Try HPE0-J58 Exam Dumps Of DumpsBase To Prepare For Designing Multi-Site HPE Storage Solutions Exam Well

1. A startup company is considering an HPE Nimble solution. They have a small IT budget, and they need to be future-proof for changing performance requirements.

How does the Nimble architecture meet the company needs? (Select two.)

2. You are designing an HPE 3PAR replication solution for a customer in a metropolitan area that includes two main sites and a third disaster recovery site. The main sites will be in synchronous replication. The disaster recovery site can be asynchronously replicated.

What are two points you should highlight to the customer? (Select two.)

3. A customer has an HPE Nimble Storage array. They plan to add a second HPE Nimble Storage array to their existing group.

What is the expected write behavior to a volume once the new array is added to the same pool as the existing array?

4. A customer has three 4-node HPE 3PAR arrays. Two of the arrays are deployed at a primary site, and the third array is deployed at a disaster recovery site. Both arrays at the primary site are replicated to the single array at the disaster recovery site.

All replication is asynchronous periodic. All arrays are utilizing 4 RCIP links for replication.

The customer needs to add a third array at the primary site. They would like to use the existing array at the disaster recovery site as a replication target for this additional array.

What must the architect consider to meet this customer requirement?

5. A customer needs to setup specific replication bandwidth requirements to limit the bandwidth between HPE Nimble Storage replication partners, which is different than the bandwidth requirements to another Replication Partner.

Which Bandwidth parameter should the customer use?

6. You have chosen to utilize HPE 3PAR synchronous replication in order to meet the customer stated

requirement of RPO=0.

What is a key consideration you need to explain to the customer?

7. You are proposing a replication solution to a customer. A competitor offers a solution based on storage

virtualization appliances.

What should you stress about an HPE 3PAR replication solution in regard to the competitor’s proposal?

8. Refer to the exhibit.

A customer has the environment shown. They currently perform application-consistent daily full backups via Veeam backup to an HPE StoreOnce device. These backups are then replicated to an alternate device using Catalyst copy.

Changing business requirements have mandated the RPO and RTO for the customer’s SQL databases be reduced to 15 minutes. Due to the size of the databases, it is not possible to meet this requirement with their existing backout application.

What should you recommend the customer implement in order to meet their new requirement?

9. Which advantage is provided by HPE 3PAR Remote Copy across all replication modes?

10. DRAG DROP

Click and drag the steps on the left into the appropriate order on the right to set up an HPE 3PAR array in InfoSight.

11. A customer has started to load their HPE 3PAR 8450 with data, but are not sure what data reduction they are achieving. They ask you to run analysis and estimate the deduplication ratio of data currently on a virtual volume (VV).

Which CLI command should you use to understand data reduction ratios?

12. A customer needs to new storage solution, including replication. The replication solution does not need to provide an RTO or RPO of zero.

The customer suffers from severe VM sprawl and has experienced unidentified storage service-level degradations.

What should you point out during your presentation of the solution?

13. A customer has HPE B-series switches and is not interested in Extended Fabric licenses for edge switches.

They have sites over 10km apart.

Which SAN extension technology should you recommend?

14. How does the HPE Nimble Storage product strategy support a customer’s investment protection requirements for today and the future?

15. A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.

What should you recommend to the customer?

16. A customer has recently acquired another company that is located less than 3 km from their current main location. Both locations use HPE B-Series products in their storage environment.

The customer needs to merge the 2 locations together while still using the current WAN and networking

infrastructure at both locations. They need to keep their initial cost down until they are able to redesign both networking infrastructures.

Which protocol should be incorporated when providing a proposal to meet the customer needs?

17. Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.

A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer’s environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.

What should you add the BOM to meet the customer needs?

18. A customer has two sites within a short distance. They require a primary storage solution which supports automatic failover for their block storage, SMB shares, and NFS home directories.

Which HPE solution best fits the customer’s requirements?

19. A customer needs to upgrade their existing HPE 3PAR environment. They ask you to present a solution to gather data from all 200 of their HPE 3PARs arrays, which are spread across the globe. The arrays consist of various generations and OS levels, and they are managed by regional instances of SSMC.

What should you present to the customer as a solution?

