Pass Your VMware vSAN Specialist 5V0-22.21 Exam with Confidence – Updated 5V0-22.21 Dumps

1. A vSAN administrator is using the vSANReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleagues inquire about the Operations Reserve option.

What is the purpose of using this option?

2. An administrator has a 4-node vSAN cluster, and all virtual machine storage policies are configured as RAID-1 FTT-1. The administrator puts Host-1 in maintenance mode using "Ensure Accessibility".

During this time, Host-2, which is holding the updated object replica, fails permanently. A few moments later, Host-1 exits maintenance mode.

What happens to the writes that were committed on Host-2 after Host-1 enters this mode?

3. Which solution can automate the deployment of a vSAN cluster as part of a full Software-Defined Datacenter?

4. An administrator will be performing a rolling upgrade of a vSAN cluster over the weekend.

In preparation, the administrator runs the Data Migration Pre-Check.

Which two items are being checked? (Choose two.)

5. All of the virtual machines running on a hybrid vSAN datastore have this storage policy assigned:

Failures to Tolerate (FTT) rule is set to “2 Failures - RAID-1 (Mirroring)”.

The vSAN administrator needs to reduce the amount of vSAN datastore capacity the virtual machines will consume.

Which action should the vSAN administrator take to meet this goal?

6. A vSAN administrator has two identical VMware vSAN clusters, one for staging workloads and another for production workloads. Due to an unforeseen capacity requirement, the vSAN administrator is tasked with merging the staging vSAN cluster into the production.

Which two actions should the vSAN administrator perform on the staging cluster prior to moving the vSAN nodes to the production cluster? (Choose two.)

7. A vSAN administrator has reported a security vulnerability to the security officer of the organization. Currently, the vSAN cluster runs on vSAN 7.0. The administrator suggests patching the vSAN cluster and gets approval from the security officer to apply the latest patch for vSAN.

The administrator uses vSphere Lifecycle Manager to apply the patch to the current image.

The organization requirements state that patches should be installed as fast as possible on the hosts.

Which configuration should the administrator apply to complete this installation?

8. The administrator has successfully deployed a vSAN Stretched Cluster and needs to ensure that any virtual machines that are created are placed in the appropriate site.

Which two steps are needed to complete this task? (Choose two.)

9. A site administrator has determined that the site needs to upgrade all vSAN clusters to 7.0 U1. The vSAN administrator wishes to complete the update in the shortest amount of time possible. All virtual machines are assigned a storage policy where the “Failures to tolerate” is set to one or higher.

Which strategy should be used to achieve this goal?

10. A vSAN administrator has been tasked to add capacity to an existing vSAN cluster and has ordered enough larger capacity devices to complete this work. Tests have been executed, and the replacement from one single capacity device will require 70 minutes.

Which two approaches can the vSAN administrator use to complete this task? (Choose two.)

11. A vSAN administrator has three available racks and six vSAN hosts and needs to protect against a rack failure while maximizing resources.

Which two strategies should the vSAN administrator use to achieve this goal? (Choose two.)

12. A VMware vSAN administrator is configuring advanced monitoring with VMware vRealizeOperations Manager and has the following requirement:

• Ability to receive analytical information from the hard drive to determine a possible future failure of the hard drive.

What should be enabled for data collection when configuring the vSAN Adapter Instance?

13. A vSAN administrator needs to find the metrics for objects containing data served up by the vSAN iSCSI service.

On which level should the vSAN administrator look?

14. A currently-deployed vSAN cluster must deliver persistent storage to be used by vSphere with Tanzu. The administrator needs to properly configure the vSAN Direct Configuration for this solution.

Which three steps should be taken? (Choose three.)

15. After a recent data loss event, the IT department plans to deploy a DR site using vSphere Replication with vSAN providing the storage backend.

The architect would like to know how many components will be created based on the following configuration:

✑ 2x 100 GB VMDK

✑ RAID 1 vSAN Storage Policy

✑ 4x Point in Time snapshots

How many components will be created?

