Fortinet NSE4_FGT_AD-7.6 Dumps (V11.02) – The Most Updated Resource for Fortinet NSE 4 – FortiOS 7.6 Administrator Certification Preparation

You can complete the Fortinet NSE 4 – FortiOS 7.6 Administrator certification exam with the most up-to-date NSE4_FGT_AD-7.6 dumps (V11.02) from DumpsBase. They offer comprehensive questions and verified answers, providing an effective preparation solution for achieving Fortinet NSE 4 – FortiOS 7.6 Administrator certification success. There are 87 Q&As in V11.02, carefully aligned with the latest exam objectives and real testing patterns. DumpsBase provides a structured learning experience that helps you quickly identify key topics and focus on the most relevant areas of the syllabus. With frequent updates to ensure accuracy, along with accessible PDF formats for flexible study anytime and anywhere, these NSE4_FGT_AD-7.6 dumps (V11.02) serve as a reliable and efficient resource for both beginners and experienced professionals aiming to strengthen their skills and approach the certification exam with confidence and clarity.

Study NSE4_FGT_AD-7.6 free dumps of V11.02 below to verify the quality:

1. An administrator has configured a dialup IPsec VPN on FortiGate with add-route enabled. However, the static route is not showing in the routing table.

Which two statements about this scenario are correct? (Choose two.)

The administrator must use a policy route instead of a static route for add-route to work properly.

The administrator must ensure phase 2 is successfully established

The administrator must define the remote network correctly in the phase 2 selectors.

The administrator must enable a dynamic routing protocol on the dialup interface.

2. Refer to the exhibit.


As an administrator you have created an IPS profile, but it is not performing as expected. While testing you got the output as shown in the exhibit.

What could be the possible reason of the diagnose output shown in the exhibit?

There is a no firewall policy configured with an IPS security profile.

Administrator entered the command diagnose test application ipsmonitor 5.

FortiGate entered into IPS fail open state.

Administrator entered the command diagnose test application ipsmonitor 99.

3. Which statement correctly describes NetAPI polling mode for the FSSO collector agent?

The collector agent uses a Windows API to query DCs for user logins.

The NetSessionEnum function is used to track user logouts.

NetAPI polling can increase bandwidth usage in large networks.

The collector agent must search Windows application event logs.

4. Refer to the exhibits.









The exhibits show a diagram of a FortiGate device connected to the network, as well as the IP pool configuration and firewall policy objects.

The WAN (port2) interface has the IP address

100.65.0.101/24.

The LAN (port4) interface has the IP address

10.0.11.254/24.

Which IP address will be used to source NAT (SNAT) the traffic, if the user on HQ-PC-1 (10.0.11.50) pings the IP address of BR-FGT (100.65.1.111)?

100.65.0.101

100.65.0.49

100.65.0.149

100.65.0.99

5. Refer to the exhibit.





A partial cloud topology is shown.

You deployed a FortiGate Cloud-Native Firewall (CNF) in AWS.

During the deployment, which components must the FortiGate CNF create to handle traffic from the EC2 instance?

The customer VPC and GWLBe

The gateway load balancer endpoint (GWLBe) in the customer virtual private cloud (VPC)

The CNF VP

customer VP

and GWLB

The GWL

GWLBe, and the internet gateway (IGW) in the customer VPC

6. Refer to the exhibit.


An administrator has configured an Application Overrides for the ABC.Com application signature and set the Action to Allow This application control profile is then applied to a firewall policy that is scanning all outbound traffic. Logging is enabled in the firewall policy. To test the configuration, the administrator accessed the ABC.Com web site several times.

Why are there no logs generated under security logs for ABC.Com?

The ABC Com is hitting the category Excessive-Bandwidth.

The ABC.Com Type is set as Application instead of Filter.

The ABC.Com is configured under application profile, which must be configured as a web filter profile.

The ABC Com Action is set to Allow

7. Refer to the exhibits.













Based on the current HA status, an administrator updates the override and priority parameters on HQ-NGFW-1 and HQ-NGFW-2 as shown in the exhibits.

What would be the expected outcome in the HA cluster?

HQ-NGFW-2 will take over as the primary because it has the override enable setting and higher priority than HQ-NGFW-1.

HQ-NGFW-1 will remain the primary because HQ-NGFW-2 has lower priority

The HA cluster will become out of sync because the override setting must match on all HA members.

HQ-NGFW-1 will synchronize the override disable setting with HQ-NGFW-2.

8. Refer to the exhibit.





What would be the impact of these settings on the Server certificate SNI check configuration on FortiGate?

FortiGate will accept and use the CN in the server certificate for URL filtering if the SNI does not match the CN or SAN fields.

FortiGate will accept the connection with a warning if the SNI does not match the CN or SAN fields.

