

These two commands have already been configured on Cisco UCSM.

UCS-A# scope monitoring

UCS-A/monitoring # enable snmp

Which command set completes the SNMP configure



38. Refer to the exhibit.





A network engineer is using tcpdump to capture a snapshot of OSPF-related traffic on a specific Cisco NX-OS switch port. For security reasons, the capture must be taken using an embedded container that is already deployed on the Cisco Nexus device.

Which command completes the script?
39. Refer to the exhibit.





A network engineer must monitor the traffic from the server on VLAN 80.

All source traffic from the server must be captured on the monitoring device.

Which configuration set meets these requirements?



40. Refer to the exhibit.





VSAN 2077 has been configured as the primary path.

Which configuration must be implemented to allow the Cisco UCS system to enable zoning while the device neighbor allows communication using port FC1/24 to the servers?

 

Updated 300-410 Dumps (V32.02) with 43 Q&As: Pass Your Exam with Confidence
Tags:,

Related Posts

About The Author

dumps

From our dumpsbase platform you could search what exams you need then test or practice online by yourself. Download the PDF file if you need directly. Any other questions you can mail [email protected]

Add a Comment

Your email address will not be published. Required fields are marked *