350-601 Dumps (V22.02) Update Check: Free Demo Questions (Part 1, Q1-Q40) for Exam Preparation

It must be great information for 350-601 Implementing and Operating Cisco Data Center Core Technologies (DCCOR) exam students, DumpsBase has updated the 350-601 dumps to V22.02, offering 381 practice questions and answers to help them make preparations. These updated questions cover a wide rage of data center core technologies, including networking, compute, storage networking, automation, and security. Studying from outdated or random materials can waste time and create confusion. However, the most updated 350-601 exam dumps from DumpsBase help you focus on the most relevant knowledge areas and practice with questions that reflect the real exam style. This makes Cisco 350-601 DCCOR exam preparation more organized, targeted, and easier to manage. Here, we have 350-601 free dumps online, helping you check the quality before downloading the full version.

Read Free Demo Questions (Part 1, Q1-Q40) to Check 350-601 Dumps (V22.02) Below:

1. An engineer is implementing the Cisco ACI fabric and must create two different vPCs from leaf switches A and B.

The vPCs are deployed as follows:

• vPC 1 encompasses ports Eth 1 /1 on leaf A and B and connects to server 1.

• vPC 2 encompasses port Eth1/2 on leaf A and B and connects to server 2.

A leaf switch profile listing leaves A and B is already configured.

Which ACI object must be created to meet these requirements?

two vPC interface policy groups

one access port interface policy group

two PortChannel interface policy groups

one vPC interface policy group

2. An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connectivity to the rest of the network needs to be tested from the guest shell of the NX-OS.

Which command tests connectivity from the shell of the NX-OS?

[guestshell@guestshell -]$ ping 173.37.145.84 vrf management

[guestshell@guestshell -]$ chvrf management ping 173.37.145.84

[guestshell@guestshell -]$ iping vrf management Ip 173.37.145.84

[guestshell@guestshell -]$ dohost "ping vrf management 173.37.145.84"

3. A QoS policy on Cisco UCS must meet mese requirements:

- No-drop class must be configured

- Jumbo frames must be enabled without fragmentation.

Which configuration must be implemented to meet mese conditions?

Configure Platinum System class and specify an MTU value of 9100 bytes.

Configure slow-drain timers and specify an MTU value of 9100 bytes.

Create a Flow Control Policy and specify an MTU value of 9000 bytes.

Create a QoS system class and specify an MTU value of 9216 bytes.

4. What is a feature of NFS?

role-based access control

Kerberos-based security model

block-based file access

zone-based

5. Which configuration must be used to boot a Cisco UCS C-Series Server using iSCSI?

Configure eth0 as an initiator and configure the VLAN as a trunk.

Set up eth1 as the target and use the remote IQ

Configure a vNIC as an initiator and target using the IQN and LUN I

Implement an iSCSI adapter using the initiator IQN name.

6. What is a characteristic of the NFS protocol?

It is used for booting Cisco UCS B-Series servers.

It is used to access a storage array at a block level.

It uses UDP and HTTP as its transport.

It uses remote procedure calls with TCP/IP for transport.

7. A company must security harden its Cisco UCS C-Series servers.

The security policy requires all out-of-band management to meet these requirements

✑ It must encrypt all traffic

✑ It must use nondefault ports

✑ It must provide private administrative sessions.

Which Cisco IMC configuration meets the requirements?

Option A

Option B

Option C

Option D

8. A service profile in Cisco UCS Manager must be configured with these requirements:

Cisco UCS Manager must identify the interfaces on the VMware ESXi host that connect to the Cisco ACI fabric switches.

The vNIC must support traffic management when congestion occurs.

Which two policies meet these requirements? (Choose two.)

vNIC/vHBA Placement

Network Control

Serial Over LAN

LAN Connectivity

QoS

9. An engineer must tune an FCIP connection over WAN between two Cisco MDS 9000 Series Switches The customer has determined that default TCP parameters do not function for the link with 300 ms latency.

The TCP profile must Modify the TCP retransmit time to satisfy the WAN latency.

Set the TCP keepalive timeout to 15 seconds.

Set the maximum number of TCP retransmissions to 5

Which command set meets the requirements?

Option A

Option B

Option C

Option D

10. An engineer is implementing VSAN 10 on multiple Cisco Nexus 5600 Series Switches and must ensure that the full zone set and active zone set are identical across the fabric.

Which configuration must be implemented to meet this requirement?

switch(config)# zoneset distribute vsan 10

switch(config)# zoneset activate name ZONE10 vsan 10

switch(config)# zoneset distribute full vsan 10

switch(config)# zone-attribute-group name ATTR1 vsan 10

11. Refer to the exhibit.









A network engineer must implement VXLAN between two core switches called CORE_2 and CORE_3. The core switches must have multicast disabled. In addition, the VLAN 100 called APP and VLAN 200 called DB must be extended between the core switches. The initial VXLAN configuration has been completed on CORE_2.