FortiGate will close the connection if the SNI does not match the CN or SAN fields.

FortiGate will close the connection if the SNI does not match the CN and SAN fields

9. Refer to the exhibit.





Which two statements about the FortiGuard connection are true? (Choose two.)

The weight increases as the number of failed packets rises

You can configure unreliable protocols to communicate with FortiGuard Server.

FortiGate identified the FortiGuard Server using DNS lookup.

FortiGate is using the default port for FortiGuard communication.

10. Refer to the exhibits.













A diagram of a FortiGate device connected to the network VIP object and firewall policy configurations are shown.

The WAN (port2) interface has the IP address

100.65.0.101/24.

The LAN (port4) interface has the IP address

10.0.11.254/24.

If the host 100.65.1.111 sends a TCP SYN packet on port 443 to 100.65.0.200.

What will the source address, destination address, and destination port of the packet be at the time FortiGate forwards the packet to the destination?

10.0.11.254, 100.65.0.200. and 443, respectively

10.0.11.254, 10.0.15.50, and 4443. respectively

100.65.1. 111, 10.0.11.50, and 4443. respectively

100.65.1.111, 10.0.11.50. and 443. respectively

11. Refer to the exhibits.


The system performance output and default configuration of high memory usage thresholds on a FortiGate device are shown.

Based on the system performance output, what are the two possible outcomes? (Choose two.)

Administrators can access FortiGate only through the console port.

FortiGate has entered conserve mode.

FortiGate drops new sessions.

Administrators can change the configuration.

12. Refer to the exhibit


A firewall policy to enable active authentication is shown.

When attempting to access an external website using an active authentication method, the user is not presented with a login prompt.

What is the most likely reason for this situation?

No matching user account exists for this user.

The Remote-users group must be set up correctly in the FSSO configuration.

The Remote-users group is not added to the Destination

The Service DNS is required in the firewall policy.

13. An administrator wants to configure dead peer detection (DPD) on IPsec VPN for detecting dead tunnels. The requirement is that FortiGate sends DPD probes only when there is no inbound traffic.

Which DPD mode on FortiGate meets this requirement?

On Demand

Enabled

On Idle

Usabled

14. Refer to the exhibit.


Which two ways can you view the log messages shown in the exhibit? (Choose two.)

By right clicking the implicit deny policy

Using the FortiGate CLI command diagnose log test

By filtering by policy universally unique identifier (UUID) and application name in the log entry

In the Forward Traffic section

15. Which two statements are correct when the FortiGate device enters conserve mode? (Choose two.)

FortiGate refuses to accept configuration changes.

FortiGate halts complete system operation and requires a reboot to regain available resources.

FortiGate continues to transmit packets without IPS inspection when the fail-open global setting in IPS is enabled.

FortiGate continues to run critical security actions, such as quarantine.

16. When configuring firewall policies which of the following is true regarding the policy ID? (Choose two.)

A firewall policy ID identifies the order of policy execution in firewall policies.

A policy ID cannot be modified once a policy is created.

You can create a policy in CLI with policy ID 0

It is mandatory to provide a policy ID while creating a firewall policy regardless of GUI or CL

17. Refer to the exhibits.


A diagram of a FortiGate device connected to the network, as well as the firewall policy and IP pool configuration on the FortiGate device are shown.

Two PCs. PC1 and PC2, are connected behind FortiGate and can access the internet successfully. However, when the administrator adds a third PC to the network (PC3), the PC cannot connect to the internet.

Based on the information shown in the exhibit, which two configuration options can the administrator use to fix the connectivity issue for PC3? (Choose two.)

In the system settings, set Multiple Interface Policies to enable.

In the IP pool configuration, set end ipto 100.65.0.112.

In the firewall policy, set match-vip to enable using CLI.

In the IP pool configuration, set type to overload.

18. Refer to the exhibit.





Based on this partial configuration, what are the two possible outcomes when FortiGate enters conserve mode? (Choose two.)

FortiGate drops new sessions requiring inspection.

Administrators must restart FortiGate to allow new sessions.

Administrators cannot change the configuration.

FortiGate skips quarantine actions.

19. Refer to the exhibits.













An administrator has observed the performance status outputs on an HA cluster for 55 seconds.

Which FortiGate is the primary?

HQ-NGFW-1 with the parameter memory-failover-flip-timeout setting

HQ-NGFW-2 with the parameter priority setting

HQ-NGFW-1 with the parameter override setting

HQ-NGFW-2 with the parameter memory-failover-threshold setting

20. Refer to the exhibit.


An SD-WAN zone configuration on the FortiGate GUI is shown. Based on the exhibit, which statement is true?

The Underlay zone contains no member.

The virtual-wan-link and overlay zones can be deleted

The Underlay zone is the zone by default.

port2 and port3 are not assigned to a zone.

