Microsoft AZ-801 Exam Dumps (V16.02) Are Online for Learning: Continue to Check AZ-801 Free Dumps (Part 2, Q41-Q80) Online

Professionals can choose the Microsoft AZ-801 exam dumps (V16.02), using various strategies and resources to prepare for the Configuring Windows Server Hybrid Advanced Services certification exam. To assist you in checking the AZ-801 dumps (V16.02), DumpsBase has shared the AZ-801 free dumps (Part 1, Q1-Q40) of V16.02 online. From these dumps, you can trust that DumpsBase offers you some insight into what you can anticipate in the Configuring Windows Server Hybrid Advanced Services exam. Continue to check our free dumps of V16.02 today. Then you can trust that we supply AZ-801 dumps (V16.02) for effective preparation so that you can get high marks.

Below are the Microsoft AZ-801 free dumps (Part 2, Q41-Q80) of V16.02 for reading:

1. You have two Azure Virtual machines that run Windows Server.

You plan to create a failover cluster that will host the virtual machines.

You need to configure an Azure Storage account that will be used by the cluster as a cloud witness.

The solution must maximize resiliency.

Which type of redundancy should you configure for the storage account?

2. You have 10 servers that run Windows Server in a workgroup.

You need to configure the servers to encrypt all the network traffic between the servers. The solution must be as secure as possible.

Which authentication method should you configure in a connection security rule?

3. HOTSPOT

You need to implement alerts for the domain controllers. The solution must meet the technical requirements.

What should you do on the domain controllers, and what should you create on Azure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

4. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server 2012 R2.

Sysvol replicates by using the File Replication Service (FRS).

You plan to replace the existing domain controllers with new domain controllers that will run Windows Server 2022.

You need to ensure that you can add the first domain controller that runs Windows Server 2022.

Solution: You run the Active Directory Migration Tool (ADMT).

Does this meet the goal?

5. DRAG DROP

You have a server that runs Windows Server.

You plan to back up the server to an Azure Recovery Services vault once per week starting on the next Saturday.

You need to schedule the weekly backup and perform the initial backup as soon as possible.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer are and arrange them in the correct order.

6. HOTSPOT

You have a failover cluster named FC1 that contains two nodes named Server1 and Server2. FC1 is configured to use a file share witness.

You plan to configure FC1 to use a cloud witness.

You need to configure Azure Storage accounts for the cloud witness.

Which storage account type and authorization method should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

7. HOTSPOT

Your network contains an Active Directory Domain Services (AD DS) forest.

The forest contains the domains shown in the following table.

You are implementing Microsoft Defender for Identity sensors.

You need to install the sensors on the minimum number of domain controllers. The solution must ensure that Defender for Identity will detect all the security risks in both the domains.

What should you identify? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

8. You have a Microsoft Sentinel deployment and 100 Azure Arc-enabled on-premises servers. All the Azure Arc-enabled resources are in the same resource group.

You need to onboard the servers to Microsoft Sentinel. The solution must minimize administrative effort.

What should you use to onboard the servers to Microsoft Sentinel?

9. You have an Azure subscription that has Microsoft Defender for Cloud enabled.

You have 50 Azure virtual machines that run Windows Server.

You need to ensure that any security exploits detected on the virtual machines are forwarded to Defender for Cloud.

Which extension should you enable on the virtual machines?

10. You need to meet the technical requirements for Cluster3.

What should you include in the solution?

11. DRAG DROP

You have an Azure virtual machine named VM1 that runs Windows Server. VM1 has boot diagnostics configured to use a managed storage account.

You are troubleshooting connectivity issue on VM1.

You need to run a PowerShell cmdlet on VM1 by using the Azure Serial Console.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

12. You are planning the data share migration to support the on-premises migration plan.

What should you use to perform the migration?

13. You plan to deploy the Azure Monitor agent to 100 on-premises servers that run Windows Server.

Which parameters should you provide when you install the agent?

14. DRAG DROP

Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains a print server named Server1. All printers are deployed to users by using a Group Policy Object (GPO) named GPO1.

You deploy a new server named Server2.

You need to decommission Server1.

The solution must meet the following requirements:

✑ Migrate the shared printers to Server2 by using the Printer Migration Wizard.

✑ Ensure that the users use the printers on Server2.

✑ Minimize downtime for the users.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

15. HOTSPOT

You have a failover cluster named Cluster1 that contains three nodes.

You plan to add two file server cluster roles named File1 and File2 to Cluster1. File1 will use the File Server for general use role. File2 will use the Scale-Out File Server for application data role.

