Newest JN0-106 Dumps (V9.02) for Junos, Associate (JNCIA-Junos) Exam Preparation – Study Smarter with the Latest Questions and Answers

Now, you need to register for the JN0-106 exam to complete the Junos, Associate (JNCIA-Junos) certification. JN0-105 exam ended on April 5, 2026. DumpsBase has the newest JN0-106 dumps (V9.02), which help you prepare more effectively for the Juniper JNCIA-Junos JN0-106 exam. These JN0-106 dumps (V9.02) contain 65 practice questions that are designed to reflect current exam trends, question styles, and key topic areas, allowing you to focus your study time on what matters most. In one word, DumpsBase JN0-106 exam dumps (V9.02) are a valuable choice. With professionally curated, frequently updated, and exam-focused practice questions, DumpsBase helps you approach the Juniper JN0-106 Junos, Associate (JNCIA-Junos) exam with greater confidence and better preparation.

Juniper JN0-106 free dumps are below, helping you check the quality:

1. Click the Exhibit button.





Which command displays the output in the format shown in the exhibit?

show configuration | display inheritance

show configuration | display set

show configuration

show configuration | display detail

2. Which two statements are examples of exception traffic? (Choose two.)

An IP packet with the Router Alert option set in the IP options field.

SSH traffic to the local Junos OS device.

An IP packet that has the IP precedence CoS bits of 111 in the ToS field.

SSH traffic to a remote server on the Internet.

3. Which command would compare the candidate configuration with the active configuration before committing the changes?

[edit] user@router# show | compare

[edit] user@router# rollback 0

user@router> show configuration | compare rollback 0

user@router> show configuration | compare

4. A network administrator must set up the initial configuration of the out-of-band management interface on a new Juniper router to ensure management traffic is isolated from the default routing table (inet.0).

In this scenario, which configuration step is required to accomplish this task in Junos OS?

Configure an IP address on interface ge-0/0/0.0 and enable ethernet-switching family.

Configure the lo0.0 loopback interface with a management IP and apply it to the [edit system services] hierarchy.

Assign an IP address to the me0.0 interface and set the routing-options to instance-type virtual-router.

Assign an IP address to interface fxp0.0 or em0.0 and use the command set system management-instance to enable the management routing instance.

5. A security policy requires that a user account be created for auditing purposes. This user should only view configuration and operational data without making any changes.

Which predefined login class would satisfy this requirement?

operator

unauthorized

read-only

super-user

6. You are configuring a new router and want to ensure that you can recover from future misconfigurations.

In this scenario, what should you do after completing the initial configuration?

Update the firmware on the router.

Save the configuration as rollback 0.

Create a rescue configuration.

Enable automatic rollback after 10 minutes.

7. Which interface type prefix represents a 10-Gigabit Ethernet interface?

ge

xe

et

fe

8. Your system administrator notified the infrastructure team that all server NICs will be moving to jumbo frames. All of the NICs used by servers are 1 gigabit. The starting frame size will be 4K. The exact frame size may change depending on testing results.

In this scenario, which choice would provide a flexible solution?

Create a group that adjusts MTU size on 1 gigabit interfaces and apply at the interfaces level.

Apply the MTU to each interface family for each 1 gigabit interface.

Set the app-engine compute-cluster Ethernet MTU size for the Junos V

Use the system internet-options path-mtu-discovery to dynamically adjust MT

9. What information would you find using the CLI help command?

a URL for accessing the technical documentation

message of the day

hyperlinks for remediation actions

an explanation for specific system log error messages

10. An administrator wants to set up a remote user authentication service for the many users that access a Juniper security device.

In this scenario, what are two supported authentication protocols? (Choose two.)

RADIUS

TACACS+

SHA

IPsec

11. Click the Exhibit button.





You have configured multiple authentication methods on your Junos device, including RADIUS, TACACS+, and local user accounts.

A user attempts to log in, but the RADIUS server is unavailable.

Referring to the exhibit, which statement is correct?

The user is prompted to select a different authentication method.

The login attempt fails immediately.

Junos will continue to attempt to authenticate with the RADIUS server until it responds.

Junos attempts the next configured authentication method.

12. Which two statements are correct about Junos OS? (Choose two.)

Junos OS provides the ability to run unsigned third-party binaries.

Junos OS provides modularization of software processes.

Junos OS combines security and routing policies.

Junos OS separates the control plane and the forwarding plane.

13. What are two characteristics of IPv6 addressing? (Choose two.)

The IPv6 address is represented by a 128-bit address

The IPv6 header automatically includes a checksum.

IPv6 uses ARP to discover neighboring devices.

IPv6 addresses that begin with fe80 are not routable.

14. You manage a Junos device with 20 interfaces. Each interface requires the same description and MTU setting .

Which configuration approach would reduce repetitive commands and ensure consistency?

Use the wildcard delete command to remove duplicate settings.

Configure each interface individually.

Use a configuration group.

Use search and replace to apply settings across interfaces.

15. You committed a new configuration on a Junos router, but users report connectivity issues. You must quickly restore the previous working configuration without manually editing the candidate configuration.

Which command should you use to load the required configuration into the candidate configuration?

rollback 0

show | compare rollback

rollback 1

load override

16. How many usable hosts are in a /24 subnet mask?

250

254

255

256

17. What are two fiber-optic connector types? (Choose two.)

LC

RJ-45

SC

BNC

18. What are two functions of the Routing Engine? (Choose two.)

It evaluates firewall filters for transit traffic.

It runs Junos O

It processes all management traffic.

It processes transit traffic.

19. Which two statements correctly describe how Junos OS handles control and forwarding functions? (Choose two.)

The Packet Forwarding Engine (PFE) forwards packets based on forwarding tables received from the Routing Engine.

Exception traffic is always dropped by the Packet Forwarding Engine without being inspected.

Transit traffic is processed by the Routing Engine to ensure high-speed packet forwarding.

The Routing Engine (RE) is responsible for maintaining routing tables and running routing protocols.

20. What are two characteristics of transit traffic in Junos OS? (Choose two.)

It includes routing protocol packets.

It is traffic destined for the Routing Engine.

It does not require control plane processing.

It is forwarded by the Packet Forwarding Engine.

21. Which two statements are correct about logical units? (Choose two.)

A physical interface can host multiple logical units.

Logical units can have multiple IP addresses.

Logical units are used only for management interfaces.

A physical interface can host only one logical unit.

22. Which IPv4 address and subnet mask combination represents a point-to-point link with only two usable host addresses?

192.168. 1. 0/30

192.168. 1. 0/29

192.168. 1. 0/24

192.168. 1. 0/28

23. You are creating a new user account using a predefined login class on a Junos device. The account should be able to run operational mode commands such as show interfaces and ping, but should not be allowed to change or commit configuration .

Which login class should you assign to this user?

maintenance

read-only

super-user

operator

24. When troubleshooting a problem, you issue the following commands in sequence:

1. show chassis alarms

2. show chassis fpc

3. show chassis fpc detail

4. show chassis errors fpc-slot 0

In this scenario, what happens when you press the up arrow key twice at the prompt?

The show chassis fpc command is displayed at the prompt.

The show chassis errors fpc-slot 0 command is displayed at the prompt.

The show chassis alarms command is displayed at the prompt.

The show chassis fpc detail command is displayed at the prompt.

 Loading...