NSE6_SDW_AD-7.6 Dumps (V10.03) Are the Most Updated Resource for 2026 Preparation: Check DumpsBase NSE6_SDW_AD-7.6 Free Dumps (Part 1, Q1-Q40) First

If you are searching for reliable and up-to-date NSE6_SDW_AD-7.6 study materials to prepare for your Fortinet NSE 6 – SD-WAN 7.6 Enterprise Administrator exam, come to DumpsBase and download the NSE6_SDW_AD-7.6 dumps (V10.03). This is the most updated resource, providing a complete and effective solution to help you validate your skills and boost your confidence for the real exam. We have updated 257 exam questions in V10.03, which have been verified by certified professionals. They are designed to give you a real-world understanding of the Fortinet NSE 6 – SD-WAN 7.6 Enterprise Administrator topics. Going through these comprehensive dumps allows you to develop a deep knowledge of the syllabus without feeling overwhelmed. They serve as an excellent self-assessment tool, helping you identify your strengths and areas that need more focus before exam day. By using the updated NSE6_SDW_AD-7.6 dumps (V10.03), you gain hands-on familiarity with the technologies and scenarios covered in the test, significantly increasing your chances of passing on the first attempt.

We have NSE6_SDW_AD-7.6 free dumps (Part 1, Q1-Q40) of V10.03 below to help you check the updated version:

1. What is the purpose of configuring a basic SD-WAN DIA setup?

To configure virtual networks

To configure quality of service (QoS)

To configure security policies

To configure WAN optimization

2. Refer to the exhibit.





Based on the exhibit, which action does FortiGate take?

FortiGate bounces port5 after it detects all SD-WAN members as dead.

FortiGate fails over to the secondary device after it detects all SD-WAN members as dead.

FortiGate brings up port5 after it detects all SD-WAN members as alive.

FortiGate brings down port5 after it detects all SD-WAN members as dead.

3. Which two interfaces are considered overlay links? (Choose two.)

LAG

IPsec

Physical

GRE

4. Refer to the exhibit.





When attempting to establish an IPsec tunnel to FortiGate, all remote users match the FIRST_VPN IPsec VPN. This includes remote users that want to connect to the SECOND_VPN IPsec VPN.

Which two configuration changes must you make on both IPsec VPNs so that remote users can connect to their intended IPsec VPN? (Choose two.)

Configure different proposals.

Configure a unique peer I

Change the IKE mode to aggressive.

Configure different Diffie Hellman groups.

5. Which CLI command do you use to perform real-time troubleshooting for ADVPN negotiation?

diagnose debug application ike

diagnose sys virtual-wan-link service

get ipsec tunnel list

get router info routing-table

6. Refer to Exhibit:





Based on the exhibit, which algorithm does SD-WAN use to distribute traffic that does not match any of the SD-WAN rules, among the member interfaces?

All traffic from a source IP to a destination IP is sent to the least used interface.

All traffic from a source IP is sent to the same interface.

All traffic from a source IP to a destination IP Is sent to the same interface.

All traffic from a source IP Is sent to the most used Interface.

7. Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two.)

It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links.

It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance.

It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub.

It provides direct connectivity between all sites by creating on-demand tunnels between spokes.

8. Refer to exhibits









Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.

Based on the FortiGate configuration shown in the exhibits, what are two issues you might encounter when creating an SD-WAN interface on port1 and port2? (Choose two)

Member interface that have IP address of 0.0.0.0/0.0.0.0

Member interfaces that are referenced by any other configuration element

Member interfaces that are administratively down

Member interfaces that are physical interfaces as well as VLAN aggregate, and iPsec interfaces

9. Which three protocols can be used for the status check in a performance SLA? (Choose three.)

SSH

DNS

traceroute

TWAMP

HTTP

10. Which components make up the secure SD-WAN solution?

FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy

Application, antivirus, and URL, and SSL inspection

Datacenter, branch offices, and public cloud

Telephone, ISDN, and telecom network

11. What are two reasons why it is effective to implement the internet service database (ISDB) in an SD-WAN rule? (Choose two)

The ISDB contains the IP addresses and port ranges of well-known destinations

The ISDB requires application control to maintain signatures and perform load-balancing

The ISDB applies rules to traffic from specific sources, based on application type

The ISDB is dynamically updated and reduces administrative overhead.

