Updated D-PE-OE-01 Dumps V9.02: Free Practice Questions for Dell PowerEdge Operate v2 Exam

During your Dell PowerEdge Operate v2 exam preparation, you must make sure that your study materials for the D-PE-OE-01 exam are the most updated and reliable. DumpsBase has updated the D-PE-OE-01 dumps to V9.02 with 50 practice questions and answers, which are designed to help you review important exam topics, understand exam-style questions, and strengthen your readiness for the Dell PowerEdge Operate certification. The Dell D-PE-OE-01 exam focuses on skills and knowledge related to operating Dell PowerEdge systems effectively. Updated D-PE-OE-01 dumps (V9.02) help you stay aligned with the latest preparation needs for the Dell PowerEdge Operate v2 exam. Through structured review and repeated practice, you can improve your understanding of PowerEdge server operations, monitoring system health, performing routine maintenance, and resolving issues quickly and effectively.

We have free practice questions below, as D-PE-OE-01 free dumps for checking quality:

1. A Dell PowerEdge R750 server is going into a datacenter with no network connectivity and no KVM.

What is valid way to configure a static IP address for the iDRAC in this situation?

In-band management

iDRAC direct using USB-C port

LOM

LCD Control Panel

2. An Administrator wants to change the PSU configuration In such a way that it can be redundant and can set PSU1 as the primary.

What redundancy policy should the administrator select?

Redundant

PSU2 Redundant

A/B Redundant

PSU1 Redundant

3. You have installed RHEL and reboot the PowerEdge server.

You see this output displayed when the system boots:

Booting from PCIe SSD in Slot 5 Index 0: Red Hat Enterprise Linux

UEFI0073: unable to boot PCIe SSD in slot 5 Index 0: Red Hat Enterprise Linux because of the security

Boot policy.

Boot Failed: PCIe SSD in Slot 5 Index 0: Red Hat Enterprise Linux

Booting from Disk connected to front USB 1: Cruzer Fit

UEFI0073: Unable to boot Disk connected to front USB 1: Cruzer Fit because of the Security Boot policy.

Boot Failed: Disk connected to front USB 1: Cruzer Fit

No boot device available or Operating System detected.

Please ensure a compatible bootable media is available.

Available Actions:

Fl to Continue and Retry Boot Order

F2 for System Setup (BIOS)

Fll for Boot Manager

Which component is the cause of the error?

iDRAC Service Module

BOSS-N1 controller card

Trusted Platform Module

IDM/Personality Module

4. After adding DIMMs on a PowerEdge R760, the server powers on, fans spin, but the system does not reach POST. The LCD shows no error.

What two things should be done to resolve this Issue?

Reseat memory

Replace the system board

Verify DIMM population

Update the BIOS

Clear SEL logs

5. A PowerEdge server is running critical production workloads and has passed all validation and compliance checks. The security team requires that no unauthorized or accidental changes be made to the system configuration during the production phase. Later, the administrator attempts to update the BIOS remotely using iDRAC but the operation fails without applying any changes.

Which is the most likely reason for this behavior?

TPM is blocking the firmware operation

System Lockdown Mode is enabled

Secure Boot is preventing the BIOS update

The RAID controller is in a degraded state

6. You are replacing a network card in a Dell server. The new card has a firmware version lower than the existing part. The Lifecycle Controller Is set to Allow Version Upgrade only under the Part Firmware Update setting.

What will happen to the firmware after replacing the card?

Forces downgrade of existing firmware

Updates the network card firmware

Prevents all firmware updates

7. A Dell PowerEdge server is experiencing intermittent hardware alerts, and the operating system is occasionally unresponsive. An administrator needs to diagnose and troubleshoot the hardware issue efficiently.

Which three tools can be used to troubleshoot hardware issues on a Dell PowerEdge server?

Operating system application logs

LiveOptics

OME

iDRAC

Lifecycle Controller diagnostics

8. You are asked to perform a quick health check across multiple NVIDIA GPUs in a cluster without impacting running workloads.

Which DCGM diagnostic level should be used?

Level 1

Level 2

Level 3

Level 4

9. During a physical Inspection, the System Status LED Is blinking blue.

What does this indicate?

