300-110 Exam Dumps V8.02 with 35 Free WLSD Practice Questions

Prepare for the Designing Cisco Wireless Networks (300-110 WLSD) exam using DumpsBase’s 300-110 exam dumps V8.02 for 2026. Cisco 300-110 dumps contain a broad range of questions covering both fundamental concepts and advanced enterprise scenarios. With 35 free practice questions, you will find that the latest 300-110 exam dumps V8.02 are reliable, helping you track your progress and showing how much your design skills have improved over time.

Essential 300-110 Exam Information

Understanding the structure of your Designing Cisco Wireless Networks (300-110 WLSD) exam is the first step toward success. Here are the core details:

• Exam Title: Designing Cisco Wireless Networks (WLSD)
• Exam Code: 300-110
• Certification Provider: Cisco (CCNP Wireless Track)
• Free Updates: One Year
• Language: English, Japanese

To help you prepare for the Cisco 300-110 exam, we have 94 expert-verified exam questions to help you grasp how Cisco presents concepts, moving far beyond simple definition memorization.

How to Confirm DumpsBase is Reliable? – 35 Free Practice Questions Are Available

You will have 35 free practice questions online to help you confirm that DumpsBase is a reliable platfrom to make preparations. These demo questions cover key topics for the Designing Cisco Wireless Networks v1.2 exam, including wireless site surveys, wired and wireless infrastructure, mobility, and WLAN high availability. They help you understand practical wireless design scenarios and make sure that 300-110 dumps V8.02 are worth downloading.

1. An educational organization recently deployed an anchored WLAN and has a high number of client connections at any given time that stream video. The wireless infrastructure includes two Cisco 9800 WLCs. To prevent web traffic being slow, an engineer must configure the deployment to prevent excessive fragmentation of the client data.

Which configuration must the engineer apply?

Set the MTU on both controllers to match.

Increase the MTU on both controllers.

Adjust the TCP MSS value below the fragmentation point.

Set the do not fragment bit on the mobility tunnel.

2. Which issue occurs when wireless access points transmit by using the highest power level in a building that has brick walls?

hidden node

wideband interference

reflection

narrowband interference

3. An engineer must identify the network requirements for a company that has a main office and 10 branch offices. The network must be able to support data, voice, video, and location tracking.

Which two factors must be considered? (Choose two.)

security policy of the company for building access

number of wireless devices that require access

type of site for which the survey will be performed

business type of the company

available power sockets in the IT room

4. A university wants to deploy a high density of APs in an area where a high number of users congregate.

Which functionality allows the university to optimize the RF settings for APs that operate in different environments or coverage zones?

AP groups

RF groups

AP profiles

RF profiles

5. A customer is migrating from a legacy Cisco AireOS WLC to a new Cisco 9800 IOS XE WLC with Cisco 9100 APs. The new APs must associate to the Catalyst 9800 WLC, and wireless clients must seamlessly roam between the old and new WLCs even during SSO. The new Catalyst 9800 WLC deployment is configured to use SSO.

Which command must be added to meet the requirements?

C9800# chassis redundancy ha-interface local-ip <local IP> subnet <local IP subnet> remoteip <remote>

C9800(config)# ip default-gateway <IP>

C9800# wireless mobility mac-address <MAC>

C9800(config)# management gateway-failover enable

6. A wireless engineer must design a backhaul link. The engineer has a mesh access point that has a wired connection back to the infrastructure.

What must be changed in the AP role before a change is made in the AP mode?

monitor

RAP

bridge

local

7. A customer designs a Cisco wireless environment to provide connectivity to employees and guests. The guest SSID must be configured on three anchor WLCs named Anchor1, Anchor2, and Anchor3 in a DMZ. The guest anchor priority must be configured to ensure that Anchor1 has the highest priority.

Which priority level must be incorporated in the design for Anchor1?

0

1

2

3

8. An engineer must design AP placements for a new branch office that contains two floors . The engineer uses Ekahau to complete the predictive survey .

To calculate the signal bleed through between floors, the engineer creates a building, adds the floors, and attenuation areas .

After the scale is set, what else must be added on the floors to accurately measure the signal bleed at a specific location?

Draw in coverage areas.

Start the auto planner.

Add alignment points.

Choose the access point models.

9. A university has three campus locations and the main data center. Each campus location has a Cisco Catalyst 9800-40 WLC that manages 600 APs. The data center has a Catalyst 9800-40 WLC, which serves as N+1 backup for each campus WLC. A consulting engineer must install four additional Catalyst 9800-40 WLCs to serve as high availability SSO pairs for each campus, but only two have been approved due to budget restrictions. Requirements: Data center WLC must always be available as N+1 backup, Campus1 WLC must operate with zero downtime, and in the event of multiple campus outages, the AP priority order is to support Campus3, Campus2, then Campus1.

