New IDFX Dumps (V8.02) Are Available for Your Interior Design Fundamentals (IDFX) Certification Preparation

1. Where would an interior designer specify electrostatic dissipative flooring and wall materials?

2. A retired couple is renovating their house and wants to plan for aging in place.

Which of the following should be recommended?

3. A completed programming package MUST contain which feature?

4. The code requires a design to have a two-hour rated wall and an appropriately rated door.

What are the ESSENTIAL components of this rated system?

5. How are the results of a Wyzenbeek test indicated on a textile label?

6. A chair requires 6 yards [5.5 m] of fabric. Based on using a COM striped fabric with a 6" [152 mm] horizontal repeat, how is the quantity BEST calculated?

7. What is the MOST efficient way to distribute balanced daylight and diffused light with minimal glare throughout the changing seasons?

8. When interior materials are too complex for a schedule, the BEST option is to provide a

9. What type of drawing communicates the design intent of a project but does not have the level of detail required for final construction documents?

10. A designer has been asked to design a chair and table for a preschool.

Which human factor is MOST important to consider?

11. Which wayfinding strategy is recommended when designing a daycare facility?

12. A designer is designing the interiors of a major medical center. Federal, state, and local jurisdiction codes apply. All the codes have conflicting requirements.

What should the designer do?

13. A designer is preparing a programming document for a tenant space.

Which technique would BEST confirm that the available space is adequate for user needs?

14. What is the MOST important reason to review an organization's current furniture standards?

15. Fabric for seating in a busy waiting room should have a MINIMUM of double rubs.

16. The client has expressed a desire for a new space that supports a highly collaborative environment.

Which aspect of the design is MOST important?

17. A client has approved concept sketches for a three-dimensional wall treatment. The treatment will be constructed using multiple finishes in an intricate design.

Which document or drawing is MOST important to include in the construction documents and drawings to explain how interlocking finishes should be constructed?

18. If a client requires a full-scale representation of a proposed workstation, what would be requested?

19. When designing a wall with moldings and reveals, what type of detail should be drawn to convey the depth and profile of the reveals?

20. A designer is specifying an acoustical ceiling cloud centered over a conference room table. The ceiling cloud will be 12" [305 mm] lower than the rest of the ceiling.

Where is the BEST location to note the height differences?

21. A ceiling with a high NRC rating of 0.95 will sound.

22. In the northern hemisphere, which window orientation would maximize passive solar energy without the use of fans, pumps, or complex controllers?

23. What information is typically shown on a room finish schedule?

24. A parti diagram

25. Which thick-set method would produce the BEST bond for installing tile on an uneven subfloor?

26. What deliverables are produced at the end of the programming phase?

27. The relative efficacy of lamps is measured in which of the following?

28. A criteria matrix helps designers achieve what PRIMARY goal?

29. A zoning committee would be MOST likely to review what aspect of a new building's footprint?

30. Filing systems are specified by the designer and purchased by the client. Later, the manufacturer offers the designer a commission for using that product.

What should they do?

31. A client has asked the designer to design a brochure rack for the waiting room of a clinic. The rack

must be accessible to all adult patients.

What should be the MAXIMUM height of the brochure rack?

32. After completing programming research for a private residence, what is the BEST tool for summarizing the spatial requirements?

33. The laws of perception, proximity, closure, continuity, and similarity are part of which theory?

34. A designer is preparing a set of construction documents for a project that will involve professionals from several disciplines.

How should the designer coordinate the sheet index on the cover sheet to indicate that the set includes drawings by engineers and consultants?

35. What standard should be referenced when specifying upholstered furniture to maintain air quality?

36. What is the most sustainable light source for public spaces?

37. When designing an open office system project, which of the following design features is MOST important to consider in controlling reflected sound?

38. What are blocking and stacking diagrams used to determine?

39. The IBC REQUIRES that panic or fire hardware must be used on doors in spaces or rooms with occupant loads of 50 or more that are occupancies.

40. What is the MINIMUM clear width for an accessible door opening?

41. What is the MOST important consideration when determining relative traffic flow within an open-plan office?

42. What is the BEST method for a designer to communicate benchmarking research outcomes to a client?

43. What factors determine the MAXIMUM allowable travel distance to an exit?

44. A designer is selecting furnishings for a weight loss clinic lobby.

Which type of chair would the designer MOST likely include in their selections?

45. What are the MOST important considerations when specifying textiles for a commercial interior?

46. A client requires design services for their new office, which will occupy an entire floor in an existing building.

During the programming phase, what group of tasks would the designer perform?

47. Which item is BEST to specify for a universal workstation?

48. What part of the egress system is a non-rated stairway?

49. Which of the following symbols would BEST indicate a pendant in a reflected ceiling plan?

50. What is the total length of ramp required for a rise of 1'-6" [45.72 cm]?