The ISDB covers the SDN dynamic connectors private and public addresses

12. Which action FortiGate performs on traffic that is subject to a per-IP traffic shaper of 10 Mbps?

FortiGate guarantees a minimum of 10 Mbps of bandwidth to each source IP address.

FortiGate applies traffic shaping to the original traffic direction only.

FortiGate limits each source IP address to a maximum bandwidth of 10 Mbps.

FortiGate shares 10 Mbps of bandwidth equally among all source IP addresses.

13. You are configuring SD-WAN zones and members on a FortiGate device.

Which two facts should you take into account? (Choose two.)

The default zone is sdw-default

The default zone is virtual-wan-link.

You can add any physical interface to a zone.

You can add only SD-WAN members to a zone.

14. Which three matching traffic criteria are available in SD-WAN rules? (Choose three.)

Type of physical link connection

Internet service database (ISDB) address object

Source and destination IP address

URL categories

Application signatures

15. Refer to the exhibit.





The exhibit shows the SD-WAN rule status and configuration.

Based on the exhibit, which change in the measured packet loss will make T_INET_1_0 the new preferred member?

When all three members have the same packet loss.

When T_INET_0_0 has 4% packet loss.

When T_INET_0_0 has 12% packet loss.

When T_INET_1_0 has 4% packet loss.

16. What is the main benefit of using FortiManager for SD-WAN deployment management?

Simplified configuration and management

Improved security

Increased application performance

Better network connectivity

17. What is the purpose of deploying ADVPN in a hub-and-spoke IPsec topology for SD-WAN?

To ensure secure communication between sites

To improve application performance

To simplify configuration and management

To provide high-speed internet connectivity

18. Which two statements correctly describe what happens when traffic matches the implicit SD-WAN rule? (Choose two.)

The session information output displays no SD-WAN service I

FortiGate flags the session with sdw-imp.

The traffic is distributed through only static routes or directly connected routes.

By default, FortiGate load balance the traffic according to the source IP address.

19. What is the purpose of using dynamic routing protocols in a hub-and-spoke IPsec topology for SD-WAN and ADVPN?

To ensure secure communication between sites

To improve application performance

To simplify configuration and management

To provide high-speed internet connectivity

20. Refer to the exhibit.









How does FortiGate handle the traffic with the source IP address 10.0.1.27 and the destination IP address 128.66.0.111?

FortiGate steers the traffic through port1.

FortiGate drops the traffic flow.

FortiGate steers the traffic through port2.

FortiGate routes the traffic flow according to the forwarding information base (FIB), to either port1 or port2.

21. Which SD-WAN deployment model allows for a mix of private and public connectivity?

Hybrid SD-WAN

Internet-only SD-WAN

Cloud-delivered SD-WAN

On-premises SD-WAN

22. Which three parameters are available to configure SD-WAN rules? (Choose three.)

Application signatures

Incoming interface

Internet service database (ISDB) address object

Source and destination IP address

Type of physical link connection

23. Refer to the exhibit.





Which are two expected behaviors of the traffic that matches the traffic shaper? (Choose two.)

The number of simultaneous connections among all source IP addresses can exceed 5 connections.

The traffic shaper limits the combined bandwidth of all connections to a maximum of 5 MB/sec.

The number of simultaneous connections allowed for each source IP address can exceed 5 connections.

The traffic shaper limits the bandwidth of each source IP address to a maximum of 625 KB/sec.

24. What is the most common cause of SD-WAN connectivity issues?

Firewall configuration errors

Misconfigured routing protocols

Network congestion

Software bugs

25. Which two statements about SD-WAN zones are true? (Choose two.)

You are allowed to create static routes that reference an SD-WAN zone.

After you add an interface to SD-WAN as member, you must use zones to reference the member in firewall policies.

