HPE1-H05 Exam Dumps (V8.02) Make Your Advanced HPE Compute and HPE Storage Practical Exam Easier: Continue to Check HPE1-H05 Free Dumps (Part 2, Q41-Q80)

1. You are managing an HPE Alletra 9000 array and need to provision a new volume to a cluster of 8 ESXi hosts. You want to ensure that every host maps the volume with the exact same LUN ID to support vMotion.

Which provisioning action guarantees this outcome with the least administrative effort?

2. A customer reports that their HPE Synergy Compute Module is failing to access the SAN storage. You check the Server Profile in OneView and see a critical alert: "FCoE Connection Status: Not Logged In". You check the upstream Cisco Nexus switch and see that the interface is "Up", but no FLOGI (Fabric Login) has been received.

Which specific LLDP setting on the switch port is likely missing, preventing the FCoE initialization?

3. You are acting as a Trusted Advisor for a customer planning their Disaster Recovery strategy. They ask: "What is the recommended RPO (Recovery Point Objective) for our synchronous replication link if the latency spikes to 10ms?"

How should you advise them?

4. A customer is using HPE StoreOnce with "Local Key Management" for Data at Rest Encryption. They experienced a catastrophic hardware failure of the StoreOnce appliance and had to replace the unit. They attached the old disk shelves to the new unit. To recover the encrypted data, they need to restore the "Keystore".

Which file must they have backed up previously to perform this restoration?

5. You are configuring the boot storage for a new HPE ProLiant DL380 Gen11 server. The customer wants to maximize the number of front drive bays available for data storage (VSAN capacity). They also want the boot device to include hardware redundancy (RAID 1) without consuming a PCIe expansion slot.

Which specific boot controller meets these criteria?

6. You are designing a new HPE Synergy solution. The customer wants to utilize "Flat SAN" connectivity to their HPE Alletra 9000 to reduce cost (eliminating Top-of-Rack SAN switches).

Which specific Synergy Interconnect Module supports this direct-connect Fibre Channel capability?

7. A customer initiates an OS upgrade for their Alletra 9000 array via the Data Services Cloud Console. The upgrade fails during the pre-check. The error indicates that the "Outbound Connectivity" to the HPE Cloud is unstable.

Which specific TCP port must be open outbound from the array management port to the HPE GreenLake cloud endpoints?

8. A customer asks for a monthly report detailing the "Power Consumption" history of their Synergy frames to cross-charge departments based on energy usage. They want to export this data to a CSV format.

Which OneView feature provides this specific historical metric capability?

9. You are adding a new HPE Synergy frame to an existing Logical Interconnect Group (LIG) to expand the fabric. The existing frame uses HPE Virtual Connect SE 100Gb F32 Modules. You have some spare HPE Virtual Connect SE 40Gb F8 Modules available and attempt to install them in the new frame to save cost, intending to link them to the same master ring.

Why does OneView block this configuration?

10. A customer wants to reduce their Scope 2 Carbon Emissions. They are viewing the HPE GreenLake Sustainability Dashboard and see a metric labeled "Carbon Intensity" (gCO2eq/kWh). They ask how HPE GreenLake derives this specific value for their on-premises data center.

What is the source of this data?

11. The "Synergy Console" (the pull-out monitor/KVM on the front of the frame) is not functioning. You suspect the "Front Panel Board" battery is dead.

What is the specific function of the battery located on the Synergy Front Panel / Console board?

12. You are integrating HPE iLO 6 with Microsoft Active Directory to enable role-based access for a large group of users. You have configured the Kerberos settings and Directory address. However, when users attempt to log in with their AD credentials, they fail. You suspect the "Schema-free" configuration is incorrect.

Which specific Active Directory attribute must be mapped to the iLO "User Login Name" to ensure successful authentication?

13. You are installing four NVIDIA H100 GPUs into an HPE ProLiant DL380a Gen11 server. When cabling the power for these GPUs, you notice the server uses a specialized power distribution board.

