Introducing Updated 350-601 Exam Dumps (V21.02) for 2026 – Continue to Check 350-601 Free Dumps (Part 2, Q41-Q80) Today

1. An engineer must implement a set of changes in a Cisco Nexus 9000 Series Switch so that:

Which set of actions meets these requirements?

A)

B)

C)

D)

2. Refer to the exhibit.

An engineer is configuring Cisco Data Center Network Manager to automate the provisioning of Cisco Nexus 9000 Series Switches. The engineer must configure user access for network engineers to permit device operations in Interface Manager. The solution must hide Admin and Config Menu items in Interface Manager.

Which two roles must be assigned to the network engineers to meet these requirements? (Choose two.)

3. DRAG DROP

A network engineer is asked to describe the cloud infrastructure models from the perspective of their operation and access to resources.

Drag and drop the descriptions from the left onto the appropriate.

4. Refer to the exhibit.

A network engineer must implement V XLAN between two core switches called CORE_2 and CORE_3. The core switches must have multicast disabled. In addition, the VLAN 100 called APP and VLAN 200 called DB must be extended between the core switches. The initial VXLAN configuration has been completed on CORE_2.

Which Network Virtual Interface configuration completes VXLAN configure?

A)

B)

C)

D)

5. Refer to the exhibit.

An engineer implements an FCoE Unified Fabric where vPC exists between N9K-A and N9K-B. To avoid rate discards, bandwidth must be regulated to account for sent traffic that exceeds the access speed.

Which set of commands completes the configuration?

A)

B)

C)

D)

6. Refer to the exhibit.

The router R1 and N9K1 establish EIGRP neighborship. R1 is advertising network 10.1.1.15/32 to N9K1 and N9K2 and N9K3 are forming the OSPF neighborship over area 1.

Which configuration prevents N9K3 from receiving external LSA for network 10.1.1.15/32?

A)

B)

C)

D)

7. An engineer builds a new Cisco ACI fabric.

Which VLAN must be configured as the infrastructure VLAN during the Cisco APIC setup script?

8. Which protocol is used by a Cisco NX-OS device to send telemetry data encoded in JSON?

9. An engineer modifies the virtual port channel domain on a Cisco Nexus 9000 Series Switch using Session Manager.

Which two commands must the engineer use to confirm the configuration is valid and apply the configuration to the switch? (Choose two.)

10. 1.The Cisco UCS blade chassis must send SNMPv3 traps to a network monitoring system. The SNMP trap messages should be authenticated and have protection from closure.

Which SNMP security privileged level should be configured?

11. An engineer performs a Cisco UCS C480 ML M5 installation from a Cisco UCS Manager As a part of the design the server must perform an iSCSI bool from the storage array.

Which configuration must be performed in the SAN settings in the root organization to satisfy that condition?

12. A Cisco UCS C-Series server needs to be installed in a data center. The server must be managed by using Cisco UCS Manager with a single cable for management and data traffic.

Which set of commands must be run on the server after a physical connection is established?

A)

B)

C)

D)

13. Refer to the exhibit.

An engineer must configure fabric binding on a Cisco MDS 9000 Series Switch to match the output.

Which fabric database configuration accomplishes this goal?

14. An engineer m9ust configure SAN connectivity in Cisco UCS manager. The requirement is to specify the WWPN of the storage array and set the zoning type to single initiator multiple targets. The engineer must also configure interrupt handling and queues of the vHBA interface.

Which two Cisco UCS policies should be used to configure the settings? (Choose two.)

15. A DevOps engineer must design a solution to push network configurations across a company infrastructure to ensure consistency. The solution must be easy to configure and manage and must support Python and YAML.

Which configuration management tool meets these requirements?

16. The network team needs permissions to access the Cisco UCS B-Series Servers via the Cisco UCS Manager GUI to configure the network and collect information about faults. The administrator wants to assign these permissions to the newly configured user called netops.

Which set of tasks must the administrator perform to accomplish these goals?

17. A storage administrator notices an increasing number of storage targets that unexpectedly reach capacity, causing periodic service interruptions The administrator must now create and submit a daily report of the environment that shows the status of the storage targets with the highest capacities.

Which solution provides this information?