Which design approach must the consulting engineer take?

The data center WLC and Campus3 WLC are the high availability SSO pair. Campus1 APs have priority 4, Campus2 APs have priority 2, and Campus3 APs have priority 1.

The data center WLC and Campus1 WLC are the high availability SSO pair. Campus1 APs have priority 4, Campus2 APs have priority 2, and Campus3 APs have priority 1.

The data center WLC and Campus1 WLC are the high availability SSO pair. Campus3 APs have priority 4, Campus2 APs have priority 2, and Campus1 APs have priority 1.

The data center WLC and Campus3 WLC are the high availability SSO pair. Campus3 APs have priority 4, Campus2 APs have priority 2, and Campus1 APs have priority 1.

10. An enterprise network is deploying two Cisco Catalyst 9800 WLCs in a data center to ensure uninterrupted wireless services for a campus with thousands of users. The IT management requests a design that enables seamless failover without client reauthentication or loss of connectivity if one controller fails. Ease of configuration and ongoing management are high priorities. The controllers will be connected via a high-speed LAN segment, and both must support full active-passive redundancy for all managed APs.

Which design approach meets the requirements?

Configure the 9800 WLCs in separate mobility groups and synchronize configurations manually.

Implement SSO with redundancy management interface and AP SSO enabled between the two controllers.

Deploy the controllers with VRRP to provide gateway redundancy and manually synchronize WLAN profiles.

Enable N+1 redundancy, assigning primary and secondary controllers to each AP, and use DHCP for failover.

11. A network engineer is designing a new wireless network for a campus. The network must include optimized performance, avoid interference, availability in high-density areas, and roaming.

Which two approaches must be taken? (Choose two.)

5 GHz frequency band with 20 MHz channels

2.4 GHz frequency band with 20 MHz channels

5 GHz frequency band with 80 MHz channels

2.4 GHz frequency band with 40 MHz channels

5 GHz frequency band with 40 MHz channels

12. A consulting engineer for a copper mine is trying to extend the network connectivity of autonomous trucks via Cisco IW3702 APs. The WGB design requirements include: latency-sensitive application (truck slows at 10 sec, stops at 20 sec of connection loss), aggressive scanning and roaming, enterprise-grade security without certificates on each AP, multiple clients in different VLANs on the WGB, and channel scan parameters restricted to only channels in the truck path.

Which design approach meets the requirements?

WGB in mobile station mode with EAP Fast connected to a dot1q-capable switch

WGB in mobile station mode with EAP-TLS connected to a dot1q-capable switch

WGB in static mode with EAP Fast connected to a dot1q-capable switch

WGB in static mode with EAP-TLS connected to a dot1q-capable switch

13. A university lecture hall has a Cisco wireless high-density network with this configuration:

• 5 GHz only

• 20-MHz channels

• UNII-1, UNII-2, and UNII-2E channels

• TPC minimum = 8

• TPC maximum = 14

The lecture hall is 200 feet by 100 feet and has 16 Cisco APs that use directional antennas.

Which feature must be included in the design to mitigate and reduce high-channel utilization from rogue APs?

band select

802.11w

RxSOP

DFS detection

14. A customer has multiple WLCs running in N+1 redundancy with APs load balanced between the WLCs. The customer performs AP failover testing between the WLCs and notices that some of the APs do not move back to their primary WLC after it recovers.

What are two points that must be addressed in the design? (Choose two.)

DHCP Option 43 information is incorrect.

APs do not have their secondary WLC information configured correctly.

AP Fallback is not enabled on one of the WLCs.

APs do not have their primary WLC information configured correctly.

APs failover priorities are set to Low.

15. An engineer is designing a high-density WLAN that must support 100 concurrent users with 100 Mbps throughput consistently. The design allows for 20 Mbps per cell and per channel on the 5 GHz band.

How many channels must the design use to provide 1 Mbps per user prior to RF overhead?

5

10

15

20

16. A customer has a Cisco wireless network that supports VoWLAN services. The customer wants supported voice clients to receive roaming recommendations and suggestions from APs. This functionality must not impact non-VoWLAN clients.

What should be enabled on the VoWLAN SSID?

802.11k neighbor lists

CCKM with 802.1X

802.11v BSS Transition Management

802.11r Fast Transition

17. A network engineer must review the design for a Cisco wireless deployment at a hospital. The deployment will have two Cisco 9800 WLCs configured with SSO, one Cisco 9800 WLC joined to the SSO controllers using a mobility tunnel, and one Cisco 9800 WLC that will be used as a service/dev controller and not joined using a mobility tunnel.

