F5 ASM 303 Free Dumps (Part 2, Q41-Q80) of V8.02 Are Online – The Latest 303 Exam Dumps for Your Bright Future

Passing your F5 BIG-IP ASM Specialist Exam (303) will open doors to high-demand roles in network security and application delivery. DumpsBase will help you achieve success. Our 303 exam dumps (V8.02) contain the latest exam questions and answers, helping you validate advanced skills in securing applications with F5 BIG-IP Application Security Manager (ASM). You can read our F5 ASM 303 free dumps (Part 1, Q1-Q40) of V8.02 to verify the quality. After reading these sample questions, you will trust DumpsBase F5 ASM 303 exam dumps. They are carefully reviewed by certified professionals and cover every topic in the current exam blueprint with accurate, in-depth explanations. Today, we will share more sample questions in the second part to help you test the quality of the F5 303 exam dumps before buying.

Below are our F5 303 free dumps (Part 2, Q41-Q80) of V8.02 for reading:

1. A pool with a default connection limit is configured to use Round Robin as the load balancing method. An LTM Specialist needs to ensure that the LTM device selects a server with the fewest number of connections when new clients connect. Another pool is using the same set of backend servers.

Which load balancing-method should the pool be changed to?

Weighted Least Connections (node]

Weighted Least Connections (member)

Least Connections

Least Connections

2. An unwanted IP address tries to connect to the configuration utility via Self IP An LTM Specialist needs to block the attempts based on the IP address.

How should the ITM Specialist block the attempts without affecting other users?

SSH IP allow list

Port lockdown

Device trust

Packet filter

3. An LTM is configure an application that is separated into several subdomains across multiple virtual servers. Many of these subdomains require encryption and could be accessed by anyone on the internet. The configuration must NOT result in SSL warnings to end users.

How should the LTM Specialist configure the SSL profiles for these virtual servers?

Obtain an SSL certificate for each subdomain, make a Server SSL profile for each subdomain, and apply to the related SSL Virtual Server.

Obtain a wildcard certificate, create one Client SSL profile and apply to all SSL Virtual Servers

Create a self-singed SSL certificate for each subdomain make a Client SSL profile for each subdomain, and apply to the related SSL Virtual server

Create a self-singed SSL certificate for each subdomain make a Client profile for each SSL Virtual Server

4. An LTM Specialist needs to configures virtual server that uses PVA or OPVA.

Which virtual server type should be used?

Stateless

Performance (HTTP)

Standard

Performance (Layer 4)

5. Exhibit.





- The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)

- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)

- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.

- Device GROUP X has four Traffic Groups A.B.C and D configured.

- Device Group Y has four Traffic Groups E, F. G, and H configured

- Auto Fallback IS NOT Enabled.

- Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.

The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.

What is the state of each Traffic Group on each ITM device after power is restored?

A)





B)





C)





D)

Option A

Option B

Option C

Option D

6. A virtual server configuration for traffic destined to a server is as shown:





FTP traffic is destined to the 192.168.1.101 server from the source of 192.168.2.129.

Based on precedence, which virtual server accepts this traffic?

MyVS4

MyV53

MyVS1

MyVS2

7. A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept

DNS over TCP.

The configuration of the virtual server is as follows:





Which action should be taken to correct this issue?

create a new virtual server with the service port of 53 and the protocol set to TC

change the profile set on the virtual server To TCP/UDP

change the profile set on the virtual server to TCP

add a TCP prone to the existing virtual server.

8. An organization’s development team creates an application to put behind the F5 LTM device. The application can be quite load intensive at first, and then evens out over time. The team’s load balancing method needs to select a pool after taking into account the pool member’s response over the time to avoid landing on a busy pool member.

Which of the following load balancing methods meets this requirement?

Fastest (application)

Predictive (member)

Dynamic (node)

Observed (member)

9. An LTM Specialist is configuring a new virtual server on an LTM device and assigning a SNAT pool that is already is use another virtual server. Both virtual servers use the same pool members to load balance traffic. A maximum of 35,000 users needs to be able to access each virtual server ta any time. The network architecture does NOT allow the backend servers to use the LTM device as a default gateway.

