Updated NSE8_812 Dumps (V10.02) Are Available for Your Fortinet Certified Expert Cybersecurity Certification: Right Resource to Guarantee Success

1. A customer's cybersecurity department needs to implement security for the traffic between two VPCs in AWS, but these belong to different departments within the company. The company uses a single region for all their VPCs.

Which two actions will achieve this requirement while keeping separate management of each department's VPC? (Choose two.)

2. Refer to the exhibits.

Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration. Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

A)

B)

C)

D)

3. Refer to the exhibit.

FortiManager is configured with the Jinja Script under CLI Templates shown in the exhibit.

Which two statements correctly describe the expected behavior when running this template? (Choose two.)

4. Refer to the exhibit, which shows a Branch1 configuration and routing table.

In the SD-WAN implicit rule, you do not want the traffic load balance for the overlay interface when all members are available.

In this scenario, which configuration change will meet this requirement?

5. You want to use the MTA adapter feature on FortiSandbox in an HA-Cluster.

Which statement about this solution is true?

6. Refer to the CLI configuration of an SSL inspection profile from a FortiGate device configured to protect a web server:

Based on the information shown, what is the expected behavior when an HTTP/2 request comes in?

7. On a FortiGate Configured in Transparent mode, which configuration option allows you to control Multicast traffic passing through the?

8. An automation stitch was configured using an incoming webhook as the trigger named 'my_incoming_webhook'.

The action is configured to execute the CLI Script shown:

9. You are deploying a FortiExtender (FEX) on a FortiGate-60F. The FEX will be managed by the FortiGate. You anticipate high utilization. The requirement is to minimize the overhead on the device for WAN traffic.

Which action achieves the requirement in this scenario?

10. Refer to the exhibit.

You are deploying a FortiGate 6000F. The device should be directly connected to a switch. In the future, a new hardware module providing higher speed will be installed in the switch, and the connection to the FortiGate must be moved to this higher-speed port.

You must ensure that the initial FortiGate interface connected to the switch does not affect any other port when the new module is installed and the new port speed is defined.

How should the initial connection be made?

11. Which two statements are correct on a FortiGate using the FortiGuard Outbreak Protection Service (VOS)? (Choose two.)

12. Refer to the exhibits.

Exhibit A

Exhibit B

A customer is looking for a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E.

Referring to the exhibits, which two conditions allow authentication to the client devices before assigning an IP address? (Choose two.)

13. Refer to the exhibits.

A customer wants to deploy 12 FortiAP 431F devices on high density conference center, but they do not currently have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy

From the FortiSwitch models and sample retail prices shown in the exhibit, which build of materials would have the lowest cost, while fulfilling the customer's requirements?

14. Refer to the exhibit.

A customer has deployed a FortiGate 300E with virtual domains (VDOMs) enabled in the multi-VDOM mode. There are three VDOMs: Root is for management and internet access, while VDOM 1 and VDOM 2 are used for segregating internal traffic. AccountVInk and SalesVInk are standard VDOM links in Ethernet mode.

Given the exhibit, which two statements below about VDOM behavior are correct? (Choose two.)

15. Which two methods are supported for importing user defined Lookup Table Data into the FortiSIEM? (Choose two.)

16. Refer to the exhibit.

You are operating an internal network with multiple OSPF routers on the same LAN segment. FGT_3 needs to be added to the OSPF network and has the configuration shown in the exhibit. FGT_3 is not establishing any OSPF connection.

What needs to be changed to the configuration to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election?

A)

B)

C)

D)

17. Refer to the exhibit showing the history logs from a FortiMail device.

Which FortiMail email security feature can an administrator enable to treat these emails as spam?

18. A retail customer with a FortiADC HA cluster load balancing five webservers in L7 Full NAT mode is receiving reports of users not able to access their website during a sale event. But for clients that were able to connect, the website works fine.

CPU usage on the FortiADC and the web servers is low, application and database servers are still able to handle more traffic, and the bandwidth utilization is under 30%.

Which two options can resolve this situation? (Choose two.)

19. A remote worker requests access to an SSH server inside the network. You deployed a ZTNA Rule to their FortiClient. You need to follow the security requirements to inspect this traffic.

Which two statements are true regarding the requirements? (Choose two.)

20. Refer to the exhibit.

You have deployed a security fabric with three FortiGate devices as shown in the exhibit. FGT_2 has the following configuration:

FGT_1 and FGT_3 are configured with the default setting.

Which statement is true for the synchronization of fabric-objects?

21. An HA topology is using the following configuration:

Based on this configuration, how long will it take for a failover to be detected by the secondary cluster member?

22. Refer to the exhibit.

The exhibit shows the forensics analysis of an event detected by the FortiEDR core.

In this scenario, which statement is correct regarding the threat?