Which Network Virtual Interface configuration completes VXLAN configure?

A):





B)





C)





D)

Option A

Option B

Option C

Option D

12. Refer to the exhibit.





SVR-A in EPG-A/BD-A fails to reach SVR-B in EPG-B/BD-B.

Which two conditions should be verified to analyze the traffic between the two EPGs? (Choose two.)

A contract exists between EPG-A and EPG-B and allows the traffic.

Limit Endpoint Learning is disabled on the bridge domain for EPG-

SVR-B is learned as an endpoint in EPG-B from Node-112.

EPG-A and EPG-B are excluded from the preferred group.

The bridge domain for EPG-B floods ARP packets.

13. DRAG DROP

Drag and drop the steps on the left onto the order that they must be implemented on the right to recover a fabric interconnect when there is no working image on the boot flash.

14. DRAG DROP

Refer to the exhibit.


An engineer must provision a VXLAN deployment The OSPF has already been configured as the underlay protocol All BGP configurations will be performed using the template method.

The deployment must meet these requirements

✑ The local update source for leaf switches must be loopback 1

✑ The router ID must be the local loopback IP address

✑ The external BGP connections must use a template name

Drag and drop the configuration snippets from the bottom to complete the configuration

15. Refer to the exhibit.





A network engineer must retrieve the network interface name from a JSON object. The engineer loads the JSON into a Python dictionary named json_object.

Which code snippet completes the Python script?

Option A

Option B

Option C

Option D

16. Which two protocols are used by the NFSv4 protocol? (Choose two.)

FCP

TCP

UDP

Ethernet

IP

17. A Cisco UCS user called "Employee1" accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies.

Which action must be taken to meet these requirements?

Modify the privilege level assigned to the user.

Define a custom user role and assign it to users.

Assign the user "Employee 1" the network-operator role.

Assign users to a specific Cisco UCS locate.

18. A network engineer needs to configure system logging on the Cisco MDS Series Switch. The messages must be displayed with the severity level of "warning" and above. For security reasons, the users must be logged out of the console after 5 minutes of inactivity.

Which configuration must be applied to meet these requirements?

Option A

Option B

Option C

Option D

19. AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to 1500 and then generable a massage.

What configuration will accomplish this task?

A)





B)





C)





D)

Option A

Option B

Option C

Option D

20. What is an advantage of NAS compared to SAN?

It provides lossless throughput

It functions in an existing IP environment

It offers enhanced NFS features

It offers enhanced security features.

21. An engineer needs to install a new package on a Cisco Nexus 9000 Series Switch.

What is the impact of running the install commit <filename> command on the switch?

The previous package that was n use is deleted from bootflash.

The package is used in the running configuration

The package is used after the switch is restarted

The switch is restarted after the upgrade is complete

22. What is the DHCP snooping bindings file shown here used for by the Cisco Nexus 9000 Series Switch?

to retain the DHCP bindings configuration across reboots

to authenticate the users permitted to make the changes to the DHCP snooping feature

to retain the DHCP server configuration across reboots

to permit the users from the IP addresses listed to make changes to the DCHP configuration

23. Refer to the exhibit





An engineer must create a Python script to convert a Python dictionary called dic to a YAML format and add the output to a file called switches.yml.

Which line must be added to complete the script to meet these requirements?

Option A

Option B

Option C

Option D

24. Refer to the exhibit.





An engineer monitors ingress traffic from Host-A and all traffic for VLAN 20 from Host-B.

Which configuration must be implemented to monitor and export traffic to Network Analyzer?

Option A

Option B

Option C

Option D

25. DRAG DROP

Drag and drop the keywords onto the URL request to collect all the subnets configured under tenant Production using a REST API. Not all options are used.

26. An engineer is implementing a Cisco ACI fabric and must use static VLAN range as part of a VMM deployment. The static VLAN must be incorporated into the dynamic VLAN pool. The existing VLAN pool is set for dynamic allocation.

Which action accomplishes this goal?

Add the VLAN to the pool configured with Inherit Allocation Mode from parent.

Change the existing VLAN pool to static allocation mode.

Add a static VLAN allocation range to the VLAN pool.

Create a static reservation within the dynamic VLAN pool.

27. DRAG DROP

Drag and drop the hyperflex characteristics from the left onto the appropriate. HyperFlex Node types on the right. Not all options are used.

28. An engineer must Implement a Python script to manage Cisco Application Centric Infrastructure (ACI) and endpoint groups.

