Updated 300-415 Dumps (V25.02) with Authentic Exam Questions and Answers: Start Reading 300-415 Free Dumps (Part 1, Q1-Q40)

1. Which component of the Cisco SD-WAN control plane architecture facilitates the storage of certificates and configurations for network components?

2. A bank is looking for improved customer experience for applications and reduce overhead related to compliance and security.

Which key feature or features of the Cisco SD-WAN solution will help the bank to achieve their goals?

3. A voice packet requires a latency of 50 msec.

Which policy is configured to ensure that a voice packet is always sent on the link with less than a 50 msec delay?

4. Which template configures the out-of-band management VPN?

A)

B)

C)

D)

5. An administrator must configure an ACL for traffic coming in from the service-side VPN on a specific WAN device with circuit ID 391897770.

Which policy must be used to configure this ACL?

6. A network administrator is bringing up one WAN Edge for branch connectivity.

Which types of tunnels form when the WAN edge router connects to the SD-WAN fabric?

7. Which pathway under Monitor > Network > Select Device is used to verify service insertion configuration?

8. On which device is a service FW address configured to Insert firewall service at the hub?

9. Which two algorithms authenticate a user when configuring SNMPv3 monitoring on a WAN Edge router? (Choose two)

10. An engineer is tasked to improve throughput for connection-oriented traffic by decreasing round-trip latency.

Which configuration will achieve this goal?

11. What is the purpose of ‘’vpn 0’’ in the configuration template when onboarding a WAN edge node?

12. Refer to the exhibit.

The tunnel interface configuration on both WAN Edge routers is:

Which configuration for WAN Edge routers will connect to the Internet?

13. Which component of the Cisco SD-WAN secure extensible network provides a single pane of glass approach to network monitoring and configuration?

14. When a WAN Edge device joins the SD-WAN overlay, which Cisco SD-WAN components orchestrates the connection between the WAN Edge device and a vSmart controller?

15. Which combination of platforms are managed by vManage?

16. Which logs verify when a device was upgraded?

17. Company ABC has decided to deploy the controllers using the On-Prem method.

How does the administrator upload the WAN Edge list to the vManage?

A)

B)

C)

D)

18. A network administrator is configuring an application-aware firewall between inside zones to an outside zone on a WAN edge router using vManage GUI.

What kind of Inspection is performed when the ‘’inspect’’ action is used?

19. Which command disables the logging of syslog messages to the local disk?

20. When the VPN membership policy is being controlled at the vSmart controller, which policy disallows VPN 1 at sites 20 and 30?

A)

B)

C)

D)

21. In the Cisco SD_WAN solution, vSmart controller is responsible for which two actions? (Choose two)

22. What is an advantage of using auto mode versus static mode of power allocation when an access point is connected to a PoE switch port?

23. Which two platforms for the Cisco SD-WAN architecture are deployable in a hypervisor on-premises or in IAAS Cloud? (Choose two)

24. Which configuration step is taken on vManage after WAN Edge list is uploaded?

25. Refer to the exhibit.

Which configuration change is needed to configure the tloc-extention on Branch1-Edge1?

A)

B)

C)

D)

26. Which two mechanisms are used to guarantee the integrity of data packets in the Cisco SD-WAN architecture data plane? {Choose two)

27. Which command on a WAN Edge device displays the information about the colors present in the fabric that are learned from vSmart via OMP?

28. Refer to exhibit.

An engineer is troubleshooting tear down of control connections even though a valid Certificate Serial Number is entered.

Which two actions resolve the Issue? (Choose two)

29. Which plane assists in the automatic onboarding of the SD-WAN routers into the SD-WAN overlay?

30. Which VPN connects the transport-side WAN Edge interface to the underlay/WAN network?

31. Refer to the exhibit.

A network administrator is configuring OMP in vManage to advertise all the paths for the same prefix from a site that has two WAN Edge devices Each WAN Edge device is connected to three ISPs and two private MPLS transports.

What is the minimum value for 'Number of Paths advertised per Prefix" that should be configured?

32. When redistribution is configured between OMP and BGP at two Data Center sites that have Direct Connection interlink, which step avoids learning the same routes on WAN Edge routers of the DCs from LAN?

33. Refer to the exhibit.

The ge0/0 interface connects to a 30-MB link. A network administrator wants to always have 10 MB available for high priority traffic. When lower-priority traffic busts exceed 20 MB.

Traffic should be redirected to the second WAN interface ge0/1.

Which set of configurations accomplishes this task?

A)

B)

C)

D)

34. Where on vManage does an engineer find the details of control node failure?

35. In which device state does the WAN edge router create control connections, but data tunnels are not created?

36. DRAG DROP

Drag and drop the policies from the left onto the correct policy types on the right.

37. A network administrator is tasked to make sure that an OMP peer session is closed after missing three consecutive keepalive messages in 3 minutes. Additionally, route updates must be sent every minute. If a WAN Edge router becomes unavailable, the peer must use last known information to forward packets for 12 hours.

Which set of configuration commands accomplishes this task?

38. What is a benefit of the application-aware firewall?

39. Which two products are used to deploy Cisco WAN Edge Router virtual platforms? (Choose two)

40. Which two WAN Edge devices should be deployed in a cloud? (Choose two)