Check Point CCSE R82 156-315.82 Dumps (V8.02) – Latest Study Materials for Check Point Certified Security Expert – R82 Exam Preparation

It’s great that Check Point has upgraded its CCSA and CCSE certifications to R82, aiming to meet the demands of modern technological development. So, take your Check Point Certified Security Expert – R82 (156-315.82) exam to test your advanced knowledge, skills, and hands-on experience needed to deploy, manage, and monitor existing Quantum Security Environments. For you preparing for the 156-315.82 exam in 2026, having the latest 156-315.82 dumps (V8.02) from DumpsBase is essential. We provide high-quality, verified Check Point 156-315.82 exam questions in V8.02, with 100 Q&As in total, mirroring the actual exam format and difficulty. Each question comes with detailed explanations to help you fully understand the concepts, not just memorize answers. Regular practice with DumpsBase helps reinforce key concepts, improve time management, and reduce exam anxiety. Many candidates report significantly higher confidence and success rates after using the 156-315.82 dumps (V8.02).

Verify the latest 156-315.82 dumps (V8.02) by reading the following demos:

1. What is true about the magg1 and Sync interfaces on an ElasticXL Cluster?

magg1 is a bonded interface, Sync is also a bonded interface

magg1 is a secondary interface of the Mgmt Port, Sync is the Sync port

magg1 is a bonded interface, Sync is an individual Sync Port

magg1 is only available in Maestro and is a disabled and unused port in ElasticX

Sync is the Sync Port

2. According to the policy installation flow, the transfer state (CPTA) is invoked by the FWM (Firewall) process which initiates the Transfer/Commit phase. On the Security Gateway side a process receives them and first stores them into a temporary directory .

Which directory for the Transfer is correct for receiving these files?

$FWDIR/state/local/FW1

$FWDIR/state/_tmp/FW1

$FWDIR/state/_tmp/FW-1

$CPDIR/state/_tmp/FWM1

3. Network Feed objects are used as a Source or Destination in Access Control, HTTPS Inspection, and Threat Prevention Policies .

What file formats are supported for download in Network Feed objects?

Flat list only

Flat list and XML

JSON only

Flat list or JSON

4. Where does an administrator need to navigate to in the SmartConsole to carry out a Central Deployment upgrade?

COMMAND LINE

GATEWAYS & SERVERS

MANAGE & SETTINGS

INFINITY SERVICES

5. Which daemon makes the decision if Modern Dump or Legacy Dump should be used during Policy Installation?

FWM (Firewall Management)

CPTA (Check Point Transfer Agent)

CPD (Check Point Daemon)

CPM (Check Point Management)

6. According to the policy installation, the transfer state (CPTA) is invoked by the FWM (Firewall) process which initiates the Transfer/Commit phase. On the Security Gateway side a process receives them and first stores them into a temporary directory .

Which process is true for receiving these files?

FWD

CPD

FWM

RAD

7. The Gateways has to mutually authenticate during the IPSec negotiation phase. There are two methods for this, namely:

Pre-shared secret and PKI Certificate

Kerberos and LDAP

OCSP and Certificate Revocation List

RSA SecurID and Dynamic ID

8. Alice & Bob are concurrently logged in to the SmartConsole under Logs & Servers to check for the IKE “Key Install” between a working VPN Site-to-Site Tunnel between site Alpha and site Bravo .

Which of the following IKE versions are available?

IKE

IKEv1 & IKEv3

IKEv1 & IKEv2

IKEv2 & IKEv4

9. To which directory does CPTA transfer policy files to the Security Gateway?

$FWDIR/state/_tmp/FW1

$FWDIR/state/local/FW1

$CPDIR/state/tmp/FW1

$FWDIR/state/_tmp/FW1

10. When the CPM process does a Modern Dump, what is happening?

CPM is using a new version of Postgre SQL to optimize the policy installation, and allow it to happen faster.

When doing backups in Gaia CPM uses Modern Dump and is able to export the database faster in R8x version than previous versions.