You must configure the SD-WAN zone with a minimum of two members.

You can configure only one SD-WAN zone per VDO

26. Refer to exhibits.









Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy. The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is not being evaluated by the shaping policy.

Based on the exhibits, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic?

The guaranteed-10mbps option must be selected as the per-IP shaper option.

The guaranteed-10mbps option must be selected as the reverse shaper option.

A new firewall policy must be created and SD-WAN must be selected as the incoming interface.

The reverse shaper option must be enabled and a traffic shaper must be selected.

27. What is the purpose of configuring SD-WAN path control?

To configure routing protocols

To configure security policies

To configure application performance monitoring

To ensure traffic takes the most optimal path

28. What is the route-tag setting in an SD-WAN rule used for?

To indicate the routes for health check probes.

To indicate the destination of a rule based on learned BGP prefixes.

To indicate the routes that can be used for routing SD-WAN traffic.

To indicate the members that can be used to route SD-WAN traffic.

29. Which SD-WAN traffic shaping technique prioritizes critical applications and limits bandwidth for non-critical applications?

Quality of Service (QoS)

Link steering

Application steering

Load balancing

30. Refer to the exhibit.





An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over T_INET_0_0. However, the traffic is routed over T_INET_1_0.

Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)

The traffic matches a regular policy route configured with T_INET_1_0 as the outgoing device.

T_INET_1_0 has a lower route priority value (higher priority) than T_INET_0_0.

T_INET_0_0 does not have a valid route to the destination.

T_INET_1_0 has a higher member configuration priority than T_INET_0_0.

31. What is the purpose of configuring SD-WAN Members and Performance SLAs?

To configure routing protocols

To configure security policies

To configure application performance monitoring

To configure VPN connectivity

32. Which feature of FortiManager allows for the creation of custom templates for SD-WAN devices?

Device Manager

Policy Manager

Template Manager

Configuration Manager

33. Which statement is correct about SD-WAN and ADVPN?

Routes for ADVPN shortcuts must be manually configured.

SD-WAN does not monitor the health and performance of ADVPN shortcuts.

You must use OSP

SD-WAN can steer traffic to ADVPN shortcuts established over IPsec overlays configured as SD-WAN members.

34. Refer to the exhibit.





Based on the output, which two conclusions are true? (Choose two.)

The all_rules rule represents the implicit SD-WAN rule.

There is more than one SD-WAN rule configured.

Entry 1 (id=1) is a regular policy route.

The SD-WAN rules takes precedence over regular policy routes.

35. What does forward error correction do?

It generates parity packets with redundant data.

It reorders packets at the destination.

It buffers packets and transmits them at the appropriate speed.

It sends the same packets across multiple links.

36. Which diagnostic command can you use to show the SD-WAN rules interface information and state?

diagnose sys virtual-wan-link route-tag-list.

diagnose sys virtual-wan-link service.

diagnose sys virtual-wan-link member.

diagnose sys virtual-wan-link neighbor.

37. Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?

The 10 Mbps bandwidth is shared equally among the IP addresses.

Each IP is guaranteed a minimum 10 Mbps of bandwidth.

FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.

A single user uses the allocated bandwidth divided by total number of users.

38. Refer to the exhibit.





FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.

Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)

Specify a unique peer ID for each dial-up VPN interface.

Different proposals are used between the interfaces.

Configure the IKE mode to be aggressive mode.

Use unique Diffie Hellman groups on each VPN interface.

39. What is the purpose of using FortiManager with FortiDeploy for SD-WAN management?

To automate configuration deployment

To centralize configuration and management

To configure security policies

To ensure efficient use of available bandwidth

40. Which are three key routing principles in SD-WAN? (Choose three.)

FortiGate performs route lookups for new sessions only.

Regular policy routes have precedence over SD-WAN rules.

SD-WAN rules have precedence over ISDB routes.

By default, SD-WAN members are skipped if they do not have a valid route to the destination.

By default, SD-WAN rules are skipped if the best route to the destination is not an SD-WAN member.

 Loading...