16. A storage administrator is facing degraded performance for the VMs running on a vSAN enabled vSphere Cluster and needs an out-of-the-box tool to identify the root cause of the problem.

Which tool should be used?

17. A vSAN administrator is looking at adding a new vSAN cluster with hosts that have 512GB memory.

What is the minimum requirement for the node’s flash boot device?

18. A host in the cluster experiences a permanent NIC failure, and the replacement part will not arrive until the next morning. The administrator needs to ensure the availability of the production workload at all times.

Which step should be taken by the administrator to meet this goal?

19. A vSAN administrator has been tasked with troubleshooting an application in a Hybrid vSAN environment. The application is I/O intensive, and the magnetic capacity devices may be playing a role in slow performance, so the administrator decides to take action to help resolve the problem.

Which action should the administrator take?

20. Which two storage policy changes result in a component resync? (Choose two.)

21. A vSAN architect is using the vSAN Sizer to build an All-Flash vSAN cluster for an accounting company. The architect is trying to determine why 12 TBs are set aside for system overhead and is reviewing the items that are include in the overhead capacity.

Which two items are included? (Choose two.)

22. A vSAN administrator observes that the VMware Skyline Health: Disk Format Version reports a format version that is lower than the expected version.

What does this status mean?

23. A new vSAN Cluster with four hosts has to be designed for a single site architecture.

Which design decision is correct?

24. Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)

25. A large financial company has an existing vSAN 7.0 U1 cluster containing production virtual machines and the vCenter Server. The cluster needs to be physically moved to another location within the datacenter to allow new racks to be installed, so the platform needs to be powered down.

Which action should the vSAN administrator take to perform this procedure safely?

26. What does enablingvSAN operations reserve help ensure?

27. An administrator has successfully deployed a new 3-node vSAN Cluster. Prior to deploying any production workloads on to the new cluster, the administrator must complete a number of Service Validation and Testing (SVT) checks.

The final check requires the administrator to pull out a disk from one of the vSAN hosts.

Which two outcomes will occur within the vSAN cluster following this action? (Choose two.)

28. What should be used to verify object resynchronization progress and impact after a global policy change?

29. Saved the configuration

After saving the configuration, all hosts in the cluster are out of compliance.

Which step is needed next to accomplish this task?

30. What is the maximum time range that can be stored by the vSAN health check history?

31. A vSAN administrator is tasked to perform an upgrade of a vSAN cluster from 7.0 to 7.0 U2, including firmware and drivers for its hardware. The vSAN administrator already created an image using vSphere Lifecycle Manager (vLCM).

Prior to selecting Start Remediation, which step should be taken to upgrade the complete vSAN cluster as a single task?

32. Which tool should be used to identify vSAN unassociated objects?

33. A vSAN administrator is investigating vSAN performance related problems but cannot find any vSAN performance statistics on the cluster summary page.

Why is this situation occurring?

34. Which vSAN advanced setting can be adjusted to avoid rebuild operations during a host hardware maintenance window that is expected to exceed 90 minutes?

35. An administrator wants to check the vSAN cluster health during the maintenance window while vCenter Server is offline.

What are two ways to complete this task? (Choose two.)

36. A vSAN administrator is deploying multiple 2-node clusters to remote branch offices. The nodes already have an old vSphere 7.0 image, but the administrator would like to update the image and ensure consistency across all the nodes.

The administrator configured vLCM on the first vSAN cluster and exported the image.

Which format should the administrator choose?

37. What happens to a disk group during cache disk removal?

38. An administrator is preparing maintenance on a host in a vSAN cluster, and the maintenance is expected to take less than one hour. The administrator is considering using the "Full Data Migration" but understands that this can be time consuming and also has additional capacity and performance considerations.

Which action would alleviate these concerns?

39. A vSAN administrator has recently upgraded to vSAN 7.0 U1. The vSAN administrator wants to control the amount of Capacity Reserve to use the underutilized capacity of - 140TB in the cluster of 12 vSANReadyNodes& 400TB storage for vSAN internal operations.

