Introducing the Latest FCP_FSA_AD-5.0 Dumps (V8.02) – 2026 Updated Materials for Your Fortinet NSE 5 – FortiSandbox 5.0 Administrator Exam Preparation

You can pass the Fortinet NSE 5 – FortiSandbox 5.0 Administrator (FCP_FSA_AD-5.0) exam to earn the FCP in Security Operations certification. It primarily tests your understanding of FortiSandbox configuration and operation, with a strong focus on practical, real-world scenarios. When preparing for your FCP_FSA_AD-5.0 exam, a reliable study guide can make all the difference. The latest FCP_FSA_AD-5.0 exam dumps (V8.02) from DumpsBase are designed to help you pass, offering structured, up-to-date exam questions that reflect the real exam’s focus on real-world scenarios, multi-concept problem-solving, troubleshooting, architecture, and best practices. Whether you are reviewing key points during short breaks or simulating full-length exams to build speed and confidence, these FCP_FSA_AD-5.0 exam dumps (V8.02) provide the clarity, accuracy, and strategic direction you need to approach the exam with certainty. With regular updates and clear organization, DumpsBase helps keep your preparation focused, efficient, and effective, so you can walk into the Fortinet FCP_FSA_AD-5.0 exam ready for whatever comes your way.

Read the Fortinet FCP_FSA_AD-5.0 free dumps below to verify the updated materials:

1. A FortiSandbox VM has been deployed and has been functioning correctly for several months. Suddenly, the system begins rejecting file submissions with an error message indicating a licensing problem.

How can you determine, using the CLI, if the license is still valid? (Choose one answer)

vm-status

hc-setting -1

vm-license -1

status

2. To assign a file to a VM image, which two conditions must be true? (Choose two answers)

FortiSandbox must have the appropriate license entitlements.

The VM image clone value must be a non-zero number.

The file type must be configured to enter the job queue.

The VM image must have the software required to open the file.

3. You are asked to create an 802.3ad interface on FortiSandbox with port 2 and port 4. However, when attempting to make the configuration change, you discover that you cannot select port 4 for the aggregate bonding.

What are two reasons for this issue? (Choose two answers)

Port 4 is an administration interface.

Port 4 does not have an IP address.

Port 4 is an api interface.

Port 4 is a sniffer interface.

4. Review the exhibits.









A FortiMail device is integrated with a FortiSandbox device.

What is the expected behavior on FortiMail for emails that require FortiSandbox inspection? (Choose one answer)

FortiMail will queue emails for up to 5 minutes during URL rating errors before submitting URLs to FortiSandbox

FortiMail will queue emails for up to 30 minutes to allow FortiSandbox to finish scanning all attachments and URLs.

FortiMail will not send attachments and URLs to FortiSandbox if their rating exists in the local cache.

FortiMail will deliver all emails to the destination after the emails pass all local security checks.

5. You are asked to create some custom VMs to better represent your security environment. In which two FortiSandbox deployments is this supported? (Choose two answers)

Private cloud

Azure non-nested mode

Device-based

FortiSandbox Cloud

6. You are attempting to troubleshoot a FortiGate device that is not sending samples to FortiSandbox.

Which CLI command will provide you with useful diagnostic information? (Choose one answer)

diagnose antivirus quarantine purge

diagnose test application quarantined 8

diagnose test application ipsmonitor 99

diagnose debug application quarantine -1

7. Which two statements are true about creating an API interface? (Choose two answers)

Ports configured for HA communication can also be configured as API ports.

API ports will not accept HTTP traffic.

The configuration must be performed using the CLI

The interface must also be designated as an administrative interface.

8. Refer to the exhibits.





You are unable to download guest VMs on a new FortiSandbox VM.

What is the reason for this? (Choose one answer)

FortiSandbox is using a private DNS server.

There is no internet connectivity on port1.

There is no internet connectivity on port3.

FortiSandbox does not have the necessary licenses.