Using pre-generated code does not require further compilation or verification before transfer to the Security Gateway.

CPM can bypass FWM and install updated and new rules directly to the Security Gateway.

11. What is crucial in translating services (destination ports) in a NAT rule?

This can only be accomplished with the Automatic NAT Rule with “Translate Destination on Server Side” enabled

This can only be accomplished with Automatic NAT Rule in conjunction with Bi-Directional NAT

This can only be accomplished with the Automatic NAT Rule with “Automatic ARP Configuration” enabled.

This has to be done with a Manual NAT Rule.

12. Which command will allow an administrator to manually load policy files on the gateway?

fw fetch

fw load

fw install

fw policy

13. What does the CPTA (Check Point Transfer Agent) do?

CPTA communicates with the ThreatCloud to transfer anonymized attack log data and download new signatures.

CPTA transfers the policy files from the Security Management Server to the Security Gateway for policy installation.

CPTA is the agent built into Gaia that downloads new software updates, including JHFAs and major version installation packages.

CPTA is the process that finds and downloads licenses and contracts from the UserCenter to the Security Management Server.

14. When creating a VPN tunnel with a third party product which object should you create in Smart Console to represent the remote side?

Externally Managed VPN Gateway

Gateway

Host

Interoperable Object

15. During the policy installation, the CPM process needs to make a decision for Full Installation Policy or Fast Installation Policy. Depending on the decision the CPM process decides what kind of dump will be used .

Which statement is true for the Fast Installation Policy?

Modern Dump always combines the Legacy Dump in which the pre-verified and pre-generated code is included

Modern Dump files never include the pre-verified and pre-generated code

Modern Dump files are sent to the FWM (Firewall) process, which is responsible for code generation and compilation

Modern Dump files already include the pre-verified and pre-generated code

16. In the Management HA environment how many synchronization methods are supported?

1

4

3

2

17. When installing policy, which process is responsible for Verification / conversion?

CPD

CPM

FWM

FWD

18. What is collision mode in Management HA?

This situation is with two Management Servers - 1st set as Active, 2nd set as Standby

This situation is with three Management Servers - 1st set as Active, 2nd and 3rd set as Standby

This situation is with two Management Servers - 1st set as Standby, 2nd set as Standby

This situation is with two Management Servers - both set as Active

19. What is true regarding the number of involved Management Servers in a Management HA environment?

You can have one Primary Management Server and one or more Secondary Management Server(s).

You can have multiple Primary Management Servers in a Load Sharing Mode HA Environment.

You can have one Primary Management Server and one Secondary Management Server.

You can have multiple Primary Management Servers behind a Load Balancer, such as the Logical Server, but in this scenario, you can only use Round Robin as the Distribution Mechanism.

20. What is Modern Dump?

It’s database dump with information stored without pre-generated code that require further verification but does not require compilation before transfer to the Security Gateway

It’s database dump with information stored with pre-generated code that require further compilation or verification before transfer to the Security Gateway

It’s database dump with information stored without pre-generated code that does not require further compilation or verification before transfer to the Security Gateway

It’s database dump with information stored with pre-generated code that does not require further compilation or verification before transfer to the Security Gateway

21. To form a tunnel IKEv2 uses two exchange types - IKE_SA_INIT and IKE_AUTH. How many packets are transferred between the VPN peer gateways during the two exchanges?

Each exchange involves two messages, making a total of 4 packets.

For a site-to-site VPN on Check Point using IKEv2, the normal exchange is indeed nine packets

9 packets unless legacy peers are included in the VPN community, which uses just 6 packets, 3 per exchange.

6 packets. There are 4 in the SA_INIT exchange because of the Diffie Hellman process.