Which two options should be used to accomplish this goal? (Choose two.)

40. A 100GB virtual disk object has this storage policy assigned to it:

✑ Site disaster tolerance: None - standard cluster

✑ Failures to Tolerate: 1 failure - RAID-1 (Mirroring)

✑ Number of disk stripes per object: 3

What is the maximum amount of raw vSAN storage capacity consumed by this virtual disk?

41. An administrator needs to design a new vSAN cluster to host production mission critical workloads.

Which three topics would impact this design? (Choose three.)

42. A vSAN administrator notices that the VMware Skyline Health: Network Latency Check reports indicate that three hosts are noncompliant.

Which action should the vSAN administrator take?

43. Which two conditions should be verified before removing an ESXi host from a vSAN cluster? (Choose two.)

44. A large enterprise has a main campus with two 8-Node vSAN 7.0 U1 clusters and 50 remote sites, each containing one 2-Node cluster. An administrator configures a vLCM desired image for lifecycle management, and vLCM had determined that all the clusters are in need of remediation.

How would vLCM enhance the remediation operation in this situation?

45. Which VM file type resides in the VM home namespace object on a vSAN datastore?

46. An organization is facing vSAN storage capacity challenges on one of their vSAN enabled clusters, while other vSAN enabled clusters are underutilized. The current vSAN version is 7.0 U1.

Which vSAN feature should be used to resolve this challenge in the quickest way?

47. A vSAN administrator is implementing deduplication and compression on a vSAN all-flash cluster but wants the VMs to remain operational.

The details are as follows:

✑ There are 4 nodes in the vSAN cluster.

✑ Existing VMs use a RAID-5 storage policy.

Which action should the vSAN administrator take to meet this goal?

48. Which two requirements should the vSAN administrator consider in order to accomplish this goal? (Choose two.)

49. When attempting to add a directly attached disk device to a host disk group, the intendeddisk does not show among the available devices in disk management.

Which action should be taken?

50. An administrator must choose between deploying a virtual witness or physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness.

What is a benefit of selecting this approach?

51. An administrator has discovered that space utilized by VMs does not decrease after deleting files and folders within the VMs. The administrator needs to be able to reclaim this space.

Which action could the administrator take to accomplish this task?

52. A financial institute deployed a vSAN Stretched Cluster to provide geographical resiliency. After a recent WAN outage, the institute decided to deploy a smaller warm site and use vSphere Replication to asynchronously replicate the data.

The environment has the following configurations:

• 1300 VMs

• 300 TBs of storage

• RAID-5 vSAN storage policy

What is the minimum amount of vSphere Replication servers required to support the requirement?

53. The cluster level backend IOPS performance graph shows a higher-than-average number of IOPS for back-end storage.

What is a possible reason for this situation?

54. What os the maximum number of 2-node clusters that can share a vSAN Shared Witness host in vSAN 7.0 U1?

55. An administrator wishes to prevent vCenter notifications of vSAN Health status during a scheduled maintenance window.

Which action can be taken to achieve this goal?

56. An administrator has deployed a new vSAN cluster that contains eight hosts and needs to configure a storage policy for the currently deployed database virtual machines. The requirements state that if two hosts in the vSAN cluster fail, all virtual machines are unaffected.

Which RAID configuration must the administrator use in this storage policy to achieve the best performance for the database virtual machines?

57. Which two considerations should an architect make when designing a HCI Mesh solution with VMware vSAN and VMware vSphere High Availability (HA)? (Choose two.)

58. A host in a vSAN cluster has the following VMware Compatibility Guide approved disks:

• 3 Solid State Drive (SSD) used for cache

• 12 magnetic Hard Disk Drives (HDD) used for capacity

Which two options are valid disk group configurations? (Choose two.)

59. vSAN requires that the virtual machines deployed on the vSAN datastores are assigned at least one storage policy, but the administrator did not explicitly assign a storage policy when provisioning the new VM.

What is the result of this situation?

60. What is the default health check interval for the vSAN Health services?