Why is it critical to use the specific GPU power cables provided in the HPE enablement kit rather than standard PCIe cables?

14. A security policy requires that ALL users accessing the HPE GreenLake console must use Multi-Factor Authentication (MFA), regardless of whether they are using SSO or HPE ID.

Where do you configure this global enforcement policy?

15. You are troubleshooting access to a newly provisioned NFS export on HPE GreenLake for File Storage. The Linux client receives an "Access Denied" or "Mount Failure" error. You verify the IP connectivity is good.

Unlike Block storage which uses LUN Masking, what mechanism controls access to this NFS export?

16. A customer wants to view their "Carbon Footprint" trends over the last 12 months for their entire HPE fleet to include in their Annual ESG Report.

Which specific dashboard within the HPE ecosystem provides this historical carbon reporting?

17. A customer wants to logically isolate their "Production" resources from their "Development" resources within the same HPE GreenLake tenant so that developers cannot see or touch production storage volumes.

Which GreenLake construct should you use to create this boundary?

18. A customer is configuring an HPE Alletra 9000 to provide storage for an AI training cluster. The workload consists of "Checkpoints" where all 100 nodes dump their memory state to storage simultaneously every hour. This creates a massive burst of sequential write bandwidth.

Which volume setting should be adjusted to optimize for this specific "Checkpoint" pattern?

19. A customer is performing a "Tech Refresh" migration from an older non-HPE array to an HPE Alletra 9000. They have a physical Oracle RAC database using ASM (Automatic Storage Management). They want to migrate to the new array without using host-based LVM mirroring or reinstalling.

Which method allows the Oracle ASM disks to be migrated online?

20. You are designing a new HPE Synergy solution for a customer who requires the ability to rapidly provision and update operating systems across hundreds of compute nodes using "Golden Images" and stateless computing. You plan to include HPE Synergy Image Streamer.

To function correctly, which specific configuration requirement must be met regarding the Logical Interconnect Group (LIG) and the uplink sets?

21. You have downloaded an "Artifact Bundle" from the HPE repository to update your Synergy environment. You attempt to upload this bundle into the Image Streamer appliance, but the upload fails with a "Signature Verification Error".

What is the most likely cause?

22. In a hands-on task involving HPE GreenLake Central, you need to invite a new user, " [email protected] ", and give her administrative access to only the "Storage" workspace.

Which role assignment strategy achieves this "Least Privilege" requirement?

23. You are configuring "Data at Rest Encryption" on an HPE Alletra 9000 array for a banking customer with strict regulatory requirements. The customer dictates that the encryption keys must be managed centrally by their existing Thales eSecurity key manager, rather than storing the keys locally on the array.

Which encryption key management mode must you configure during initialization?

24. A customer provides a business requirement to "Implement a database solution that guarantees zero RPO across two campus sites connected by dark fiber." You translate this into a technical requirement for "Synchronous Replication."

When configuring the Bill of Materials (BOM) in HPE One Config Advanced (OCA), which specific licensing component must be added to an HPE Alletra 9000 BOM to enable this functionality?

25. A customer wants to ensure that their HPE OneView appliance backups are secure. They enabled "Backup Encryption" in the settings. They are now simulating a disaster recovery scenario where they need to restore this backup file to a newly deployed OneView appliance.

What critical piece of information is required to successfully import and restore this encrypted backup file?

26. In an HPE Synergy environment, the "Frame Link Modules" (FLMs) located in the rear of the frame are responsible for management connectivity.

If you have a multi-frame ring configuration and the "LINK" LED on the Frame Link Module in Frame 2 turns off, what is the immediate impact?

27. A customer needs to decommission a set of HPE ProLiant Gen11 servers that were used for sensitive R&D data. The security policy requires an audit-compliant "Sanitization" of all internal storage and non-volatile memory before the servers leave the facility.

