F5-CA BIG-IP Certification Prep with F5CAB1 Dumps V9.02 — Updated for 2026

Prepare for your BIG-IP Administration Install, Initial Configuration, and Upgrade (F5CAB1) exam with the most updated dumps today. DumpsBase has updated F5CAB1 dumps to V9.02, offering 49 practice questions and answers as a reliable and up-to-date material for learning. This updated version is aligned with the latest changes of exam objectives, which is carefully curated to match real exam patterns, ensuring that you focus only on relevant content that improves your chances of success.

Key Features of DumpsBase F5CAB1 Dumps 2026

DumpsBase offers features designed to improve the learning experience and strengthen exam readiness:

• Comprehensive study materials aligned with the latest F5-CA syllabus for full topic coverage.
• Realistic practice questions that simulate the BIG-IP Administration exam environment.
• Desktop-based practice software to test your knowledge and track performance instantly.
• Convenient PDF dumps for offline study anytime and anywhere, ideal for busy professionals.

Together, these features make DumpsBase a practical and flexible option for many learners.

Preview F5CAB1 Dumps Quality with 20 Free Practice Questions

The F5CAB1 dumps (V9.02) are regularly updated and structured to cover all key objectives, allowing you to strengthen your knowledge and pass the exam on their first attempt. Before downloading the full version, you can read our free dumps to preview the quality. We have 20 free practice questions, covering key BIG-IP topics such as security, management IP setup, licensing, module provisioning, software upgrades, and HA strategies. They help you review installation, configuration, and upgrade tasks, making them useful for BIG-IP Administration Install, Initial Configuration, and Upgrade exam preparation.

1. An F5 BIG-IP Administrator is asked to report which modules are provisioned on the BIG-IP.

In which two ways can this be done? (Choose two.)

Via the GUI at System → Resource Provisioning → Module Allocation

Via TMSH with show /sys provision

Via the GUI at Statistics → Module Statistics → System

Via TMSH with list /sys provision

2. When using the tmsh shell of a BIG-IP system, which command will display the management-ip address?

run /util bash ifconfig mgmt

list /sys management-ip

show /sys management-ip

3. A BIG-IP Administrator needs to install a HotFix on a standalone BIG-IP device. The device currently has HD1.1 as the Active Boot Location.

The administrator has already reactivated the license and created a UCS archive.

In which sequence should the administrator perform the remaining steps?

Install HotFix in HD1.2, Install base Image in HD1.2, Activate HD1.2

Install HotFix in HD1.1, Reboot the BIG-IP device, Install UCS Archive

Install base Image in HD1.2, Install HotFix in HD1.2, Activate HD1.2

Activate HD1.2, Install base Image in HD1.2, Install HotFix in HD1.2

4. The BIG-IP Administrator received a ticket that an authorized user is attempting to connect to the Configuration Utility from a jump host and is being denied.

The HTTPD allow list is configured as:

sys httpd {

allow { 172.28.31.0/255.255.255.0 172.28.65.0/255.255.255.0 }

}

The jump host IP is 172.28.32.22.

What command should the BIG-IP Administrator use to allow HTTPD access for this jump host?

modify /sys httpd allow replace-all-with { 172.28.32.22 }

modify /sys httpd allow delete { 172.28.31.0/255.255.255.0 172.28.65.0/255.255.255.0 }

modify /sys httpd allow add { 172.28.32.22 }

5. Which port is an exception to the Port Lockdown function of Self-IPs if a device-group synchronization cluster is configured?

TCP 443

TCP 4353

UDP 53

6. Which two items demonstrate the creation of a new volume for software images? (Choose two.)

tmsh install software image /shared/images/BIGIP-.iso volume HD1.5 create-volume

tmsh install /sys software image BIGIP-.iso volume HD1.5 create-volume

Using the GUI, go to System > Disk Management, select New Volume. In the pop-up window, type the name or number of the new volume and click Apply.

tmsh install sys software image /shared/images/BIGIP-.iso volume HD1.5 create-volume

Using the GUI, go to System > Software Management > Available Images > Install, and in the Install Software Image pop-up window, type the new volume name or number and click Install.

7. A BIG-IP Administrator is using Secure Copy Protocol (SCP) to transfer a TMOS image to the BIG-IP system in preparation for an upgrade.

To what directory should the file be transferred?

/shared/images/

/local/images/

/var/images/

8. A BIG-IP Administrator is responsible for deploying a new software image on an F5 BIG-IP HA pair and has scheduled a one-hour maintenance window.

With a focus on minimizing service disruption, which of the following strategies is the most appropriate?

Update the active node first, reboot to the newly updated boot location and verify functionality, then push the update from the active to the standby node and reboot the standby node.

Reset the Device Trust, apply the update to each node separately, reboot both nodes, then re-establish the Device Trust.

Update the standby node first and reboot it to the newly updated boot location, failover to the newly updated node and verify functionality. Repeat the upgrade procedures on the next node, which is now in standby mode.

Update both nodes in the HA pair, then reboot both nodes simultaneously to ensure they run the same software version.

9. An organization is planning to upgrade a BIG-IP system from 16.1.x to 17.1.x.

For a successful upgrade, the Service Check Date must be equal to or newer than the License Check Date required for 17.1.x.