22. Which statement concerning Network Feeds is most correct?

Network Feeds are the objects manually created in the SmartConsole with a name but no IP address. They are used in security policies and resolve to an IP address locally on each Security Gateway

Network Feeds are generated on external HTTP/HTTPS servers that provides an ability to add custom cyber intelligence feeds into the Access Control engine

Network Feeds are external services like Zoom, Office365. Ips are maintained on the Check Point Cloud and objects are automatically synced with the cloud at regular intervals

Network Feeds are generated on external HTTP/HTTPS servers that are fetched by Security Gateways

23. John wants to execute a command on all members of an ElasticXL Cluster, which command line should he use?

expert

clish

gclish

global api

24. In SmartEvent Settings & Policy App, Severity contains which options?

Informational, Warning, Low, Medium, High

Low, Medium, High

Low, Medium, High, Critical

Informational, Low, Medium, High, Critical

25. Can a VPN Gateway be a member of more than one VPN community?

No, it could be used only in one VPN Community.

Yes, it is possible, but with correct modifications of vpn_route.conf file on each VPN Gateway

Yes, if it doesn’t pair with another VPN Gateway in more than one VPN Community.

Yes, it could be used in more than one VPN Community, if all VPN Gateways are managed with the same Security Management.

26. When it comes to manual synchronization, what statement is true?

You can only initiate a Full Synchronization via Manual Sync.

You can only initiate a Delta Synchronization via Manual Sync.

You can choose whether to perform a Full Sync or Delta Sync when it comes to do a Manual Sync.

Manual Sync is only done at the very beginning to force a Cluster Join after having installed the Secondary Management Server.

27. When a solution is configured with Route-based VPN method what interfaces are used?

The Gaia Portal Web User Interface (WebUI)

Only the internal interfaces, which are included in a special Route-based Domain (Network Group object).

Virtual Tunnel Interfaces (VTI)

External interface with a secondary IP address

28. What is the correct statement about requirement of a JSON configuration file when upgrading a Security Management / Log / SmartEvent Server using CPUSE?

A JSON configuration file is required to upgrade any Check Point device prior to R80.20 when upgrading to R82 or above release

There is no such requirement of a JSON configuration file when using CPUS

The CPUSE upgrade is completely automatic

A JSON configuration file is required only if there is a change of IP address on an of the Security Management / Log / SmartEvent servers

A JSON configuration is always required when upgrading a Security Management / Log / SmartEvent server to R82 or above release

29. What are SmartEvent Features and Capabilities?

300+ Check Point Security Best Practices, Monitoring in real time policy changes, Regulatory standards Best Practices

Full threat visibility, Real-time forensics, Immediate response

SmartDashboards, SmartLogs, SmartEvents

Compliance Reports, Events Logs and Reports, Best Practices Tests

30. Internet Key Exchange (IKE) a standard key management protocol that is used to do what exactly?

Renew both Phase 1 and Phase 2 IPSec keys when they expire.

Renew the Phase 2 key when it expires, after 60 minutes by default.

Update the VPN Domain information and renew expired keys when they expire.

Create the VPN tunnels by, Authenticating peers, agreeing on keys and methods to be used for encryption.

31. During Conversion of the Security Policy, the compiled code is stored in which directory?

In the $FWDIR/state/<Gateway Name>/FW1 directory of the Gateway

In the /etc/fw.boot/modules/ Directory of the Management Server.

In the $FWDIR/state/<Gateway Name>/FW1 directory of the Management Server

In the $CPDIR/state/<Gateway Name>/FW1 directory of the Management Server

32. Which Management Server Process receives an install command if it comes to install a policy?

The CPM process is involved in installing a policy to the gateway.

The CPWD process invokes the install function.

The FWM process is involved in installing the policy.

The FWD process is involved in installing a policy.

33. Alice knows about the Check Point Management HA installation from Bob and needs to know which Check Point Security Management Server is currently in “Active” state. Alice uses the Check Point SmartConsole tool .

Which Check Point Console is needed to lookup for the Management High Availability status?

SmartView Tracker -> Log Search “Mgmt HA Status”

SmartUpdate -> Package Repository -> Management High Availability

Gaia Portal -> Overall View -> Management High Availability

Check Point SmartConsole -> Applications Menu -> Management High Availability

34. Which part of the installation process is responsible for checking potential conflict between rules?

verification

legacy dump

transfer

conversion

 Loading...