What is the maximum number of nodes for File1 and File2 that can concurrently serve client connections? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

16. HOTSPOT

Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com.

The domain contains the organizational units (OUs) shown in the following table.

In the domain, you create the Group Policy Objects (GPOs) shown in the following table.

You need to implement IPsec authentication to ensure that only authenticated computer accounts can connect to the members in the domain. The solution must minimize administrative effort.

Which GPOs should you apply to the Domain Controllers OU and the Domain Servers OU? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

17. You have two servers named Server1 and Server2 that run Windows Server. Both servers have the Hyper-V server role installed.

Server1 hosts three virtual machines named VM1, VM2, and VM3. The virtual machines replicate to Server2.

Server1 experiences a hardware failure.

You need to bring VM1, VM2, and VM3 back online as soon as possible.

From the Hyper-V Manager console on Server2, what should you run for each virtual machine?

18. HOTSPOT

What is the effective minimum password length for User1 and Admin1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

19. HOTSPOT

You are planning the migration of APP3 and APP4 to support the Azure migration plan.

What should you do on Cluster1 and in Azure before you perform the migration? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

20. DRAG DROP

You have an on-premises Active Directory Domain Services (AD DS) domain that syncs with an Azure Active Directory (Azure AD) tenant.

The AD DS domain contains a domain controller named DC1. DC1 does NOT have internet access.

You need to configure password security for on-premises users.

The solution must meet the following requirements:

✑ Prevent the users from using known weak passwords.

✑ Prevent the users from using the company name in passwords.

What should you do? To answer, drag the appropriate configurations to the correct targets. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

21. You have a Site-to-Site VPN between an on-premises network and an Azure VPN gateway. BGP is disabled for the Site-to-Site VPN.

You have an Azure virtual network named Vnet1 that contains a subnet named Subnet1. Subnet1 contains a virtual machine named Server1.

You can connect to Server1 from the on-premises network.

You extend the address space of Vnet1. You add a subnet named Subnet2 to Vnet1. Subnet2 uses the extended address space. You deploy an Azure virtual machine named Server2 to Subnet2.

You cannot connect to Server2 from the on-premises network. Server1 can connect to Server2.

You need to ensure that you can connect to Subnet2 from the on-premises network.

What should you do?

22. You are planning the migration of Archive1 to support the on-premises migration plan.

What is the minimum number of IP addresses required for the node and cluster roles on Cluster3?

23. DRAG DROP

You manage 200 physical servers that run Windows Server.

You plan to migrate the servers to Azure.

You need to prepare for discovery of the servers by using Azure Migrate.

Which three actions should you perform in sequence on a physical server? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

24. HOTSPOT

You have two servers that have the Web Server (IIS) server role installed.

The servers are configured as shown in the following table.

Both servers are configured to enable website deployment by using the Web Deployment Tool.

Server1 hosts a website named Site1 that has Web Deploy Publishing configured.

You plan to migrate Site1 to Server2.

You need to perform a pull synchronization of Site1 by using the Web Deployment Agent Service.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

25. You have an Azure virtual machine named VM1 that runs Windows Server.

You plan to deploy a new line-of-business (LOB) application to VM1.

You need to ensure that the application can create child processes.

What should you configure on VM1?

26. You have a server named Server1 that runs Windows Server and has the Hyper-V server role installed. You have a Hyper-V failover cluster named Cluster1. All servers are members of the same domain.

You need to ensure that you use Hyper-V Replica with Kerberos authentication on the default port to replicate virtual machines from Cluster1 to Server1.

What should you do on Server1?

27. Your on-premises network contains two subnets.

The subnets contain servers that run Windows Server as shown in the following table.

Server4 has the following IP configurations:

Ethernet adapter Ethernet:

Connection-specific DNS Suffix . . :

IPv4 Address . . . . . . . . . . . : 192.168.0.10

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.0.1

From Server4, you can ping Server1 and Server2 successfully. When you ping Server3, you get a Request timed out response.

From Server2, you can ping Server1 and Server3 successfully.

The misconfiguration of which component on Server3 can cause the Request timed out response?

28. HOTSPOT

The Default Domain Policy Group Policy Object (GPO) is shown in the GPO exhibit. (Click the GPO tab.)

The members of a group named Service Accounts are shown in the Group exhibit. (Click the Group tab.)

An organizational unit (OU) named ServiceAccounts is shown in the OU exhibit. (Click the OU tab.)

You create a Password Settings Object (PSO) as shown in the PSO exhibit. (Click the PSO tab.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

29. HOTSPOT

You have a failover cluster named Cluster1 that contains the nodes shown in the following table.