Which high availability option must be incorporated in the design to ensure that APs choose the service/dev controller last when trying to associate?

primary

tertiary

secondary

AP failover priority

18. Which profile is included within a site tag when configured in a Cisco 9800 WLC architecture?

QoS

NAT

Flex

VLAN

19. Users who leave the office with a wireless headset must be able to hand oft the voice call with minimal disruption .

The engineer drafted four possible Door plans for AP placement:

• red dots and arrows represent the direction of travel

• blue dots represent the AP placements

Which floor plan provides the requested functionality?

A)





B)





C)





D)

Floor plan A

Floor plan B

Floor plan C

Floor plan D

20. A consulting engineer is preparing to survey a brownfield deployment for a 6000-sqft building with four floors that have APs. The entire building is being remodeled and the furniture, office walls, and decoration are being updated. The engineer must perform a survey analysis on the potential RF impact of newer furniture materials.

How must the survey be conducted?

Perform a sweep analysis first to predict the signal strength across each point in a floor.

Evaluate the neighbor APs strength and density based on the radio statistics information of each A

Measure upstream and downstream data rates based on the remodeling of the building.

Use a survey tool with the existing AP positions using building floor maps and material configuration.

21. Refer to the exhibit.





Exhibit ― Q15: Ekahau SNR Heatmap ― Post-Deployment Survey Output

A wireless engineer is using the Ekahau Site Survey tool to conduct a post-deployment survey. The engineer analyzes the pictured output to determine if SNR meets the voice requirements.

How is the voice support based on the output?

It works in the top-middle room.

It is not supported.

It works in the lobby.

It works in all locations.

22. A small customer has a legacy autonomous mode Wi-Fi deployment that provides a low-density and low-capacity service. The customer wants to update and replace this deployment with the latest Wi-Fi technology but has a fixed budget that will pay only to replace the APs.

Which architectural controller deployment model suits this requirement?

embedded

unified

fabric

cloud

23. During a site survey for a new wireless deployment in a multifloor office building, an engineer must identify sources of interference and ensure optimal AP placement for 5 GHz coverage. While walking the site with a spectrum analyzer, the engineer notices periodic spikes in the noise floor on several channels and inconsistent signal strengths reported by the survey tool, despite visually unobstructed paths.

Which action must the engineer take next to accurately assess and mitigate the Layer 1 interference?

Increase the transmit power of all APs to compensate for the signal fluctuations and re-run the survey to verify the visual line-of-sight and signal strength measurements.

Use the wireless controller monitoring tools in combination with the site survey tool heatmap output to determine AP locations and capture the Layer 1 spectrum analysis for ongoing analysis.

Document the affected channels and locations, then attempt to adjust the channel plan to avoid the frequencies that experience the most interference during initial deployment.

Use the spectrum analyzer to document the time, frequency, and location of the noise spikes, then correlate them with possible non-Wi-Fi interferers and adjust AP placement accordingly.

24. A customer is building a new warehouse facility that has only its foundation and perimeter walls built. The building will be complete in the next eight months. The customer needs a detailed bill of materials and costs for a wireless network that must support RF scanners throughout the warehouse.

How should the survey be performed?

Perform a passive survey by simulating the wireless propagation using modeled attenuation areas on a digital floor plan.

Perform a predictive survey of the existing building and simulate the future attenuation objects using a passive survey.

Perform a passive survey of the existing building and simulate the future attenuation objects using a predictive survey.

Perform a predictive survey by simulating the wireless propagation using modeled attenuation areas on a digital floor plan.

25. An engineer is designing a wireless solution for a corporate campus which includes two primary buildings: Research and Operations. The design must ensure seamless mobility for employees moving between buildings, support uninterrupted connectivity for real-time applications, and facilitate efficient Layer 2 and Layer 3 roaming. Each building's 9800-80 WLC manages its local APs, and the solution must support 802.11r/k/v while maintaining an effective mobility control plane.

Which design approach leverages Cisco mobility group architecture to meet the requirements?

Designate the Research building's WLC as the primary controller and the Operations building's WLC as a secondary controller within a single mobility group to centralize mobility management.

Assign each 9800-80 WLC to separate mobility groups, one for each building, to isolate traffic and mitigate the risk of overloading a single mobility group.

Establish the Operations building's WLC as an anchor controller, configuring the Research building's WLC to tunnel all client traffic to it for centralized traffic management.

Add both 9800-80 WLCs in a single mobility group with no specific roles assigned, enabling peer-to-peer coordination for seamless roaming across buildings.