20. A customer has an aging Fibre Channel SAN from one vendor and a separate iSCSI SAN from another vendor. The customer wants to upgrade to a single vendor that will allow them to manage the SAN through a single vendor management console.

Which solution should you recommend?

21. A customer with an existing StoreOnce 5100 appliance needs guidance on determining long-term expected growth of the storage utilization based on actual usage.

However, the customer’s ISV backup software only shows 30 days of historical data.

Which step should be performed to check the StoreOnce 5100 for best practices and allow for growth planning?

22. A customer needs a new replication solution that makes use of capacity efficiency technologies, even though data is being replicated to another array.

You have been developing a solution that includes two HPE 3PAR arrays.

What should you emphasize in your proposal?

23. Refer to the exhibit.

A customer is looking to replace the backup environment shown.

Which HPE Storage Tool should you use to assess their backup environment?

24. A customer experiences a performance issues and blames the HPE 3PAR array. However, you suspect it is caused by a noisy neighbor situation in the VMware environment.

Which approach should you use to find and prove a root cause?

25. A customer is experiencing high utilization on their VMware ESXi server NICs when they backup virtual machines stored on an HPE 3PAR 8200.

Which technology is available on a StoreOnce VSA to reduce the network utilization?

26. A customer requires an all-flash solution that will scale out, with multiple arrays for replication. The customer also needs the solution to provide more data per terabyte of flash storage than competing solutions.

Which HPE program should you leverage in your solution to help meet the customer’s requirements?

27. A customer needs to analyze performance and capacity of their storage environment. Their environment consists of HPE 3PAR, EMC VNX, and Pure Systems.

Which tool should you use to begin your assessment of their environment?

28. A customer has a requirement to provide Disaster Recovery for an application that is very sensitive to IO latency.

The customer has specified an RPO of less than 3 minutes for this application.

How can HPE 3PAR Remote Copy help meet the customers specified requirements?

29. A customer has two sites. The link between sites is Fibre Channel, and the distance between sites is less than 1km. The link latencies are within HPE recommended tolerances.

The customer asks you to design a Peer Persistent solution using HPE servers running physical Windows

2016 servers and HPE 3PAR storage.

What are characteristics of the Quorum Witness? (Select two.)

30. You want to use FCAP authentication in an environment with FOS 7.3 running switches with no extra licenses.

What should you do to use this feature?

31. A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover.

Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?

32. A customer has a requirement to provide disaster recovery for an application. The application has an RPO of 30 mins, with an RTO of 15 mins.

How can HPE 3PAR Remote Copy help meet the customer’s specified

requirements in the most cost effective manner?

33. A customer has two data centers in a metropolitan areA. The link between the data centers is IP-based and satisfies the bandwidth and latency requirements.

They have the following requirements:

・ Transparently and automatically failover and fall back between sites

・ Provide block and file access

・ Block access must provide connectivity for fibre channel and iSCSi hosts

・ All-Flash storage solution

You plan to propose a design based on HPE 3PAR storage arrays.

What would be the most cost-effective model that meets the customer needs?

34. A customer needs to replicate the data on their HPE 3PAR arrays between their datacenters. Their

datacenters are 250km apart. The link between the sites has an RTO of 100 ms, and they have an RPO of 3 minutes.

Which replication method should you recommend to meet the customer needs?

35. A customer needs a data recovery solution for their HPE 3PAR array.

They have the following requirements:

・ RPO needs to be within three hours

・ RTO needs to be within three hours

・ There is no need for offsite data archive

・ They will have a limited maintenance window

Which solution meets all of the customer needs?

36. A customer has a solution from another vendor. The customer ran into issues of a disproportionally high failure rate of media keeping logfile datA. The issue also appeared in the second array, to which the data is being replicated.

The customer specifically asks you for a solution that will not have this same issue.

Which feature of HPE 3PAR arrays should you emphasize?

37. A customer needs to replace outdated storage arrays.

Which resource provides the necessary information to properly size a solution?

38. A customer has two HPE Nimble arrays that are replication partners. The customer suffers a complete outage on the source array.

What does the administrator need to do to make the most recent snapshot available?

39. Refer to the exhibit.

A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression.

Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?

40. Refer to the Exhibit.

A customer with an existing HPE Nimble installation sends you the output shown. The administrator who initially set up the replication has left the company.

They ask you what the current RPO level for their replication is.

How should you respond?