NCP-BC-7.5 Exam Dumps (V8.02) – 2026 New Study Guide for Better Nutanix Certified Professional – Business Continuity v7.5 Preparation

To all, the Nutanix Certified Professional – Business Continuity v7.5 (NCP-BC-7.5) beta exam is available now. It is designed to validate your ability to plan, configure, execute, and troubleshoot disaster recovery solutions within the Nutanix portfolio. For better preparation, you can have the NCP-BC-7.5 exam dumps (V8.02) from DumpsBase today. We share 109 practice questions and answers in V8.02, which are often scenario-based to help you understand how different concepts work together. By practicing with these realistic questions, you can become familiar with the exam format and learn how to analyze each question carefully instead of relying only on memory. With the newest NCP-BC-7.5 dumps (V8.02), you can better understand the exam structure, focus on high-value topics, and prepare more confidently for the Nutanix Certified Professional – Business Continuity v7.5 certification exam.

Before downloading the NCP-BC-7.5 dumps (V8.02), you can read NCP-BC-7.5 free dumps first:

1. An administrator is testing the failover scenarios from a source availability zone (AZ1) to a destination availability zone (AZ2).

The administrator successfully performs an unplanned failover from AZ1 to AZ2. The administrator then immediately tries to use the unplanned failover option to fail the VM back to AZ1, but does not see the VM listed under Recovery Plan.

What could be the cause?
2. An administrator has set up asynchronous replication between the Marseille and Paris clusters for the VMs in the FIN-PROD storage container. After a planned production failover from Paris to Marseille, the administrator noticed that the VMs were scattered across all the storage containers in the Marseille cluster.

Which statement is true regarding this scenario?
3. The Disaster Recovery dashboard in Prism Central shows that the protection domain is out of sync and new recovery points are no longer being created at the recovery site. No recent changes were made to the protection policy configuration or RPO settings.

During initial troubleshooting, an administrator has observed the following:

Production VMs are running normally at the primary site.

The recovery cluster is reachable from Prism Central.

No storage capacity alerts are seen on either cluster.

A recent network change was implemented to enable network segmentation between clusters.

New firewall rules were introduced recently as part of a security hardening effort.

Which action should the administrator take first when evaluating this issue?
4. An organization uses a Recovery Plan to protect a SQL Cluster that relies on Volume Groups (VGs). The VGs are configured with hypervisor attachments. The administrator executes a Planned Failover to migrate the SQL Cluster to the Recovery Site.

The Failover task completes successfully, but the database administrators report that the database is offline.

What is the possible cause of this issue?
5. A Veeam backup job is configured to use Nutanix application-consistent snapshots for several Windows VMs. Crash-consistent snapshots succeed, but Veeam reports that application-consistent snapshots fail with errors related to VSS processing.

Upon investigation, the administrator confirms:

The VMs are powered on.

Network connectivity between the backup server and cluster is healthy.

Which configuration should the administrator verify to resolve the issue?
6. What is the expected outcome that the administrator must manage?
7. After performing a failover of encrypted AHV VMs from an on-premises AZ to a recovery AZ, an administrator notices that newly written data is not encrypted.

Which post-failover cleanup task must be performed to correct this issue?
8. An administrator is configuring Disaster Recovery between an on-prem availability zone (AZ) and an NC2 cluster hosted in a public cloud. The business requires cross-cluster live migration between on-prem and NC2 without IP changes.

Which configuration must be satisfied to meet this requirement?
9. An administrator notices that VM replication from ClusterA to ClusterB fails consistently at the same point during the replication job.

The following observations are noted by the administrator:

The Prism dashboard shows the replication job failing during snapshot creation.

ClusterB storage pool and container usage is under 80%, well below capacity.

Network latency/Pings between ClusterA and ClusterB averages 3ms, with occasional spikes to 25ms.

VM event logs indicate frequent I/O timeout errors during the replication window.

Both clusters are running compatible AOS versions.

What is the most likely cause for the failing replications?
10. An administrator performed an unplanned failover from AZ1 (primary) to AZ2 (recovery). Later, AZ1 is restored and the administrator wants to fail back the entities to AZ1.

Which two statements are correct? (Choose two.)
11. What must an administrator verify before starting a migration of entities from a protection domain to a protection policy?
12. An organization uses Nutanix Disaster Recovery with automatic virtual network creation in the Nutanix Cloud AZ.

After a successful failback operation from the Nutanix Cloud AZ to the on-premises site, what is the expected behavior regarding the dynamically created virtual networks at the recovery site?
13. Refer to the exhibit.





An administrator is configuring Metro Availability in their environment, as shown in the diagram.

What issue in the configuration will prevent Metro from working correctly?
14. An administrator finds replications for Marketing VMs are failing to replicate.

After doing some digging the administrator was able to find the following:

Connectivity was confirmed on ports 2020 and 2009 between the clusters

All other VMs are replicating successfully

Cluster wide storage has plenty of remaining space

No firewall exists between the sites

Marketing VMs are running Windows, successful VMs are running Linux

What could be causing the Marketing VMs to fail replications?
15. After a failover and stabilization of workloads at the recovery AZ, an administrator removes several VMs from the protection policy because they are no longer required.

Which action should be performed as part of post-failover cleanup to prevent unnecessary storage consumption?
16. During routine monitoring, an administrator notices that replication from the primary Nutanix cluster to the recovery cluster has stopped. New recovery points are not being created, and the DR dashboard shows replication errors.

Investigation reveals:

The primary and recovery clusters are both online and healthy.

Network segmentation was recently enabled to isolate replication traffic from other workloads.

No recent changes were made to firewall rules, protection policies or RPO settings.