What is the minimum number of SNAT addresses required in the SNAT pool to meet the needs of the virtual servers?

2

3

4

1

10. Refer to the exhibit.





An LTM Specialist has multiple SNAT and virtual server objects configured as in the bigip.conf shown.

The LTM Specialist tests a connection from a client with. IP 172.163.31.11 to 192.168.0.100:80.

Which two objects will show an increase in Local Traffic statistics connections?

VS_A&SNAT_B

VS_B&SNAT_B

VS_ B & SNAT A

VS_A & SNAT A

11. An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.

TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.

TLS enabled virtual servers utilize certificates based on 2048-bit keys

During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.

What will happen in this scenario?

560 new TLS transactions will be silently discarded due to the SSL TPS license limit

Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit

2060 new TLS transactions will be silently discarded due to the SSL TPS license limit

Nothing: 2560 TLS transactions per second is within the SSI TPS license limit.

12. The picture belongs to static content, you can configure static content cache in FS to meet this demand An LTM Specialist must configure session persistence for a highly available, highly utilized web-based application.

* The following requirements are provided:

* http proxy setup for security

persistence information available to the HA peer in case of failover

The LTM Specialist needs to minimize additional burden on the LTM device to the greatest extent possible.

Which persistence profile should be used?

Cookie insert

Universal

Source Address Affinity

Destination Address Affinity

13. An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP.

Which two custom TCP monitors should be selected as the pool's health monitors' (Choose two)

a custom TCP monitor that works on port 9080 with 10.10.10.100 as alias address

a custom TCP monitor that works on port 9080,

a custom TCP monitor that works on port 8080

a custom TCP monitor that works on port 9080 with 10,10.10.101 as alias address

a custom TCP monitor that works on port 8080 with 10.10.10.101 as alias address

a custom TCP monitor that works on port 8080 with 10.10.10.102 is alias address

14. An LTM device receives a response string containing "error"

Which monitor type and parameter will mark the HTTP server as down?

HTTP monitor, Receive String "error", and set the Reverse option to Yes

HTTP monitor and Receive String "error'' ... flag is up

HTTP monitor. Receive String "down", and set the Reverse option to Yes .... flag is

HTTP monitor and Receive Disable String "error'' .... flag is disable

15. An LTM Specialist needs to create a virtual server to pass TCP traffic to three pool members.

Which two virtual server types should be used to meet the requirements? (Choose two)

Performance (Layer A)

Standard

Forwarding (IP)

Stateless

Forwarding (Layer 2)

16. An LTM Specialist needs to create two virtual servers.

The application has links for both HTTP and HTTPS version of application. The client must be persistence to a pool member, no matter which virtual server is accessed.

What must be selected in the Source Address Affinity persistence profile?

Match across Virtual Servers

Match across Pool Members

Match across Services

Match across Polls

17. A custom TCP application using a single server is being migrated to the LTM device. A server is being added to the pool. The application is known to violate the TCP protocol RFC. The application currently works without error from a user perspective.

Which virtual server type is appropriate in this situation?

Stateless TCP protocol is not applicable

Performance (Layer 4)-pure layer A forwarding

forwarding (Layer 2) pure routing forwarding, pool cannot be specified

Standard-tcp profile exists, RFC verification will be performed

18. A virtual server with SNAT automap enabled selects pool member 10.20.0.10.443 for the server-side flow. The client side flow source IP is 192.168.0.10.





Which source IP should be expected in the server-side connection?