18. Which feature results in a disruptive upgrade on the Cisco Nexus 9500 Series when performing a standard ISSU?

19. An engineer must replace a defective fabric interconnect with the same model. The system must be restored, including the database of locally created users. The equivalent Cisco UCS Manager software version must be used.

Which backup type must be used to meet these requirements?

20. Which command must be run before downgrading a Cisco Nexus 9300 Series Switch?

21. Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed?

22. Which two statements describe the process of upgrading an EPLD on a Cisco MUS 9000 Series Switch? (Choose two)

23. An engineer implements an ACI fabric and must implement micro segmentation of endpoints within the same IP subnet using a network-based attribute. The attribute mapping must allow IP subnet independence.

Which attribute must be selected?

24. Refer to the exhibit.

Which configuration ensures that the Cisco Nexus 9000 Series Switches are the primary devices for LACP?

A)

B)

C)

D)

25. Refer to the exhibit.

Which value must be added to the LDAP provider to complete the LDAP group map configuration in Cisco UCS Manager?

26. Refer to the exhibit.

A network engineer must configure an authentication solution for Cisco UCS with these conditions:

• Two-factor authentication must be enabled for all UCS user authentication.

• All AAA packets must be encrypted and use TCP port 49 to establish communication.

Which set of actions needs these requirements?

27. An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus 7000 series switch.

What is the cause of the upgrade being disruptive?

28. A service profile in Cisco UCS Manager must be configured with these requirements:

Cisco UCS Manager must identify the interfaces on the VMware ESXi host that connect to the Cisco ACI fabric switches.

The vNIC must support traffic management when congestion occurs.

Which two policies meet these requirements? (Choose two.)

29. A network engineer must configure a Cisco MDS switch to use the local user database for console access if all AAA servers are unreachable.

Which configuration should be applied to complete this task?

30. Refer to the exhibit.

An engineer must restrict users assigned to the sangroup role on the Cisco MDs 90oo Series Switch from issuing commands on VSANs 15 to 20.

Which command must the engineer run to achieve this objective?

31. An engineer is implementing VSAN 10 on multiple Cisco Nexus 5600 Series Switches and must ensure that the full zone set and active zone set are identical across the fabric.

Which configuration must be implemented to meet this requirement?

32. Refer to the exhibit.

A VXLAN data center fabric has three hosts mapped to three different VLANs. Ingress and egress VTEPs perform Layer 2 and Layer 3 lookups VLAN 100 is mapped to VNI 1010 on Lead.

Which set of actions allow communication between Host-1 and Host-2?

33. A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature.

Which component is upgraded during the infrastructure firmware upgrade stage?

34. Refer to the exhibit.

A Cisco data center environment is implemented with vPC. The web server replies using the SVI MAC address as the Layer 2 header instead of the HSRP MAC address on VLAN 23. This behavior causes packet drops on the Cisco Nexus 9000 Series Switches due to the vPC loop prevention mechanism The requirement is for the vPC feature to allow N9K_1 and N9K_2 to forward traffic between the NAS server and the web server, even if the HSRP's MAC address is not used on Layer 2 headers for VLAN 23.

Which feature must be used to accomplish this goal?

35. DRAG DROP

Refer to the exhibit.

Drag and drop the code snippets from the bottom onto the blanks in the code to complete the JSON request that implements the ACL presented. Not all code snippets are used.

36. An engineer configures a role for a new user in Cisco UCS Manager The role should allow the user to configure vHBAs, vNICs, and server port types.

Which role should be assigned to allow the engineer to complete this task?

37. A network automation engineer must configure a Cisco NX-OS REST API on a Cisco 9000 Series Switch with these requirements:

• NX-API REST and the DME database must be enabled.

• The NX-API REST must listen for HTTP traffic on port 83.

• The HTTPS certificate must be uploaded.

Which configuration set must be used to accomplish these goals?

A)

B)

C)

D)

38. What is a benefit of using the Cisco UCS Lightweight upgrade feature?

39. Which protocol does Cisco Hyperflex use to share data among nodes in a VMware vSphere environment?

40. Refer to the exhibit.

An engineer must send all traffic passing through interface fc1/1 on N9K_1 to the monitoring laptop using a SPAN session. This configuration has already been applied to Cisco UCS Manager.

Which additional set of actions must be taken to accomplish this goal?