Which command will show the Service Check Date on the BIG-IP system being upgraded?

grep "Service check date" /config/bigip.license

grep "Service check date" /config/bigip.conf

grep "Service check date" /config/svc_chk_date.dat

grep "Service check date" /config/BigD

dat

10. What are the two options for securing a BIG-IP’s management interface? (Choose two.)

Limiting network access through the management interface to a trusted/secured network VLAN.

Block all management-interface administrative HTTPS and SSH service ports to prevent access.

Use the BIG-IP’s Self-IP addresses for administrative access rather than the management interface.

Restrict administrative HTTPS and SSH access to specific IP addresses or IP ranges.

11. For an upgrade of a standalone BIG-IP, a maintenance window is available in which brief interruptions are allowed.

Actions with no impact can be done outside the maintenance window.

When should a license reactivation be performed?

During the maintenance window.

Before the maintenance window.

After the maintenance window.

12. The Configuration Utility of a BIG-IP device is currently accessible via its management IP 10.53.1.245 from all VLANs.

The BIG-IP Administrator needs to restrict access so only hosts from the 10.0.0.0/24 subnet can access the Configuration Utility.

Which TMSH command accomplishes this?

(tmos)# create /net acl MGM

HTTP rule add { (permit tcp 10.0.0.0 0.0.0.255 host 10.53.1.245 http) }

(tmos)# modify /ltm httpd allow replace-all-with {10.0.0.0/24}

(tmos)# create /net acl MGM

HTTP rule add { (permit tcp 10.0.0.0/24 10.53.1.245 http) (deny ip any any http) }

(tmos)# modify /sys httpd allow replace-all-with {10.0.0.0/24}

13. A BIG-IP device is licensed for LTM, ASM, APM, and AFM.

Currently, it will only be used for load balancing and web application firewalling.

To ensure optimal performance and efficient resource utilization, which of the following module provisioning combinations is the best choice?

LTM: Dedicated ASM: Dedicated APM: Minimal AFM: Minimal

LTM: Dedicated ASM: Dedicated APM: None AFM: None

LTM: Nominal ASM: Nominal APM: None AFM: None

LTM: Nominal ASM: Nominal APM: Minimal AFM: Minimal

14. The BIG-IP Administrator wants to manage the newly built F5 system through an in-band Self-IP.

The administrator has configured a VLAN and Self-IP and can ping the IP from their workstation, but cannot access the system via SSH or HTTPS.

What port lockdown settings should the BIG-IP Administrator use to allow management access on the Self-IP? (Choose two.)

The Self-IP port lockdown behavior could be adjusted to Allow Default

The Self-IP port lockdown behavior could be adjusted to Allow All

The Self-IP port lockdown behavior could be adjusted to Allow Mgmt

The Self-IP port lockdown behavior could be adjusted to Allow Management

15. Which configuration file can a BIG-IP administrator use to verify the provisioned modules?

/config/bigip.license

/config/bigip_base.conf

/config/bigip.conf

/var/local/ucs/config.ucs

16. A BIG-IP Administrator needs to verify the state of equipment in the data center.

A BIG-IP appliance has a solid yellow indicator on the status LED.

How should the administrator interpret this LED indicator?

Appliance is halted or in End-User Diagnostic (EUD) mode

Appliance is a standby member in a device group

A warning-level alarm condition is present

A power supply is NOT operating properly

17. A BIG-IP device will be dedicated to functioning as a WAF, requiring only the ASM module to be provisioned.

What provisioning level will ensure that the system allocates all CPU, memory, and disk resources to this module exclusively?

Dedicated

Comprehensive

Maximal

Nominal

18. The BIG-IP Administrator needs to update access to the Configuration Utility to include the 172.28.31.0/24 and 172.28.65.0/24 networks.

From the TMOS Shell (tmsh), which command should the BIG-IP Administrator use to complete this task?

modify /sys httpd allow add { 172.28.31.0/255.255.255.0 172.28.65.0/255.255.255.0 }

modify /sys httpd allow add { 172.28.31.0 172.28.65.0 }

modify /sys httpd permit add { 172.28.31.0/255.255.255.0 172.28.65.0/255.255.255.0 }

19. A BIG-IP Administrator plans to upgrade a BIG-IP device to the latest TMOS version.

Which two tools could the administrator leverage to verify known issues for the target versions? (Choose two.)

F5 End User Diagnostics (EUD)

F5 iHealth

F5 University

F5 Bug Tracker

F5 Downloads

20. An F5 VE has been deployed into a VMware environment via an OVF file.

An administrator wants to configure the management IP address so the VE can be accessed for further setup.

Which two are valid methods for configuring the management-ip address? (Choose two.)

Log into the remote console and configure the management IP by running the config executable.

Log into the remote console and configure the management IP through TMSH using: create sys management-ip /

Log into the remote console and configure the management IP through TMSH using: create ltm management-ip /

Log into the remote console and configure the management IP by running the setup command.

 Loading...

 

Achieve F5CAB1 Certification Success with DumpsBase

Achieving the BIG-IP Administration Install, Initial Configuration, and Upgrade (F5CAB1) certification is now more attainable with the right preparation tools. DumpsBase combines high-quality exam dumps to help you identify weak areas and improve efficiently. With DumpsBase, you can approach the F5CAB1 exam with confidence and clarity.