Hardware fault detected

PSU redundancy lost

Thermal threshold exceeded

System is being identified

10. After adding a GPU to a Dell PowerEdge server:

• The operating system does not detect the GPU.

• Lifecycle Controller (LCC) Diagnostics reports a POST failure.

• IDRAC System Event Log shows a GPU power-related error.

What action should be performed first for practical troubleshooting?

Reset the iDRAC network configuration.

Modify the BIOS Thermal Profile.

Reinstall the GPU driver.

Reseat the GPU in its PCIe slot.

11. You are installing an OS remotely using Virtual Media In IDRAC. When you to launch the Virtual Media client, the message: “Virtual media is currently unavailable" appears.

What is the cause of this error?

USB is unreachable

A remote file share session is active

The server is powered off

The ISO file is corrupted

12. Support has requested a SupportAssist Collection to troubleshoot memory Issues with a PowerEdge R770 server. The server is in a co-location data center with limited hours of onsite access.

Which three locations are supported to export a SupportAssist Collection for gathering a full health check on a PowerEdge server?

Local Storage

CIFS Share

SAN Storage

S3 Storage

NFS Storage

13. Your customer requires a way to monitor a high-level and holistic view of the workload of their servers. A database server was identified as providing lower than expected performance after migrating to a PowerEdge R760 server.

Which option can be selected in iDRAC to monitor this level of information?

CPU Utilization

I/O Utilization

Memory Utilization

System Level CUPS Index

14. A technician In Portland, Oregon has been asked to update the firmware on a server in Omaha, Nebraska. They will use an NFS server also located in Nebraska for serving patches that have been vetted by their security teams.

What two pieces of information does the technician need in order to access the NFS patch server from the Lifecycle Controller or iDRAC?

Client IP address

CHAP authentication credentials

Share name

Username and password

15. An engineer needs to install an OS that is not supported by the Lifecycle Controller on a Dell PowerEdge server. Since the OS Deployment menu cannot be used, the engineer plans to proceed with a manual installation.

Which two factors should be considered in this situation?

Appropriate drivers based on storage configuration must be applied.

Required drivers are manually managed during installation.

Hardware compatibility with the OS must be verified before installation.

Firmware and driver version compatibility is checked after installation.

16. A Dell PowerEdge server has Temperature Alert Configuration set up in iDRAC. A Test Event was executed, and email alerts appeared to be delivered successfully. However, a few days later, the server unexpectedly rebooted. Upon inspection, CPU temperatures had exceeded the configured threshold.

What is a possible reason IDRAC failed to alert the administrator about the high temperature?

iDRAC only sends alerts for Critical events or higher.

Although the Temperature Alert was configured, it was not fully activated.

Test Events verify alert delivery but do not trigger actual hardware alerts.

The reboot may have bypassed iDRAC alert mechanisms.

17. A customer reports four physical GPUs installed but only three are detected by the OS on a PowerEdge XE with NVIDIA cards.

Which command should be used to identify the missing GPU?

rocm-smi

nvidia-smi -L

dcgmi diag -r 4

18. You are performing a GPU firmware update using IDRAC. IDRAC Direct was used during the update. The update stalls and the GPU appear unresponsive.

What is the most likely cause of the issue?

The server needs a BIOS downgrade

The USB management port interaction

The iDRAC license expired during the update

The GPU is incompatible with the server OS

19. You are managing PowerEdge Servers in different locations across the globe. Your security team instructed you to apply specific settings and firmware on the BIOS to comply with Company policies. You must ensure these applied settings and firmware do not change or have anomalies overtime.

How could you achieve this?

Use DC-HPM

Use Enterprise Key Management

Use BIOS Live Scanning

Use DC-MHS

Use iDRAC Credential Vault

20. A PowerEdge server running a virtualization workload shows CPU throttling under load, despite sufficient PSU capacity and no hardware faults.

Which configuration is the cause of this issue?

BIOS System Profile set to Performance per Watt

iDRAC NIC set to shared mode

Hyper-Threading enabled

RAID controller cache set to Write-Through

 Loading...