A File Server for general use cluster role named HAFS is configured as shown in the General exhibit (Click the General tab.)

30. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a server named Server1 that runs Windows Server.

You need to ensure that only specific applications can modify the data in protected folders on Server1.

Solution: From App & browser control, you configure the Exploit protection settings.

Does this meet the goal?

31. You have three servers named Server 1. Servers and Server3 that run Windows Server. The servers have the Hyper-V server rote installed and are configured in a Storage Spaces Deed cluster named Cluster1.

Cluster1 hosts a virtual machine named VM1 that has Windows Admin Center Installed.

You manage all servers and clusters by using Windows Admin Center.

You purchase an Azure subscription.

You need to configure email alerts in Azure Monitor for the following:

• Disk Capacity Utilization Over 80% for 10 Minutes

• Any critical alert in the cluster system event log

• Memory Utilization over 95% for 10 minutes

• Heartbeat fewer than 5 beats for 5 Minutes.

• CPU Utilization over 85 % for 10 Minutes.

• Any hearth service faults for the cluster

The solution must use the minimum amount of administrative effort.

What should you do?

32. Your network contains an Active Directory Domain Services (AD DS> domain. The domain contains 20

Active Directory sites. All user management is performed from a central site.

You add users to a group.

You discover that group changes do NOT appear on a domain controller in a remote site.

You need to identify whether the group changes appear on other domain controllers.

What should you use?

33. HOTSPOT

You have a Hyper-V failover cluster named Cluster1 at a main datacenter. Cluster1 contains two nodes that have the Hyper-V server role installed. Cluster1 hosts 10 highly available virtual machines.

You have a cluster named Cluster2 in a disaster recovery site. Cluster2 contains two nodes that have the Hyper-V server role installed.

You plan to use Hyper-V Replica to replicate the virtual machines from Cluster1 to Cluster2.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

34. You have an on-premises Active Directory Domain Services (AD DS) domain that syncs with an Azure Active Directory (Azure AD) tenant by using password hash synchronization.

You have a Microsoft 365 subscription.

All devices are hybrid Azure AD-joined.

Users report that they must enter their password manually when accessing Microsoft 365 applications.

You need to reduce the number of times the users are prompted for their password when they access Microsoft 365 and Azure services.

What should you do?

35. DRAG DROP

Your network contains an Active Directory Domain Services (AD DS) domain.

You need to implement a solution that meets the following requirements:

✑ Ensures that the members of the Domain Admins group are allowed to sign in only to domain controllers

✑ Ensures that the lifetime of Kerberos Ticket Granting Ticket (TGT) for the members of the Domain Admins group is limited to one hour

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

36. You have five Azure virtual machines. You have a dedicated Azure Storage account to collect performance data. You need to send the collected data directly to the Azure Storage account.

What should you install on the virtual machines?

37. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a failover cluster named Cluster1 that hosts an application named App1.

The General tab in App1 Properties is shown in the General exhibit. (Click the General tab.)

The Failover tab in App1 Properties is shown in the Failover exhibit. (Click the Failover tab.)

Server1 shuts down unexpectedly.

You need to ensure that when you start Server1, App1 continues to run on Server2.

Solution: From the General settings, you move Server2 up.

Does this meet the goal?

38. You have an Azure virtual machine named VM1.

You install an application on VM1, and then restart the virtual machine.

After the restart, you get the following error message: “Boot failure. Reboot and Select proper Boot Device or Insert Boot Media in selected Boot Device.”

You need to mount the operating system disk offline from VM1 to a temporary virtual machine to troubleshoot the issue.

Which command should you run in Azure CLI?

39. You have a server that runs Windows Server. The server is configured to encrypt all incoming traffic by using a connection security rule.

You need to ensure that Server1 can respond to the unencrypted tracert commands initiated from computers on the same network.

What should you do from Windows Defender Firewall with Advanced Security?

40. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server 2012 R2.

Sysvol replicates by using the File Replication Service (FRS).

You plan to replace the existing domain controllers with new domain controllers that will run Windows Server 2022.

You need to ensure that you can add the first domain controller that runs Windows Server 2022.

Solution: You upgrade the PDC emulator.

Does this meet the goal?


 

Microsoft MB-230 Exam Dumps (V18.02) Online for Preparation: Check MB-230 Free Dumps (Part 3, Q81-Q100) Online Today
Microsoft MS-102 Dumps (V15.03) Ensure You Prepare Well: Check Our MS-102 Free Dumps (Part 3, Q81-Q120) Online

Add a Comment

Your email address will not be published. Required fields are marked *