9. Refer to the exhibit.





A network topology is shown.

Which two important steps must you take before you enable a BCC adapter on FortiSandbox? (Choose two answers)

Configure the upstream SEG to extract files and URLs from emails and send them to FortiSandbox for analysis.

Configure an A record on the DNS server for the FortiSandbox I

Configure the sub-domain on the upstream SEG to BCC emails to FortiSandbox.

Add an MX record on the DNS server for the BCC email sub-domain to resolve to the FortiSandbox I

10. You must increase the scanning capacity of a FortiSandbox device by increasing the number of clones, but the FortiSandbox local clone limit is already at maximum.

Which two actions can you take to expand the scanning capacity of the unit? (Choose two answers)

Deploy remote WindowsCloudVM and MACOSX clones

Reorganize the scan priority list

Add custom VMs

Add VM licenses to FortiSandbox

11. To allow access to the FortiSandbox GUI the administrator must configure an IP address and a default gateway.

Which two commands must the administrator use to accomplish this task? (Choose two answers)

set default-gw <IP Address>

set api-port port1

set admin-port port1

set port1-ip <IP address>

12. Refer to the exhibit.





As a best practice, where must you rank the FortiClient inputs when configuring the job queue priority on FortiSandbox? (Choose one answer)

Before FortiGate but after FortiMail inputs

After all other input methods

After On-Demand but before FortiGate inputs

Before all other input methods

13. When configuring wildcard administrator authentication, which two account types can you use? (Choose two answers)

LDAP

RADIUS

TACACS

Local

14. You are asked to configure a FortiSandbox HA cluster. Port 4 on the primary and secondary nodes is dedicated for HA-specific communication.

Which command must you use to configure the secondary node? (Choose one answer)

hc-settings -sc -tN -nSecondaryNode -cFSAGrp -p<password> -iport4

hc-settings -sc -tM -nSecondaryNode -cFSAGrp -p<password> -iport4

hc-settings -sc -tP -nSecondaryNode -cFSAGrp -p<password> -iport4

hc-settings -sc -tR -nSecondaryNode -cFSAGrp -p<password> -iport4

15. Refer to the exhibits.













You are asked to configure a FortiSandbox to leverage the real-time anti-phishing (RTAP) feature. After configuring the scan profile, testing shows that URLs are not being submitted to the RTAP service.

What could cause this issue? (Choose one answer)

The URL option is not selected as a Web file type.

The WEBLink file type is not selected in the profile.

The VM scan timeout for URLs should be at least 300 to provide enough time for a FortiGuard response.

The URLs are not designated for active content pre-scan.

16. Refer to the exhibit.





Which command must you use to configure the worker node? (Choose one answer)

hc-worker -a -sI0.50.1.30 -p<password>

hc-worker -a -sI0.25.1.50 -p<password>

hc-worker -a -sI0.75.1.254 -p<password>

hc-worker -a -sI0.25.1.30 -p<password>

17. Refer to the exhibit.





Which command must you use to configure the secondary node? (Choose one answer)

hc-worker -a -s10.25.1.30 -p<password>

hc-worker -a -s10.50.1.30 -p<password>

hc-worker -a -s10.50.1.40 -p<password>

hc-worker -a -s10.25.1.50 -p<password>

18. Which stage of the Cyber Kill Chain does FortiSandbox and FortiClient EMS integration help to block? (Choose one answer)

Deliverya

Weaponization

Reconnaissance

Command and control

19. When using SIMNET, which two inspections cannot be performed with real traffic? (Choose two answers)

AV inspection

Dynamic scan

IP reputation

URL rating

20. You are asked to configure FortiSandbox to use one VM instance for multiple sequential scan jobs without shutting down the instance between each scan job submission.

Which scan profile setting must you enable to achieve this? (Choose one answer)

Adaptive VM scan

VM scan ratio

Parallel VM scan

Pipeline mode

 Loading...