Which Python libraries must be used to parse responses and send requests to Cisco ACI?

Element Tree and SSL

JSON and EtementTree

JSON and requests

socket and JSON

29. Refer to the exhibit.





A Cisco data center environment is implemented with vPC. The web server replies using the SVI MAC address as the Layer 2 header instead of the HSRP MAC address on VLAN 23. This behavior causes packet drops on the Cisco Nexus 9000 Series Switches due to the vPC loop prevention mechanism The requirement is for the vPC feature to allow N9K_1 and N9K_2 to forward traffic between the NAS server and the web server, even if the HSRP's MAC address is not used on Layer 2 headers for VLAN 23.

Which feature must be used to accomplish this goal?

Peer Gateway

ARP Sync

L3 Peer Router

Object Tracking

30. Refer to the exhibit.





Users report SAN traffic packet loss on a blade server that is managed by using Cisco UCS Manager. An engineer must implement a SPAN feature to an external Fibre Channel analyzer.

Which configuration source in the TEST monitoring session must the engineer select?

all the storage ports

all the virtual host bus adapters from the server

all the uplink Fibre Channel ports

all the VSANs from the server

31. An engineer must replace a defective fabric interconnect with the same model. The system must be restored, including the database of locally created users. The equivalent Cisco UCS Manager software version must be used.

Which backup type must be used to meet these requirements?

All Configuration

Logical Configuration

System Configuration

Full State

32. An engineer needs to connect Cisco UCS Manager to an external storage array. Due to budget limitations, the engineer must connect a Cisco UCS manager directly to an FC storage port.

Which two actions must be taken to complete this connection? (Choose two)

Configure the fabric interconnect in FC switch mode

Create a storage connection policy

Set FC zoning to disabled when creating the VSAN

Configure the fabric interconnect m end-host mode

Create the required VSAN in the SAN cloud

33. Refer to the exhibit.





An engineer must perform an initial configuration of VXLAN Tunnel End-Point functionality on the Cisco Nexus 9000 Series platform All the necessary features are already enabled on the switch.

Which configuration set must be used to accomplish this goal?

Option A

Option B

Option C

Option D

34. Refer to the exhibit.





An engineer is troubleshooting a connectivity issue for a VM with MAC address 00:50:56:88:10:14 running on me cisco UCS-8 Series blade in VLAN 10. Cisco DCS Manager is connected to a Cisco nexus 9000 Series switch over port channel 10. Currently, the VM Is unreachable from any source that Is outside of me Cisco UCS domain.

Which action must be taken to allow the VM to be readable?

Allow VLAN 10 In the VPC peer link between the Cisco Nexus switches

Allow VLAN 10 In the vSwitch at the hypervisor level.

Allow VLAN 10 In a trunk between the Fabric interconnects and the Cisco Nexus snitches.

Allow VLAN 10 In a trunk between the IOM and the Fabric Interconnects.

35. What occurs when running the command install deactivate <filename> while a software maintenance upgrade is performed on a Cisco Nexus 9000 Series switch?

The current set of packages is committed.

The package is removed from the switch.

The package features for the line card are disabled.

The current upgrade stops.

36. DRAG DROP

Refer to the exhibit.


The server is sending traffic to the storage server using Fiber Channel protocol. The requirement is for the N5K-1 to forward traffic to MDS9k-1.

Drag and drop the configuration steps from the right to complete the configuration for N5K-1 on the left. Not all configuration steps are used.

37. DRAG DROP

Refer to the exhibit.


The VSAN 4041 and 4042 are exchanged between two Cisco MDS 9000 Series Switches called MDS-1 and MDS-2 The objective is to deploy a security mechanism on MDS-1 to allow MDS-2 to join the fabric exclusively.

Drag and drop the code snippets from the bottom onto the boxes in the code to complete the MDS-1 configuration Not all code snippets are used.

38. Which command must be run before downgrading a Cisco Nexus 9300 Series Switch?

Option A

Option B

Option C

Option D

39. Refer to the exhibit.





An engineer implements an FCoE Unified Fabric where vPC exists between N9K-A and N9K-B. To avoid rate discards, bandwidth must be regulated to account for sent traffic that exceeds the access speed.

Which set of commands completes the configuration?

A)





B)





C)





D)

Option A

Option B

Option C

Option D

40. Refer to the exhibit.





An engineer implements SPAN configuration on an Nexus 5000 series switch.

Which two commands are necessary to complete the SPAN session configuration? (Choose two)

Configure the switchport mode SD under interface fc2/1.

Configure switchport speed 4000 under interface fc2/2

Configure the switchport monitor under interface fc2/2.

Configure the switchport mode SD under interface fc2/2.

Configure session type fc under monitor session 1.

 Loading...