10.20.0.1

10.50.0.2

10.20.0.2

192.168.0.10

19. RADIUS authentication has been configured on the LTM device.

The default remote user access requirements are as shown:

Read only access to the configuration Utility

Access to TMOS shell

Which two items need to be configured in this situation? (Choose two)

Console access is Advanced Shell

Console access is Read Only

Default remote user role is Guest

In Console access is TMSH

Default remote user role is Manager

Default remote user role is Operator

20. An HTTP monitor is created and assigned to a pool with the following non-default configuration:

Interval: 7 seconds

Timeout: 22 seconds

Reverse: Yes

Send String: GET/status.html HTTP/1.1/r/nHost:test.example.com/r/nConnector:Close Receive

String: Up

The HTTP server sends the following response:





What is the resulting pool status?

Unavailable (Enabled) Available (Enabled)

Offline (Enabled)

Unknown (Disabled)

21. An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections. The virtual server is accepting connections on https and is configured with an SSL profile and http pool.

What should be added to increase the performance of the device?

an HTTP Compression profile

a One Connect profile

smaller key to the SSL profile

a SPDY profile

22. An LTM specialist needs to upgrade a VCMP quest in an HA Setup with minimum interruption for all VCMP guest instances.

In which should the LTM Specialist perform this upgrade?

Relicense the host. Failover all guest’s active traffic-groups to the other host, copy image to gest, create guest UCS install and set boot location to new volume, reboot

Failover this specific guest’s active traffic-group to the other Host, Relicense the guest, copy image to guest, create guest UCS, install and set boot location to new volume, reboot

Failover all guests’ active traffic-group to the other Host, Relicense the host, copy image to guest, create guest UCS, install and set boot location to new volume, reboot

Failover all guests’ active traffic-group to the other host, copy image to guest, create guest UCS install and set boot location to new volume, reboot, Relicense the host

23. An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.

Which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)

configure a serial failover cable for mirror traffic

configure a One Connect profile to mirror connections

configure a VLAN and primary mirroring address for mirror traffic

enable Mirroring for a virtual server and persistence profile

enable Clone Pools for a virtual server and a persistence profile

24. Refer to the exhibit.





An LTM Specialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.

Which command sill correct the issue?

{/Common)(tmos) # modify /syssyslog remote-servers modify (syslog_dest2 {local-ip

{/Common)(tmos) # modify Ays syslog remote servers modify {syslog_dest2 {local- ip 10.208.102 254)}

{/Common) (tmos) # modify /sys syslog remote-servers modify {syslog_dest2 {host 10 208.102.254 }}

{Common(tmos) # modify/syslog remote-servers modify {syslog_dest2 {lost.10.10.10.28 }}

25. AN LTM Specialist is using an external monitor evaluate the hard drive usage of a node. The monitor has marked the node down because it exceeded the specific threshold. The disk usage on the server has been corrected below the threshold, however, the node remains offline.

Which feature is causing this problem?

The parameter Time Until UP has a value greater than 0

The value of Manual Resume is set to No

The value for UP interval is enable with a value greater than 0

The value for Manual Resume is set to Yes

26. A web server's default gateway is the network router. The LTM Specialist needs to introduce an LTM device to load balance to the web servers without changing the server's default gateway.

Which deployment method and settings should the LTM Specialist use to ensure correct traffic flow and that the web servers can obtain the actual con IP addresses?

route deployment with Automap configured and X-Forwarded-For inserted in HTTP headers

route deployment without SNAT configuration

SNAT deployment with automap configured and X-Forwarded-For inserted in HTTP headers

SNAT deployment with automap configured

27. An LTM Specialist needs to provide statistics regarding the round-trip time between the clients and the servers.

Which metric should be part of the analytics profile to provide that information?

Page Load Time

User Sessions

Max TPS and Throughout

Response Codes

28. Exhibit.





The three VLANS shown provide connectivity to backend servers. The backend servers are being moved to unmanaged switches and require separate interfaces.

How should the F5 device interfaces be configured?

Create a Trunk interface and combined interface 1.1.1.2 and 1.3.

Create a Trunk interface and select VLAN„A, VLAN_

and VLAN_

Create VLAN named VLAN_A enter 100 under Tag and move interface 1.1 to tagged Create VLAN_B enter 200 and move interface 1.2 to tagged Create VLAN_C Center 300 and move interface 1.3 to tagged.

