HPE1-H05 Exam Dumps (V8.02) Are Reliable with Success Guarantee: Check Our HPE1-H05 Free Dumps (Part 3, Q81-Q120) Online

1. An administrator is using the Data Services Cloud Console (DSCC) to provision storage for a new SQL Server cluster on HPE Alletra Storage MP. Instead of manually selecting the specific RAID level and drive type, the administrator wants to simply specify the workload type ("SQL Server"), the capacity required, and the performance tier ("Mission Critical").

Which specific provisioning methodology within DSCC enables this simplified, SLA-driven approach?

2. A customer is designing a new AI cluster using HPE ProLiant DL385 Gen11 servers equipped with liquid-cooled CPUs. They are concerned about leak detection and automatic shutdown safety.

What component in the HPE Gen11 Direct Liquid Cooling (DLC) solution communicates directly with the iLO management processor to trigger a system shutdown if a coolant leak is detected?

3. You are sizing a new Synergy solution. The customer requires 20Gb of bandwidth per server for their standard LAN traffic and separate physical isolation for their storage traffic. You propose using the HPE Synergy 6820C 25/50Gb Converged Network Adapter.

Which specific Interconnect Module must be paired with this adapter to support its full 50Gb capability?

4. An administrator accidentally pulls the wrong power cable, causing a "loss of redundancy" on an HPE Alletra Storage MP controller node enclosure. The system remains online. However, the "System Health" LED turns Amber.

Which CLI command would you use to identify exactly which Power Supply Unit (PSU) slot has lost input power?

5. 1.A customer has a Synergy frame with two Composer modules. They want to factory reset the entire environment (delete all profiles, logical interconnects, and network definitions) to start a fresh POC, but they want to keep the OS version on the Composers. They select "Factory Reset" from the maintenance console.

What is the critical consequence of this action regarding the Frame Link Modules (FLMs)?

6. An administrator needs to expand the capacity of an HPE Alletra Storage MP B10000 system by adding a new NVMe Drive Enclosure (JBOF). The system is currently online and serving production I/O.

What is the expected behavior when the new enclosure is cabled to the backend switch fabric?

7. You are troubleshooting an HPE Synergy Image Streamer deployment. The "OS Volume" is successfully presented to the compute node, but the server hangs at "iSCSI Boot". You suspect the "Personality" (IP address) was not correctly injected into the image. You want to inspect the log files generated by the personalization scripts inside the OS during the boot attempt.

Since the OS hasn't finished booting, how can you access these logs?

8. You are performing a "Backup from Storage Snapshots" using Veeam Backup & Replication with an HPE Alletra 9000. You want to perform an "Instant VM Recovery" of a 2TB virtual machine directly from the storage snapshot to minimize RTO.

What happens to the storage I/O during this Instant Recovery process?

9. You are attempting to make a configuration change to an uplink set in HPE OneView, but the operation fails with an error stating that the "Logical Interconnect Group (LIG) is inconsistent" with the Logical Interconnect (LI).

What is the correct workflow to resolve this inconsistency and apply the new configuration?

10. You are troubleshooting a multi-node AI training job on an HPE Cray XD system. The job is failing to initialize the distributed communication ring (NCCL) between GPUs. You suspect a physical layer issue with the High-Speed Ethernet (RoCE) fabric.

Which specific diagnostic tool or test suite should you run from the HPE Cray Programming Environment to validate the GPU-to-GPU bandwidth and latency across the fabric?

11. An administrator notices that the "UID" (Unit Identification) LED on the front of an Alletra MP Drive Enclosure is flashing Blue.

What does this specific LED state indicate?

12. You need to create a Read-Only user in HPE OneView who can view "Server Hardware" status but strictly CANNOT view "Storage System" details or "SAN" configurations due to departmental separation policies.

How should you configure this user's permissions?

13. You are diagnosing a severe performance degradation in an AI training cluster utilizing RoCE v2 networking. The issue appears as random latency spikes during the "All-Gather" phase. You inspect the upstream switch and see a high counter for "PFC Storm" and "Head-of-Line Blocking".

What is the specific architectural root cause of this congestion?

14. An onsite technician is troubleshooting an HPE ProLiant DL380 Gen11 server that failed to boot. The technician observes that the "System Health LED" on the front panel is flashing Red at 4Hz (fast blink).

What does this specific LED code indicate?

15. You connect your laptop to the "Service Port" (USB-C or RJ-45 with specific label) on the rear of an HPE Alletra MP Controller Node to perform an initial setup because DHCP is not available.

Which default static IP address should you configure on your laptop's Ethernet adapter to communicate with the service port?

16. A customer is deploying a large-scale NVMe/TCP environment with hundreds of Linux hosts connecting to multiple HPE Alletra Storage MP arrays. They want to avoid manually configuring the IP address of every storage controller on every host (Static Discovery).

Which standards-based component should you deploy to facilitate centralized, automated discovery of the NVMe subsystems?

17. You are reviewing the CPU utilization of an HPE Alletra 9000 controller node during a performance test. You observe that the CPU utilization is consistently near 100%, and latency is rising linearly with increased IOPS.

What conclusion can you draw about the system's state?

18. A customer has a 3-frame Synergy ring managed by a pair of Composer 2 modules. The primary Composer in Frame 1 fails permanently. You insert a replacement Composer 2 module into the same bay.

What is the expected behavior for the system to recover high availability?

19. You are investigating a performance complaint from a VMware administrator. They report that "VM-SQL-01" is sluggish. You log into HPE InfoSight and navigate to the "Cross-Stack Analytics" view for this VM. You observe that the "Host CPU Ready" time is consistently above 10%, while the "Storage Latency" is under 1ms.

What does this specific correlation indicate?

