The Latest 300-430 Dumps V17.03: Achieve Success with DumpsBase

1. On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised.

Considering that FlexConnect local switching is enabled, which setting is causing this behavior?

2. An engineer must implement intrusion protection on the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult.

Which AP mode and submode must be implemented?

3. An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP.

Which client feature becomes available only if this configuration is changed?

4. A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors.

When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured, how many image transfers between the WLC and APs will occur?

5. Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?

6. When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?

7. Refer to the exhibit.

A customer has implemented Cisco FlexConnect deployments with different WLANs around the globe and is opening a new branchin a different location. The engineer’s task is to execute all the wireless configuration and to suggest how to configure the switch ports for new APs.

Which configuration must the switching team use on the switch port?

8. A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC.

Which configuration should be used to accomplish this goal?

9. An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely.

What is configured on the Cisco WLC to allow the user to print a printer on his home network?

10. An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs.

Which two Layer 2 security options are supported in this environment? (Choose two.)

11. An organization is supporting remote workers in different locations. In order to provide wireless network connectivity and services, OfficeExtendhasbeen implemented. The wireless connectivity is working, but users report losing connectivity to their local network printers.

Which solution must be used to address this issue?

12. What is configured to use more than one port on the OEAP to extend the wired network?

13. An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC.

Which feature meets these requirements?

14. An engineer must configure Cisco OEAPs for three executives. As soon as the NAT address is configured on the management interface, it is noticed that the WLC is not responding for APs that are trying to associate to the internal IP management address.

Which command should be used to reconcile this?

15. An engineer is responsible for a wireless network for an enterprise. The enterprise has distributed offices around the globe, and all APs are configured in FlexConnect mode. The network must be configured to support 802.11r and CCKM.

What needs to be implemented to accomplish this goal?

16. A corporation has employees working from their homes. A wireless engineer must connect 1810 OEAP at remote teleworker locations. All configuration has been completed on the controller side, but the network readiness is pending.

Which two configurations must be performed on the firewall to allowthe AP to join the controller? (Choose two.)

17. An enterprise has two WLANs configured on WLC. It is reported that when converting APs to FlexConnect mode, WLAN A works but WLAN B does not. When converting APs to local mode, WLAN B works, but WLAN A does not.

Which action is needed to complete this configuration?

18. An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets received, and then have the differentiated services code point set to match when it is resent to another port on the switch.

Which configuration is required in the network?

19. When using a Cisco Catalyst 9800 Series Wireless Controller, which statement about AutoQoS is true?

20. A network engineer is deploying 8865 IP phones with wireless clients connected to them. In order to apply the appropriate QoS, the IP voice traffic needs to be distinguished from client data traffic.

Which switch configuration feature must be enabled?

21. A network engineer wants to implement QoS across the network that supports multiple VLANs. All the APs are connected to switch ports and are configured in local mode.

Which trust model must be configured on the switch ports to which the APs are connected?

22. An enterprise started using WebEx as a virtual meeting solution. There is a concern that the existing wireless network will not be able to support the increased amount of traffic as a result of using WebEx. An engineer needs to remark the QoS value for this application to ensure high quality inmeetings.

What must be implemented to accomplish this task?

23. A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched SSID is configured for the APs.

Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?

24. A company is collecting the requirements for an on-premises event. During the event, a wireless client connected to a dedicated WLAN will run a video application that will need on average 391595179 bits per second to function properly.

What is the QoS marking that needs to be applied to that WLAN?

25. Refer to the exhibit.

Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)

26. An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network.

Which element do you configure in a rule?

27. An IT administrator is managing a wireless network in which most devices are Apple iOS. A QoS issue must be addressed on the WLANs.

Which configuration must be performed?

28. What is the Cisco recommended configuration for a Cisco switch port connected to an AP in local mode for optimal voice over WLAN performance with an 8821 wireless phone?

29. An engineer has configured Media Stream on the WLC and must guarantee at least 2 Mbps stream per user.

Which RRC template should the engineer use?

30. Refer to the exhibit.

Which COS to DSCP map must be modified to ensure that voice traffic is tagged correctly as it traverses the network?

31. Which QoS level is recommended for guest services?

32. An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.

Which configuration is needed to complete this task?

33. All APs are receiving multicast traffic, instead of only the APs that need it.

What is the cause of this problem?

34. What is the difference between PIM sparse mode and PIM dense mode?

35. An engineer has been hired to implement a way for users to stream video content without having issues on the wireless network. To accomplish this goal, the engineer must set up a reliable way for a Media Stream to work between Cisco FlexConnect APs.

Which feature must be enabled toguarantee delivery?

36. A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs.

Which feature corrects the issue?

37. An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source.

Which type of multicast routing should be implemented?

38. Which statement about the VideoStream/Multicast Direct feature is true?

39. Which configuration is applied to prevent the network from a Layer 2 flooding of multicast frames with a seamless transfer of multicast data to the client when roaming from one controller to another?

40. An engineer is configuring multicast for two WLCs. The controllers are in different physical locations and each handles around 500 wireless clients.

How should the CAPWAP multicast group address be assigned during configuration?

41. A wireless network has been implemented to enable multicast video to be streamed reliably over the wireless link to the wireless users. After a clientreports that the video is unable to stream, the administrator determines that the client is connecting at a data rate of 12 Mbps and is trying to stream to a valid multicast address on the network.

Which two actions must be applied? (Choose two.)