23. Refer to the exhibit showing an SD-WAN configuration.

According to the exhibit, if an internal user pings 10.1.100.2 and 10.1.100.22 from subnet 172.16.205.0/24, which outgoing interfaces will be used?

24. Refer to the CLI output:

Given the information shown in the output, which two statements are correct? (Choose two.)

25. You are responsible for recommending an adapter type for NICs on a FortiGate VM that will run on an ESXi Hypervisor. Your recommendation must consider performance as the main concern, cost is not a factor.

Which adapter type for the NICs will you recommend?

26. Refer to the exhibits.

An administrator has configured a FortiGate and Forti Authenticator for two-factor authentication with FortiToken push notifications for their SSL VPN login. Upon initial review of the setup, the administrator has discovered that the customers can manually type in their two-factor code and authenticate but push notifications do not work

Based on the information given in the exhibits, what must be done to fix this?

27. Refer to the exhibit containing the configuration snippets from the FortiGate.

Customer requirements:

• SSLVPN Portal must be accessible on standard HTTPS port (TCP/443)

• Public IP address (129.11.1.100) is assigned to portl

• Datacenter.acmecorp.com resolves to the public IP address assigned to portl

The customer has a Let's Encrypt certificate that is going to expire soon and it reports that subsequent attempts to renew that certificate are failing.

Reviewing the requirement and the exhibit, which configuration change below will resolve this issue?

A)

B)

C)

D)

28. Which feature must you enable on the BGP neighbors to accomplish this goal?

29. You are migrating the branches of a customer to FortiGate devices. They require independent routing tables on the LAN side of the network.

After reviewing the design, you notice the firewall will have many BGP sessions as you have two data centers (DC) and two ISPs per DC while each branch is using at least 10 internal segments.

Based on this scenario, what would you suggest as the more efficient solution, considering that in the future the number of internal segments, DCs or internet links per DC will increase?

30. You are troubleshooting a FortiMail Cloud service integrated with Office 365 where outgoing emails are not reaching the recipients' mail What are two possible reasons for this problem? (Choose two.)

31. Refer to the exhibits.

A FortiGate cluster (CL-1) protects a data center hosting multiple web applications. A pair of FortiADC devices are already configured for SSL decryption (FAD-1), and re-encryption (FAD-2). CL-1 must accept unencrypted traffic from FAD-1, perform application detection on the plain-text traffic, and forward the inspected traffic to FAD-2.

The SSL-Offload-App-Detect application list and SSL-Offload protocol options profile are applied to the firewall policy handling the web application traffic on CL-1.

Given this scenario, which two configuration tasks must the administrator perform on CL-1? (Choose two.)

A)

B)

C)

D)

32. Refer to the exhibits.

The exhibits show a FortiGate network topology and the output of the status of high availability on the FortiGate.

Given this information, which statement is correct?

33. A customer is planning on moving their secondary data center to a cloud-based laaS. They want to place all the Oracle-based systems Oracle Cloud, while the other systems will be on Microsoft Azure with ExpressRoute service to their main data center.

They have about 200 branches with two internet services as their only WAN connections. As a security consultant you are asked to design an architecture using Fortinet products with security, redundancy and performance as a priority.

Which two design options are true based on these requirements? (Choose two.)

34. Refer to the exhibit, which shows the high availability configuration for the FortiAuthenticator (FAC1).

Based on this information, which statement is true about the next FortiAuthenticator (FAC2) member that will join an HA cluster with this FortiAuthenticator (FAC1)?

35. Refer to the exhibits, which show a firewall policy configuration and a network topology.

An administrator has configured an inbound SSL inspection profile on a FortiGate device (FG-1) that is protecting a data center hosting multiple web pages-Given the scenario shown in the exhibits, which certificate will FortiGate use to handle requests to xyz.com?

36. You are running a diagnose command continuously as traffic flows through a platform with NP6 and you obtain the following output:

Given the information shown in the output, which two statements are true? (Choose two.)

37. 1.Review the VPN configuration shown in the exhibit.

What is the Forward Error Correction behavior if the SD-WAN network traffic download is 500 Mbps and has 8% of packet loss in the environment?

38. What is the benefit of using FortiGate NAC LAN Segments?

39. You must analyze an event that happened at 20:37 UTC.

One log relevant to the event is extracted from FortiGate logs:

The devices and the administrator are all located in different time zones Daylight savings time (DST) is disabled

• The FortiGate is at GMT-1000.

• The FortiAnalyzer is at GMT-0800

• Your browser local time zone is at GMT-03.00

You want to review this log on FortiAnalyzer GUI, what time should you use as a filter?

40. SD-WAN is configured on a FortiGate. You notice that when one of the internet links has high latency the time to resolve names using DNS from FortiGate is very high.

You must ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work.

What should you configure?