Updated 300-430 Exam Dumps (V18.03) for Success – Prepare for Your 300-430 ENWLSI Exam Efficiently and Confidently

1. When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?

2. An engineer must configure Cisco OEAPs for three executives. As soon as the NAT address is configured on the management interface, it is noticed that the WLC is not responding for APs that are trying to associate to the internal IP management address.

Which command should be used to reconcile this?

3. An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets received, and then have the differentiated services code point set to match when it is resent to another port on the switch.

Which configuration is required in the network?

4. What is configured to use more than one port on the OEAP to extend the wired network?

5. A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched SSID is configured for the APs.

Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?

6. An engineer must implement intrusion protection on the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult.

Which AP mode and submode must be implemented?

7. An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs.

Which two Layer 2 security options are supported in this environment? (Choose two.)

8. A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC.

Which configuration should be used to accomplish this goal?

9. A network engineer wants to implement QoS across the network that supports multiple VLANs. All the APs are connected to switch ports and are configured in local mode.

Which trust model must be configured on the switch ports to which the APs are connected?

10. Refer to the exhibit.

A customer has implemented Cisco FlexConnect deployments with different WLANs around the globe and is opening a new branchin a different location. The engineer’s task is to execute all the wireless configuration and to suggest how to configure the switch ports for new APs.

Which configuration must the switching team use on the switch port?

11. A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors.

When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured, how many image transfers between the WLC and APs will occur?

12. A network engineer is deploying 8865 IP phones with wireless clients connected to them. In order to apply the appropriate QoS, the IP voice traffic needs to be distinguished from client data traffic.

Which switch configuration feature must be enabled?

13. An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely.

What is configured on the Cisco WLC to allow the user to print a printer on his home network?

14. 1.On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised.

Considering that FlexConnect local switching is enabled, which setting is causing this behavior?

15. A company is collecting the requirements for an on-premises event. During the event, a wireless client connected to a dedicated WLAN will run a video application that will need on average 391595179 bits per second to function properly.

What is the QoS marking that needs to be applied to that WLAN?

16. An enterprise has two WLANs configured on WLC. It is reported that when converting APs to FlexConnect mode, WLAN A works but WLAN B does not. When converting APs to local mode, WLAN B works, but WLAN A does not.

Which action is needed to complete this configuration?

17. An organization is supporting remote workers in different locations. In order to provide wireless network connectivity and services, OfficeExtendhasbeen implemented. The wireless connectivity is working, but users report losing connectivity to their local network printers.

Which solution must be used to address this issue?

18. An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC.

Which feature meets these requirements?

19. Refer to the exhibit.

Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)

20. An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP.

Which client feature becomes available only if this configuration is changed?

21. An enterprise started using WebEx as a virtual meeting solution. There is a concern that the existing wireless network will not be able to support the increased amount of traffic as a result of using WebEx. An engineer needs to remark the QoS value for this application to ensure high quality inmeetings.

What must be implemented to accomplish this task?

22. An engineer is responsible for a wireless network for an enterprise. The enterprise has distributed offices around the globe, and all APs are configured in FlexConnect mode. The network must be configured to support 802.11r and CCKM.

What needs to be implemented to accomplish this goal?

23. A corporation has employees working from their homes. A wireless engineer must connect 1810 OEAP at remote teleworker locations. All configuration has been completed on the controller side, but the network readiness is pending.

Which two configurations must be performed on the firewall to allowthe AP to join the controller? (Choose two.)

24. When using a Cisco Catalyst 9800 Series Wireless Controller, which statement about AutoQoS is true?

25. Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?