21. An administrator wants to form an HA cluster using the FGCP protocol.

Which two requirements must the administrator ensure both members fulfill? (Choose two answers)

They must have the same HA group I

They must have the heartbeat interfaces in the same subnet.

They must have the same number of configured VDOMs.

They must have the same hard drive configuration.

22. An administrator manages a FortiGate model that supports NTurbo How does NTurbo acceleration enhance antivirus performance?

For flow-based inspection. NTurbo establishes a dedicated data path to redirect traffic between the IPS engine and FortiGate ingress and egress interfaces.

For flow-based inspection. NTurbo creates two inspection sessions on the FortiGate device.

For proxy-based inspection. NTurbo offloads traffic to the content processor.

For proxy-based inspection. NTurbo buffers the whole file and then sends it to the antivirus engine.

23. Refer to the exhibit.





The administrator configured SD-WAN rules and set the FortiGate traffic log page to display SD-WAN-specific columns: SD-WAN Quality and SD-WAN Rule Name

FortiGate allows the traffic according to policy ID 1 placed at the top. This is the policy that allows SD-WAN traffic. Despite these settings, the traffic logs do not show the name of the SD-WAN rule used to steer those traffic flows

What could be the reason?

SD-WAN rule names do not appear immediately. The administrator must refresh the page.

There is no application control profile applied to the firewall policy.

Destinations in the SD-WAN rules are configured for each application, but feature visibility is not enabled.

FortiGate load balanced the traffic according to the implicit SD-WAN rule.

24. What are two features of FortiGate FSSO agentless polling mode? (Choose two.)

FortiGate uses the AD server as the collector agent.

FortiGate uses the SMB protocol to read the event viewer logs from the DCs.

FortiGate does not support workstation check.

FortiGate directs the collector agent to use a remote LDAP server.

25. Refer to the exhibit.


A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up, but phase 2 fails to come up.

Based on the phase 2 configuration shown in the exhibit, which two configuration changes will bring phase 2 up? (Choose two.)

On BR1-FGT, set Remote Address to 10.0.11.0/255.255.255.0.

On HQ-NGFW. enable Diffie-Hellman Group 2.

On BR1-FGT. set Seconds to 43200

On HQ-NGFW. set Encryption to AES256.

26. Refer to the exhibits.









You have implemented the application sensor and the corresponding firewall policy as shown in the exhibits.

You cannot access any of the Google applications, but you are able to access www.fortinet.com.

Which two actions would you take to resolve the issue? (Choose two.)

Set SSL inspection to deep-content inspection.

Move up Google in the Application and Filter Overrides section to set its priority lot

Add "Google".com to the URL category in the security profile.

Change the Inspection mode to Flow-based

Set the action for Google in the Application and Filter Overrides section to Allow

27. Refer to the exhibit.





A RADIUS server configuration is shown.

An administrator added a configuration for a new RADIUS server While configuring, the administrator enabled Include in every user group.

What is the impact of enabling Include in every user group in a RADIUS configuration?

This option places the RADIUS server, and all users who can authenticate against that server, into every FortiGate user group.

This option places all FortiGate users and groups required to authenticate into the RADIUS server, which, in this case, is FortiAuthenticator.

This option places the RADIUS server, and all users who can authenticate against that server, into every RADIUS group.

This option places all users into every RADIUS user group, including groups that are used for the LDAP server on FortiGate.

28. You have created a web filter profile named restrictmedia-profile with a daily category usage quota.

When you are adding the profile to the firewall policy, the restrict_media-profile is not listed in the available web profile drop down.

What could be the reason?

The web filter profile is already referenced in another firewall policy.

The firewall policy is in no-inspection mode instead of deep-inspection.

The naming convention used in the web filter profile is restricting it in the firewall policy.

The inspection mode in the firewall policy is not matching with web filter profile feature set.

29. A new administrator is configuring FSSO authentication on FortiGate using DC Agent Mode.

Which step is not part of the expected process?

The DC agent sends login event data directly to FortiGate.

FortiGate determines user identity based on the IP address in the FSSO list.

The collector agent forwards login event data to FortiGate.

The user logs into the windows domain.

30. A network administrator is reviewing firewall policies in both Interface Pair View and By Sequence View. The policies appear in a different order in each view.

Why is the policy order different in these two views?

By Sequence View groups policies based on rule priority, while Interface Pair View always follows the order of traffic logs.

The firewall dynamically reorders policies in Interface Pair View based on recent traffic patterns, but By Sequence View remains static.

Interface Pair View sorts policies based on matching interfaces, while By Sequence View shows the actual processing order of rules.

Policies in Interface Pair View are prioritized by security levels, while By Sequence View strictly follows the administrator's manual ordering.

 Loading...