Create VLAN_A move interface 1.1 to untagged. Create VLAN_B move interface 1.2 to untagged. Create VLAN_C move interface 1.3 to untagged.

29. Which process can be eliminated by terminating SSL communication on the LTM device rather than the backend pool members?

generating CSRS

obtaining SSL certificates from a certificate authority

administering SSL on the web servers

applying security patches on the backend pool members

30. Refer to the following iRule:





What is a complete list of profiles that must be applied to the virtual server for this iRule?

Fast L4, HTTP

TCP, HTTP

TCP, HTTP, Client SSL

Fast L4, HTTP, Stream

31. A virtual server is experiencing intermittent port exhaustion.

What should be done to fix this issue?

add more SNAT addresses

add more pool members

enable advanced routing

enable SNAT automap

32. An application is being load balanced through the LTM device using the configuration displayed below.

The network has been re-engineered to NAT all client connection. As a result, all client connections are hitting the same pool member.









Which changes should the LTM Specialist make in order to restore load balancing functionality wile maintaining session persistence?

Change the virtual server type to Standard, add an http profile, and change the persistence profile to Destination Address

Leave the virtual server type set Performance (Layer 4) and change the persistence type to hash

Change the virtual serer type to Forwarding (Layer 4) and leave the persistence type to hash source Address

Change the virtual server to Standard add an http profile, and change the persistence profile to Cookie persistence

33. AN LTM Specialist is setting up a new HTTPS virtual server to decrypt client traffic. SNAT the traffic and send the encrypted traffic to the poor member, the client's IP address must be included in the traffic

sent to the pool member.

What is a complete set of profiles that must be configured for the virtual server to meet these requirements?

TCP, Client SSL, Server SSL

TCP, Server SSL, HTTP

TCP, Client SSL, HTTP

TCP, Client SSL, Server SSL, HTTP

34. An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.

Which monitor type and parameters arc required?

HTTP monitor alias address 192 168.10 10. and set the alias to port 80

TCP monitor, alias address 192.168.10.10. and set the alias to port 80

TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80

TCP monitor, change transparent option to Yes, and sot the alias to port 80

35. AN LTM Specialist receives reports that an external company application is having reliability issues.

The F5 Administrator finds the following in /vat/log/ltm file.





The LTM Specialist determines that the F5 LTM device is entering into Aggressive Mode Adaptive Reaping, which is causing the site reliability issues.

What is the most likely reason that the LTM device has entered into Aggressive Mode Adaptive Reaping?

The LTM device exceeds licensed traffic limits.

The site has too many licensed modules.

The LTM device has not provisioned AV

The site is under DDOS attack

36. An LTM Specialist discovers an issue with the custom http monitor that returns in a false positive status.

The end users cannot get the right website, but the http monitor marks the pool member UP.

What is causing the false positive result?

The end user should use another type of browser.

The response is chunked.

The response is compressed.

The Content-Type has value "iso-8859-200".

37. What should an LTM Specialist configure on an LTM device to send AVR notification emails?

Email notification to be sent via iControl from the LTM device

Syslog on the LTM device to send to an SMTP server

Custom SNMP traps on the LTM device for AVR notifications

Email notification to be sent via SMTP from the LTM device

38. A web server is being overloaded with HTTPS traffic. To decrease the load on the server, the LTM Specialist and the Server. Administrator decide to perform SSL offloading on the LTM device.

The configuration of the virtual server is as follows:





Which change must be made to the configuration to perform SSL offloading?

Remove the clientssl and http profiles

Remove the clients profile

Remove the clientssl and serverssl profiles

Remove the severssl profile

39. An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.

What is an appropriate SNAT configuration in this situation?

A SNAT pool with 4 IP addresses

SNAT automap enabled

A static SNAT

A SNAT pool with IP address

40. A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.

Which virtual server type should an LTM Specialist configure on the LTM device?

Forwarding (Layer 2)

Standard

Stateless

DHCP relay

Forwarding (IP)

 Loading...