Which action should the administrator take first to investigate the replication failure?
17. An administrator intends to configure a NearSync replication schedule with a 15-minute Recovery Point Objective (RPO) on a hybrid 3-node cluster. The current nodes in the cluster are configured with one SSD and four HDDs each.

Which cost-effective modification is required to support this specific replication schedule?
18. A Protection Policy is configured with a Nearsync replication schedule (15-minute RPO). An administrator observes that the system has temporarily transitioned to an hourly replication schedule.

Which scenario would cause this automatic transition from Nearsync to Asynchronous (hourly) replication?
19. An administrator needs to provide leadership with a report showing the timeframe of each step during Recovery Plan failover testing.

How should the administrator produce this report?
20. An administrator is concerned about the operational overhead of manually creating and managing categories across both the primary and recovery sites to ensure Recovery Plans function correctly during failover and failback.

What Nutanix Disaster Recovery behavior minimizes this concern?
21. An organization requires strict control over data destruction. An administrator configures an Approval Policy for DR snapshots to prevent accidental deletion. A user attempts to delete a recovery point protected by this policy.

What is the immediate outcome of this deletion attempt within the Prism Central interface?
22. An organization requires a maximum data loss of 15 minutes for a Tier-1 application running on Nutanix AHV.

Which configuration best meets this requirement?
23. An administrator protects workloads between two ESXi clusters using asynchronous (async) replication.

After failover, VMs power on successfully but are placed in the default folder and resource pool instead of their original vSphere folders.

Why did this occur?
24. An administrator recently expanded a Nutanix cluster by adding several new nodes. Shortly after, multiple backup jobs began failing.

The following error is consistently reported:

Failed to perform backup: Cannot complete process 'iscsiadm --mode discovery --type sendtargets -- portal X.X.X.X' within timeout

What is the most likely cause of the failure?
25. An administrator executes an Unplanned Failover of web server VMs from an on-premises AZ to a Nutanix Cloud Cluster (NC2) on AWS. The Recovery Plan completes, and the VMs are running. However, external users cannot access the websites hosted on these VMs. The administrator verifies that the firewall rules are set correctly.

What specific configuration is required for these VMs to be reachable from the external network after failover to NC2?
26. An administrator needs to provide the QA team with a VM state from four days ago to test an older browser version. However, the current production VM contains new application code and security patches that must not be deleted or overwritten.

Which restore operation should the administrator perform to meet this requirement?
27. An administrator incorrectly used the "Activate" functionality on the PD to test failover of VMs from production to DR cluster. The VMs were successfully restored on the DR side.

What steps are needed to clean up the VMs on the DR side and resume normal operations on the Production cluster?
28. An administrator is managing a mission-critical Inventory-VM that is part of a Protection Domain (PD) named PD_Production.

Monday: A scheduled snapshot of PD_Production is successfully taken.

Tuesday: Due to a configuration error during a cleanup task, the administrator accidentally removes Inventory-VM from the PD_Production Protection Domain. The VM continues to run, but it is no longer being snapped or replicated.

Wednesday: A database corruption occurs on Inventory-VM. The administrator finds the local snapshot from Monday and performs an In-place Restore (Revert) to recover the data.

Following the successful completion of the In-place Restore, what is the status of Inventory-VM regarding its data protection?
29. What must the maximum Round Trip Latency be less than between a Witness VM and Metro Availability PDs?
30. When designing a Disaster Recovery strategy to an NC2 cluster using MST, which technical limitation impacts the Recovery Plan and workload compatibility?
31. An administrator is planning a scheduled maintenance window that will temporarily interrupt network connectivity between the primary and recovery sites. Several Tier 1 VMs are protected with a Synchronous replication Protection Policy.

What must the administrator do before beginning the maintenance window to prevent these VMs from becoming unresponsive without making RPO changes?
32. Which file system is supported on Linux VMs for Self-Service Restore?
33. A company's two clusters are part of the same availability zone. Prism Central, which holds the protection policy configuration and recovery plans, is located on Cluster A and protected by the Prism Central Backup and Restore mechanism.

What is the first step to take to execute a disaster recovery plan on the datacenter hosting Cluster A?
34. While attempting to execute a Commvault backup plan, an administrator received the following error for several VMs:

Virtual Machine not found

After confirming the VMs exist, the administrator digs deeper and finds the following related error message:

Event Code 91:4 Virtual machine [Nutanix-Web-Server] was not found. Please verify that the virtual machine still exists and that the host is in the connected state. If the virtual machine does not exist remove it from the subclient. If the virtual machine does exist reselect the virtual machine and re-add it to the subclient content.

Which action should the administrator take to enable successful backups?
35. A sudden and unrecoverable hardware failure occurs at the primary site, making the Prism Element console for that cluster inaccessible. The secondary site is healthy and contains the latest replicated snapshots.

Which action must the administrator take on the secondary cluster to restore the VMs?
36. An administrator has been tasked with configuring a Nutanix replication solution that provides an RPO of zero.

Which solution should the administrator choose?
37. Which log file should an administrator review to ensure consistent connectivity stability between primary and remote disaster recovery sites?
38. How does Nutanix Disaster Recovery automatically handle Container Mapping if a storage container with the same name does not exist at the recovery Nutanix cluster?
39. What must be installed on a guest VM prior to enabling Self-Service Restore?
40. An organization has two Nutanix clusters managed by a single Prism Central (PC) instance. They intend to implement Synchronous Replication between the sites. During a failover test, the administrator notices that automatic failover does not occur when the primary site's storage becomes unavailable.

What is the most likely cause of this behavior based on an analysis of the requirements?

 

New NCP-NS-7.5 Dumps (V8.02) for Easy Nutanix Certified Professional Network & Security v7.5 Exam Preparation 2026

Add a Comment

Your email address will not be published. Required fields are marked *