Updated 350-601 Dumps (V20.02) for Your Exam Preparation: Proven Methods to Succeed

1. A DNS server with IP address 192.168.1.1 is deployed in a data center A network engineer must configure a Cisco UCS Fabric Interconnect to use this DNS.

Which configuration should be applied?

2. What is a feature of NFS?

3. Refer to the exhibit.

Which type of backup is required to restore a Cisco UCS configuration?

4. A network engineer must create an EEM script that saves a copy of the running configuration on bootflash and writes a message to syslog when a user saves the configuration to a Cisco Nexus switch.

Which configuration set should be applied to complete this task?

5. A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings.

Which two privileges must be granted to the employee to complete the task? (Choose two.)

6. Several production and development database servers exist in the same EPG and IP subnet.

The IT security policy is to prevent connections between production and development.

Which attribute must be used to assign the servers to different microsegments?

7. A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning” and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity.

Which configuration must be applied to meet these requirements?

8. An engineer performs a set of configuration changes for the vPC domain using Session Manager.

Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two)

9. An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN.

Which method does Cisco recommend to configure the SAN boot?

10. An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows.

Which two resources must be specified in the vHBA template? (Choose two.)

11. An engineer needs to monitor ingress traffic that arrives at interface Ethernet 1/3 that belongs to a Cisco Nexus 5600 Series Switch. The traffic analyzer machine located at interface Ethernet 1/5 is already monitoring other production, and the traffic analyzer must not be impacted by the traffic captured from the interface Eth1/3. The operations team allocated a traffic budget for the new monitoring session of 1 Gbps to meet this requirement.

Which set of commands configures the SPAN session?

12. Which two statements about the process of upgrading an EPLD on a Cisco MDS 9000 series Switch are correct? (Choose two.)

13. An engineer requires a solution to automate the configuration and deployment of remote network devices for a customer.

The engineer must keep these considerations in mind:

• The customer's environment is based on industry-accepted standards and requires a solution that meets these standards.

• The security requirements mandate the use of a secure transport mechanism between the automation software and target devices such as SSH or TLS.

• The solution must be based on a human-readable and easy to parse format such as XML or JSON.

Which solution must be used to meet these requirements?

14. Which solution provides remote and direct file-level access to users and systems?

15. Refer to the exhibit.

An engineer must monitor all LAN traffic on Fabric A from a blade server.

Which source should be configured in the test-span monitor session to complete this task?

16. After a Cisco Nexus 7000 Series Switch chassis replacement, the administrator discovers that all vPC-enabled LACP port channels are reinitialized. The administrator wants to prevent this issue the next time the chassis is replaced.

Which two actions must be taken to meet this requirement before the isolated device is reloaded'? (Choose two)

17. A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an unauthorized source. The customer requires a feature that will allow all devices already logged in and learned in and learned to be added to the Fibre channel active database.

Which two features must be enabled to accomplish this goal? (Choose two.)

18. An engineer must configure OSPF in the data center. The external routes have already been redistributed OSPF.

The network must meet these criteria:

* The data centre servers must reach services in the cloud and the services behind the redistributed routes.

* The exit point toward the internet should be propagated only when there is a dynamically learned default route from the upstream router.

Which feature is required?

19. A network architect must redesign a data center on OSPFv2. The network must perform fast reconvergence between directly connected switches.

Which two actions must be taken to meet the requirement? (Choose two)

20. An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the upstream vPC switch peers.

Which vPC feature must be implement to ensure that vPC and non-vPC switches receive same STP bridge ID from the upstream vPC switch peers?

21. A company is running a pair of cisco Nexus 7706 series switches as part of a data center segment. All network engineers have restricted read-Write access to the core switches. A network engineer must a new FCoE VLAN to allow traffic from services toward FCoE storage.

Which set of actions must be taken to meet these requirements?

22. Refer to the exhibit.

Esxi-server is associated to the blade server. A VLAN added to trunk-a. the VLAN is missing on the vNIC of ESXI-server.

Which action should be taken to add the VLAN to the cNIC?

23. Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.

24. Drag and drop the NAS features from the left onto the NAS descriptions on the right. Not all features are used.

25. DRAG DROP

A network administrator must automate the process of pinging all the IP addresses from the 10.0.0.0/8 subnet. The subnet is already present in the ARP table of the Cisco Nexus switch.

Drag and drop the bash commands to generate the desired output. Not all commands are used.

26. An engineer configures the NetFlow feature on a Cisco NX-OS device. The requirement is to reduce the amount of export data collected by using a sampler.

Drag and drop the NetFlow configuration steps from the left onto the implementation needed to meet these requirements on the right. Not all steps are used.

27. Drag and drop the steps on the left onto the order that they must be implemented on the right to recover a fabric interconnect when there is no working image on the bootflash.

28. An engineer must implement the FCoE on the Cisco Nexus 9000 Series Switch-based infrastructure. The deployment will contain dual-homed fabric extenders and must support jumbo frames with port channels.

Which two sets of actions complete the configuration? (Choose two.)

29. Refer to the exhibit

A network engineer must configure port E1/31- 32 to forward only storage server traffic of VLAN 200 on Cisco fabric interconnects A and B. Port E1/31- 32 is not reserved for any other traffic.

Which port type must be configured to accomplish this goal?

30. What is a benefit of independent resource scaling in Cisco HyperFlex hybrid architecture?

31. A storage array must be connected to port ethernet1/10 on a Cisco MDS 9000 Series Switch.

In addition, the array must connect using the FCoE protocol and be single-homed.

Which configuration meets these requirements?

32. An engineer must implement a VXL AN-based data center interconnect. The long-distance transport provided by a service provider is IP-based, supports a maximum MTU of 1554 bytes, and does not support outbound traffic replication.

Which action must be taken to build the data center interconnect?

33. Refer to the exhibit.

During a vPC peer switch reload, there is packet loss between the server and the router.

Which action must be taken to prevent this behavior during future reloads?

34. An engineer must implement Strict Unicast Reverse Path Forwarding mode for IPv4 packets on the Ethernet1/1 interface on the Cisco Nexus 9500 Series Switch.

Which configuration achieves this goal?

35. An engineer must use the Python module in the Guest Shell of the Cisco Nexus 9000 Series Switch to shutdown port Ethernet 1/4.

Which command set will accomplish this?

36. Refer to the exhibit.

An engineer must configure FCoE between the N9K-A switch and the FCF-A Nexus 9000 core switch.

The deployment has these characteristics:

✑ The N9K-Aand N9K-B top-of-rack switches share the domain ID of the core switches.

✑ The hosts are equipped with converged network adapters.

✑ The only VSAN that is permitted to traverse port-channel 100 is VSAN 20.

Which configuration completes the FCoE configuration on the N9K-A device?

37. What is the reason the system-fm-vrrp checkpoint was created?

38. What are two capabilities of the Cisco Network Assurance Engine? (Choose two.)

39. What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?

40. An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is located under the IP 10.10.2.2. The data sent to the LDAP server should be encrypted.

Which command should be used to meet these requirements?