Pure Storage FlashArray Storage Professional Dumps (V8.02) – Reliable Study Resources for Pure Certified FlashArray Storage Professional Exam Preparation

The Pure Certified FlashArray Storage Professional is available to validate your ability to manage Pure Storage FlashArray systems, including installing, configuring, optimizing, and troubleshooting storage solutions to ensure enterprise infrastructure is reliable, secure, and scalable for modern cloud environments. To help you achieve better results in the exam, DumpsBase has released the latest FlashArray Storage Professional dumps (V8.02), offering more comprehensive questions and answers to complete the exam preparation. These Q&As allow you to strengthen your understanding of key concepts, identify weak areas, and improve retention over time. Come to DumpsBase today. Whether you are a first-time candidate or looking to pass the exam quickly, the 2026 FlashArray Storage Professional dumps (V8.02) from DumpsBase provide a smarter, more efficient study path.

Read FlashArray Storage Professional free dumps below to check the quality:

1. If an NFS client can mount the FA File export shares with the IP address, but not the fully qualified domain name, what is most likely causing the issue?

Issue with the Active Directory (AD) controller

Issue with the DNS

Issue with the OpenLDAP

2. Pure Protect //DRaaS is configured with a Business Policy to back up data to AWS. An administrator, with DRaaS Global Admin access, is trying to delete the policy but is unable to do so.

What is restricting the administrator from deleting the policy?

Application groups are currently protected under that policy.

The Business Policy is marked as the Primary Policy.

The administrator also needs DRaaS Cloud Admin access.

3. What is the proper configuration method to connect a volume to multiple hosts?

Connect the volume to a host group.

Connect a volume group to the host.

Connect the volume to each individual host.

4. When is it possible to simulate snapshot policies in the Pure1 Snapshot Policies (SafeMode)?

When a FlashArray has existing snapshots

When a FlashArray does not have existing snapshots

When a FlashArray has an existing saved workload simulation

5. An administrator is running commands to verify NVME/TCP connectivity from the hosts to the FlashArray. They use the command ping -M do -s 8972 <ip_addr> from the initiator and it fails.

What should the administrator do to resolve the issue?

Engage support to enable NVME/ TCP services.

Check the MTU of 9000 is set on each hop to the F

Run the command from the target.

6. What should an administrator configure when setting up device-level access control in an NVMe/TCP network?

VLANs

NQN

LACP

7. What command must an administrator run to use newly installed DirectFlash Modules (DFM)?

pureadmin -- admit-drive

purearray admit drive

puredrive admit

8. An application engineer reports seeing high latency in their application running in a VMware instance.

What is the best method to determine the source of the latency?

Analyze performance in the VM Topology in Pure1 for each component in the user's data path

Analyze performance charts in vSphere for CPU, Memory, Network, and Storage Path for the user's data path.

Analyze load metrics in Pure1 for each volume in the user's data path.

9. What is the proper procedure for stopping asynchronous replication and in-progress transfers?

Removing the volume member from a protection group

Disabling the replication schedule

Disallowing the protection group at the target

10. A storage administrator has presented VMFS datastores from a FlashArray with 10TB of raw capacity.

Why would the administrator see system space when logging in to the FlashArray GUI?

Virtual machines have not yet issued an unmap command.

There is more than 2TB of reclaimable space on the FlashArray.

More than 2TB of volume snapshots were destroyed.

11. An administrator is attempting to add a volume to a volume group but it does not show up in the list of volumes available to move in, even though it does show up in the volumes pane.

Why is the volume missing?

It is already part of another volume group.

It is already part of a Protection Group.

It is protected by SafeMode.

12. What are the two types of FA File quota limits?

File and Block

Limited and Unlimited

Enforced and Unenforced

13. A FlashArray//XL is used for NVMe-RoCE services. The array has been lightly loaded and has performed as expected. A new workload has been added to the array, which is within the array's performance envelope. The change has resulted in extreme latency and service outages for all workloads utilizing NVMe-RoCE.

Which misconfiguration is this a symptom of?