26. What happens to an AP when a flex profile name is changed in a site tag?

It automatically updates its firmware without causing any downtime.

It temporarily disables all the currently broadcasting SSIDs.

It switches to a backup controller without any interruption.

It is forced to rejoin the controller by disconnecting the DTLS session.

27. An engineer in a branch office that does not have a wired backhaul must ensure that local clients can be switched locally and authenticated centrally .

In which mode must the AP be configured?

MAP

Flex+Bridge

RAP

Cisco FlexConnect

28. A customer wants a network engineer to design a Cisco wireless solution that will have redundancy through SSO and LAG. APs in the executive office must reassociate to the WLC as soon as possible in the event of a failure. The WLCs are located in a remote data center. The head office uses a WAN for connectivity with the data center.

Which priority must be incorporated in the design to be assigned to the executive APs?

high

medium

low

critical

29. An engineer configured the optimized client roaming on Cisco WLC with an RSSI threshold of -72 dBm. Clients report frequent disconnections.

What must be configured for the AP to guide the client to a better AP?

Enable BSS transition on the SSID and optimized roaming at the radio level.

Disable coverage hole detection on the SSID and enable BSS transition on the SSI

Enable BSS transition at the radio level and optimized roaming on the SSI

Disable optimized roaming and enable 802.11v support on the SSI

30. A wireless engineer must design a WLAN for a university that requires outdoor Wi-Fi access.

Which obstruction has the greatest effect on wireless signal propagation?

wind

rain

trees

poles

31. An engineer is using Ekahau Site Survey to create a WLAN plan for a warehouse. The plan is to use patch antennas.

Which setting is adjusted when simulated APs are placed on the map?

AP channel

Wi-Fi technology

antenna downtilt

AP transmission power

32. Which strategies must the engineer use for the antenna deployment model in a warehouse?

ceiling-mounted, directional antennas

wall-mounted, low-gain, omnidirectional antennas

ceiling-mounted, high-gain, omnidirectional antennas

wall-mounted, patch directional antennas

33. A retail customer opened two new branch locations, and the main store HQ handles data center operations. Each branch location has three Cisco Catalyst 9130 APs. The data center has a Catalyst 9800 WLC with 18 Catalyst 9130 APs. Growing business and poor WAN uplinks cause impacted branch AP and wireless client connectivity back to HQ, and each branch location is now planned to have its own EWC controller based on C9130 AP to keep traffic local. This new design must accommodate: guests and employees sharing the same WLAN with different VLANs, guest uplink and downlink traffic restricted to 2 Mbps, and each branch acting as secondary or tertiary backup to another branch with the data center WLC always being the primary.

Which design approach should the consulting engineer take?

Two C9130 branch APs must be converted to EWC mode, one for the active controller and the other for standby, with HQ WLC set as a primary N+1 backup, and other branches' EWC must be added as mobility peers. The branch WLAN will use the guest anchor to HQ WLC for guest VLAN access.

One C9130 branch AP must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC set as a primary N+1 backup and other branches' EWC AP as secondary and tertiary. HQ AAA must be added to EWC, and WLAN with MAB + AAA override must be configured.

Two C9130 branch APs must be converted to EWC mode, one for the active controller and the other for standby, with the standby EWC set as N+1 backup. HQ AAA must be added to EWC, and WLAN with dot1x + AAA override must be configured.

One C9130 branch AP must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC set as N+1 backup. The branch guest WLAN will use local web auth on guest VLA

34. A company has three Cisco WLCs that are joined as a mobility group. Mobility multicast messaging is enabled. All the WLCs in the mobility group communicate via a multicast.

Which configuration must be identical between the three WLCs to validate communication?

service port IP address

interface IDs

management IP address

multicast IP address

35. An engineer is deploying new APs to serve IEEE 802.11g through 802.11ac clients and wants to use the Ekahau Site Survey tool to verify RF coverage. Management wants the engineer to verify and create coverage maps as quickly as possible.

Which configuration accomplishes the goal?

passive mode with one wireless adapter

active mode with two wireless adapters

active mode with one wireless adapter

passive mode with two wireless adapters

 Loading...

 

Why DumpsBase Assists with CCNP Wireless 300-110 Exam Preparation

Selecting the right source for your study materials is just as important as the effort you put into preparation. From these free demo questions, you can find that the latest 300-110 exam dumps V8.02 from DumpsBase are carefully expert-verified that reflect the most current exam patterns and requirements. Instead of outdated or irrelevant questions, you receive high-quality exam questions and answers that matches the actual exam structure. This reliability allows you to study with absolute confidence, knowing that your efforts are well directed toward passing the Designing Cisco Wireless Networks (300-110 WLSD) exam.