42. Which two restrictions are in place with regards to configuring mDNS? (Choose two.)

43. A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers.

Which address provides automatic discovery of the best RP for each multicast group?

44. A shopping center uses AireOS controllers with Cisco Wave 2 APs. A separate WLAN named Guest-012345678-WLAN is used for guest wirelessclients. Management needs location analytics to determine popular areas. CMX must track only associated clients.

What must be selected on the CMX server settings?

45. A wireless engineer needs to implement client tracking.

Which method does the angle of arrival use to determine the location of a wireless device?

46. Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure to track the location of clients/rogues on maps? (Choose two.)

47. An IT department receives a report of a stolen laptop and has information on the MAC address of the laptop.

Which two settings must be set on the wireless infrastructure to determine its location? (Choose two.)

48. Refer to the exhibit.

An engineer needs to manage non-802.11 interference.

What is observed in the output on PI?

49. After looking in the logs, an engineer notices that RRM keeps changing the channels for non-IEEE 802.11 interferers. After surveying the area, it has been decided that RRM should not change the channel.

Which feature must be enabled to ignore non-802.11 interference?

50. Which two protocols are used to communicate between the Cisco MSE and the Cisco Prime Infrastructure network management software? (Choose two.)

51. An engineer must configure MSE to provide guests access using social media authentication.

Which service does the engineer configure so that guests use Facebook credentials to authenticate?

52. A network engineer has been hired to perform a new MSE implementation on an existing network. The MSE must be installed in a different network than the Cisco WLC.

Which configuration allows the devices to communicate over NMSP?

53. What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?

54. An engineer just added a new MSE to Cisco Prime Infrastructure and wants to synchronize the MSE with the Cisco 5520 WLC, located behind a firewall in a DMZ. It is noticed that NMSP messages are failing between the two devices.

Which traffic must be allowed on the firewall to ensure that the MSE and WLC are able to communicate using NMSP?

55. Refer to the exhibit.

An engineer needs to configure location services in an office. The requirement is to use FastLocate and achieve higher locations refresh rates.

Which location-based technique should be implemented?

56. An engineer is managing a wireless network for a shopping center. The network includes a Cisco WLC, a Cisco MSE, and a Cisco Prime Infrastructure.

What is required to use Cisco CMX Location Analytics?

57. An engineer configures a deployment to support:

✑ Cisco CMX

✑ licenses for at least 3000 APs

✑ 6000 wIPS licenses

The Cisco vMSE appliance must be sized for this deployment.

Which Cisco vMSE Release 8 option must the engineer deploy?

58. A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers.

Which protocol must be allowed to reach the MSE from the controllers?

59. Which two statements about the requirements for a Cisco Hyperlocation deployment are true? (Choose two.)

60. An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX.

Which two parameters arerelevant? (Choose two.)

61. Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?

62. The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed.To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm. However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied.

What actions should be taken to resolve this issue?

63. An engineer must track guest traffic flow using the WLAN infrastructure.

Which Cisco CMX feature must be configured and used to accomplish this tracking?

64. An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window.

Which setting on Cisco CMX allows the engineer to view the tags?

65. An engineer completed the basic installation for two Cisco CMX servers and is in the process of configuring high availability, but it fails.

Which two statements about the root of the issue are true? (Choose two.)

66. Refer to the exhibit.

The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server.

What does the capture prove?

67. A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails.

Which configuration change resolves this issue?

68. An engineer has implemented advanced location services for a retail wireless deployment. The marketing department wants to collect user demographic information in exchange for guest WLAN access and to have a customized portal per location hosted by the provider.

Which social connector must be tied into Cisco CMX to provide this service?

69. What are two considerations when deploying a Cisco Hyperlocation? (Choose two.)

70. After installing and configuring Cisco CMX, an administrator must change the NTP server on the Cisco CMX server.

Which action accomplishes this task?

71. A customer managing a large network has implemented location services. Due to heavy load, it is needed to load balance the data coming throughNMSP from the WLCs. Load must be spread between multiple CMX servers to help optimize the data flow for APs.

Which configuration in CMX meets this requirement?

72. An engineer needs to provision certificates on a Cisco Catalyst 9800 Series Wireless Controller. The customer uses a third-party CA server.

Which protocol must be used between the controller and CA server to request and install certificates?

73. A corporation has recently implemented a BYOD policy at their HQ.

Which two risks should the security director be concerned about? (Choose two.)

74. When implementing self-registration for guest/BYOD devices, what happens when an employee tries to connect four devices to the network at the same time?

75. What is an important consideration when implementing a dual SSID design for BYOD?

76. Refer to the exhibit.

A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devicesconnecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints.

Which action efficiently rectifies the issue according to Cisco recommendations?

77. An engineer must implement a BYOD policy with these requirements:

• Onboarding unknown machines

• Easily scalable

• Low overhead on the wireless network

Which method satisfies these requirements?

78. A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber.QoS is being applied only as best effort.

What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?

79. An engineer is implementing profiling for BYOD devices using Cisco ISE.

When using a distributed model, which persona must the engineer configure with the profiling service?

80. DRAG DROP

The network management team in a large shopping center has detected numerous rogue APs from local coffee shops that are broadcasting SSIDs. All of these SSIDs have names starting with ATC (for example, ATC302, ATC011, and ATC566). A wireless network engineer must appropriately classifythese SSIDs using the Rogue Rules feature.

Drag and drop the options from the left onto the categories in which they must be used on the right. Not all options are used.