NVMe-RoCE is not supported by the new workload.

Priority Flow Control (PFC) is not configured properly.

The ports are configured with NVMe-RoCE and Replication concurrently.

14. What is the recommended Maximum Transmission Unit (MTU) size for the replication ports on a FlashArray?

4200

1500

9000

15. A storage administrator is tasked with providing real-time data and alerts to the Network Operations Center (NOC) dashboard.

What source should the information come from to provide real-time data?

Pure Performance Monitoring

Pure1

FlashArray

16. A customer with an X50R2 array connected to 110V power is due for an upgrade to the latest controller generation.

What is required to allow this upgrade to proceed?

Call support to schedule a power supply replacement.

Transition the array to DC power.

Switch the array to 220v power outlets.

17. A new array is directly connected to a host with Direct Attach Copper (DAC) cables. The link does not come up.

Which document can be used to help identify the issue?

The FlashArray User Guide

FlashArray Transceiver and Cable Support article

The Port Usage and Definitions article

18. How are in-progress asynchronous snapshot transfers monitored from the UI?

From the replication target

From the either the replication source or target

From the replication source

19. During a test failover using ActiveDR, what content will be presented to the target pod?

The content from the last periodic refresh

The content from the last real fail-over

The content from the undo pod

20. A storage administrator is configuring a new volume and wants to provision 500GB. If the administrator accidentally selects PB, what will happen?

The volume will be created and space will immediately be used.

The volume will be created but a warning will be displayed.

The volume will not be created and a warning will be displayed.

21. An administrator is setting up FA File using the FlashArray GUI. The company is an NFS only shop and needs to configure their remote user authentication.

Which of the following GUI locations should the administrator use to configure access?

Settings > Access > Create Active Directory Account

Settings > Access > Directory Services

Settings > Access > File System

22. A FlashArray is configured to use directory services. A user is a member of the groups associated with both Array Admin and Storage Admin.

What will the user experience when logging into the array?

Inability to login

Storage Admin permissions

Array Admin permissions

23. What major benefit does meta fingerprinting provide for customers?

Provides security for Remote Assist (RA)

Ensures biometric security

Enables predictive support

24. What is the purpose of a Protocol Endpoint volume?

It allows for volumes of the same name within host groups.

It serves as a mount point for vVols.

It is required to set Host Protocol.

25. Which command provides the negotiated port speed of an ethernet port?

pureport list

purenetwork eth list -- all

purehw list -- all -- type eth

26. How would a FlashArray administrator view external latency for write requests for a specific volume?

Health > Network > Select the appropriate protocol > Select the appropriate port

Storage > Volumes > Select the appropriate volume > Details

Analysis > Performance > Volumes > Select the appropriate volume > Deselect "Read" and "Mirrored Write"

27. A FlashArray//C R4 has ports Eth0 and Eth1 connected to a switch using 100Gb/s Direct Attach Copper (DAC) cables. The administrator is unable to configure these ports for iSCSI services.

Why is this occurring?

The ports are designated for Management connectivity.

The DAC cables are not compatible with the array's ports.

The ports are designated for DirectFlash Shelf connectivity.

28. An On-Premises ActiveCluster (AC) Mediator is installed on an ESXi server. The mediator was previously online but when the administrator checked the status of the ActiveCluster (AC) pods the mediator status was listed as "unreachable" for both FlashArrays in the ActiveCluster (AC) pair.

What is a possible cause of the mediator being unreachable from both FlashArrays?

Fibre Channel (FC) zoning or network access has not been created properly for the host.

The mediator does not reside within a Pure datastore.

Outbound TCP port 80 is not allowed from the FlashArrays.

29. Where can a snapshot be copied out to?

A new volume or existing volume

A new volume or new Snapshot

An existing volume or new Snapshot

30. A FlashArray is set up with LDAP authentication. A user is a member of the groups associated with both Array Admin and Storage Admin.

What experience is expected for the user?

User will have Array Admin permissions.

User will not be able to login.

User will have Storage Admin permissions.

 Loading...