20. A customer wants to migrate a volume from an older HPE Nimble array to a new Alletra 9000 using Peer Motion. The source volume currently has a "Remote Copy" relationship configuring it to replicate to a DR site. When you attempt to add this volume to the migration task, the validation fails.

Why?

21. You are the "Trusted Advisor" for a customer planning to migrate from a traditional 3-tier architecture to HPE GreenLake.

They ask: "How does HPE GreenLake help me reduce the risk of 'Over-provisioning' compute resources compared to my current purchasing model?"

22. You are adding a Linux host to an NVMe-oF group on an HPE Alletra Storage MP. You need to provide the Host NQN (NVMe Qualified Name).

Which of the following represents a correctly formatted NQN?

23. A database administrator asks you to guarantee that their "Month-End Reporting" job will always get at least 5000 IOPS, even if the storage array is under heavy load from backups.

Which QoS feature specifically addresses this need?

24. A customer enables "FIPS Mode" (Federal Information Processing Standards) on their HPE iLO 6. After the reboot, they notice that they can no longer use the "Virtual Media" feature to mount an ISO file from a specific older web server via URL.

What is the likely cause?

25. You are replacing the "System Battery" (CMOS CR2032) on an HPE ProLiant Gen11 server. After replacing the battery and powering on, the system halts with a "Time Not Set" error. You enter the BIOS to set the time.

What other critical security setting stored in NVRAM might have been reset to default or lost, requiring verification?

26. A customer requires a storage solution that supports "100% Availability Guarantee" for a mission-critical banking application. They do not want to manage complex multi-site replication just to get the guarantee; they want it natively within a single array.

Which solution must you propose?

27. A customer is performing a "Remote Copy" replication from an HPE Alletra 9000 to a legacy HPE 3PAR 8000 array. They want to use "Synchronous" mode for zero RPO. The link between data centers is 10Gb Ethernet with 2ms latency. However, the system forces the mode to "Periodic Asynchronous".

What is the compatibility constraint preventing Synchronous replication?

28. A customer is configuring their ESXi hosts to connect to an HPE Alletra 9000 active-active array. They are using the "Round Robin" Path Selection Policy (PSP).

To ensure optimal I/O load balancing and fast failover responsiveness across all active paths, what specific parameter change does HPE recommend for the NMP (Native Multipathing Plugin)?

29. You are troubleshooting a connectivity issue between an HPE Alletra Storage MP system and a Linux host over iSCSI. The host can ping the array's iSCSI target IP address successfully. However, when the host attempts to mount the volume and transfer data, the connection drops or hangs. You suspect an MTU mismatch.

Which command should you run on the Linux host to definitively validate that Jumbo Frames (MTU 9000) are passing correctly end-to-end?

30. You are replacing a failed Controller Node in an HPE Alletra Storage MP B10000 chassis. Before physically removing the node from the chassis, you check the "Unsafe to Remove" LED on the rear of the controller. The LED is currently ON (Solid White).

What does this indicate?

31. A customer plans to add a new "Data Warehouse" workload to their existing HPE Alletra 9000 array. They want to know if the current controller headroom can support this addition without causing latency for existing apps.

Which specific tool within HPE InfoSight allows you to simulate this addition using historical performance models?

32. Which specific data reduction behavior is a characteristic of the HPE Alletra 6000 (CASL) architecture compared to the Alletra 9000?

33. A customer enables "Dedup and Compression" on a volume on their HPE Alletra 9000 array to save space. They write 10TB of unique, pre-compressed video data (MP4) to the volume. They complain that the "Data Reduction Ratio" is still showing near 1:1 (no savings), and they suspect the feature is broken.

What is the technical reason for this?

34. You are managing a Hyper-V cluster profile in HPE OneView. You need to add a new VLAN to all nodes in the cluster. You update the "Logical Interconnect Group" (LIG) to include the new network. After saving, you notice the Logical Interconnect status changes to "Inconsistent".

What action must be taken to make the new VLAN available to the server downlinks?

35. A customer requires a storage solution that specifically supports "Data Reduction without Performance Penalty" for their VDI environment. They have a strict requirement that the solution must use an ASIC-based approach to deduplication to avoid taxing the storage controller CPUs.

Based on this technical requirement, which HPE storage solution is the only valid option to propose?

36. You are managing an environment with four HPE Alletra 9000 arrays. You want to move a critical application volume from Array A to Array B to balance the workload, but you cannot afford any downtime for the host application. You have already configured a Peer Motion Federation.

Which specific Data Ops Manager action allows you to move the volume transparently while the host is online?

37. You are troubleshooting a "Space Full" condition on a Snapshot CPG. You realize that a test script generated thousands of temporary snapshots on a volume, consuming all available copy space. You delete the snapshots in the UI. However, the physical space on the CPG does not return to "Free" immediately.

Why?

38. A customer is extremely concerned about ransomware encrypting their backup data. They want to implement a solution using HPE StoreOnce that ensures backup data cannot be deleted or modified by any user (including administrators) for a set period.

Which specific feature must be enabled and configured to meet this "Compliance Mode" requirement?

39. You are configuring HPE OneView to authenticate users using Two-Factor Authentication (2FA) via Smart Cards (CAC/PIV). You have enabled "Certificate Validation" in the security settings. However, users report that when they present their Smart Card, the login page displays a "Certificate Not Trusted" error.

What configuration step was missed?

40. After replacing the system board on an HPE ProLiant Gen11 server, you attempt to boot the installed Windows Server 2022 OS. The boot process halts immediately with a "Security Violation" or "Invalid Signature" error on the screen. You verify that the OS bootloader is intact.

What setting in the UEFI System Utilities must be updated to resolve this?