Which iLO 6 feature allows you to automate this complete system wipe with a single action?

28. A customer is running a 3DC (Three Data Center) Peer Persistence solution. Site A (Primary) has failed, and Site B (Secondary) has successfully taken over via Automatic Transparent Failover. Site A has now been physically repaired and powered back on. However, you observe that the Remote Copy links are stuck in "Failsafe" mode, and data is NOT automatically synchronizing back from Site B to Site A.

What is the mandatory manual step required to restore the 3DC ring topology?

29. A customer is comparing connection protocols for their new AI training cluster. They need the absolute lowest possible latency for GPU-to-GPU communication between nodes. Cost is a secondary factor.

Which network protocol and adapter configuration should you recommend over standard iSCSI?

30. You are managing an HPE OneView instance licensed with "OneView Standard" (No "Advanced" licenses purchased). You attempt to use the "Server Profile Mobility" feature to migrate a server profile from a Gen10 blade to a Gen11 blade in the same frame. The operation is blocked.

Why?

31. During a hands-on provisioning task in the Data Services Cloud Console (DSCC), you are creating a new volume for a generic file server workload. You want to ensure the volume is placed on the most cost-effective tier while still meeting basic performance needs.

When using the "Intent-based Provisioning" wizard, which parameter do you adjust to control the Quality of Service (QoS) and placement without manually selecting CPGs?

32. You are troubleshooting a connectivity issue where a server cannot boot from its iSCSI volume on an HPE Alletra 6000. The server and storage are on the same subnet. You verify the iSCSI Initiator Name is correct. However, the array shows the initiator as "Offline". You check the switch logs and see "MAC Address Flapping" errors on the ports connected to the storage array.

What is the likely misconfiguration?

33. You are troubleshooting the initialization of a new HPE Alletra 9000. The initialization wizard fails at the network configuration step. You check the switch port connected to the array's management interface. The port is configured as 100Mb Full Duplex.

Why is this causing the failure?

34. You have installed a new third-party PCIe accelerator card into an HPE ProLiant DL380 Gen11 server. Upon powering on, the server halts POST with a "Security Violation: PCI Device Failed Authentication" error and refuses to boot. The system is configured with "Production Mode" security.

What technology is actively blocking this device?

35. A customer is interested in the "Sustainability" features of the HPE GreenLake platform. They specifically want to identify "Zombie Servers" (servers that are powered on but doing no useful work) to reduce energy waste.

Which metric within the GreenLake Sustainability Dashboard would best help them identify these underutilized assets?

36. You are deploying a rack of HPE ProLiant Gen11 servers equipped with Direct Liquid Cooling (DLC). You need to connect the servers to the rack-level cooling infrastructure.

What is the specific function of the "Rack Manifold" in this solution?

37. A customer is using HPE Synergy Image Streamer. They need to update the "Golden Image" for their ESXi farm to a new patch level. They have created a new Image Artifact.

What is the correct method to apply this new image to the existing Compute Modules without deleting the Server Profiles?

38. You are troubleshooting a performance issue on an AI training cluster. The specific symptom is that the "All-Reduce" collective operation is taking longer than expected. You verify that GPUDirect RDMA is enabled. However, checking the network counters, you see a high rate of "Pause Frames" and retransmissions on the RoCE network.

What is the most likely root cause?

39. You are attempting to apply a Server Profile in HPE OneView to a new HPE Synergy Compute Module. The profile status stays at "Error" with a message indicating "Profile affinity cannot be satisfied." You verify that the server hardware type matches the profile.

What is the most likely underlying configuration mismatch causing this error?

40. You are acting as a Trusted Advisor for a customer using HPE Alletra storage. They are concerned about running out of physical capacity due to aggressive Thin Provisioning. You check the "Capacity" tab in Data Services Cloud Console (DSCC).

What does the "Over-provisioning Ratio" specifically indicate to the customer?