3V0-21.25 Dumps V10.02 for VMware Automation 9.0 Certification – Start with Free Questions

Choose DumpsBase as your learning partner, we have updated the VMware 3V0-21.25 dumps to V10.02 for your Advanced VMware Cloud Foundation 9.0 Automation exam preparation. The latest 3V0-21.25 dumps (V10.02), offering 69 practice questions and answers, give you an efficient way to strengthen exam readiness, reinforce technical knowledge, and improve confidence before taking this VMware Certified Advanced Professional – VCAP Administrator Automation certification. This updated version helps streamline your study process by organizing essential concepts, exam objectives, and practice-based learning resources. These updated 3V0-21.25 exam questions allow you to build a systematic study plan that supports better retention and steady skill development. We have 3V0-21.25 free dumps online, sharing free demo questions to help you check the quality before downloading the V10.02.

VMware 3V0-21.25 free dumps are below, reading 25 free questions first:

1. A customer needs to deploy Kubernetes-based workloads in a newly created VMware Cloud Foundation (VCF) workload domain.

Which two prerequisites must be met before creating an AllApps Organization in VMware Cloud Foundation (VCF) Automation? (Choose two.)

The VMware Kubernetes Service (VKS) must be activated within the VCF Management domain.

Supervisor must be activated within the VCF Management domain and workload domain.

The VCF workload domain must be configured for VMware NSX Federation.

A Region must be configured within the VCF Automation Provider Management Portal.

Supervisor must be activated within the VCF workload domain.

2. A Provider administrator received a technical requirement mandating the use of Identity Providers (IdP) in place of local accounts.

The following requirements were defined:

• The source directory service must be different between the Provider Management Portal and Organizations.

• The Organization administrators cannot modify the identity provider configuration.

What two requirements should the administrator configure? (Choose two.)

Deploy an Identity Broker cluster per organization.

Setup custom LDAP service configuration per organization.

Push the VCF Automation system LDAP service to all organizations.

Configure and publish a custom organization role for all organizations.

Ensure that "Do not use LDAP" is configured for each organization's SS

3. Which service provides the ability to backup and restore vSphere pods?

VKS

Contour

VM Service

ArgoCD

Velero

4. In VMware Cloud Foundation (VCF) Automation, which construct within an AIIApps organization consists of one or more Supervisors and supplies compute, memory, storage, and network resources to the organization?

Region

Project

Cloud Zone

Cloud Account

5. An administrator has been tasked to provide workload storage that remains available even if one zone in a three-zone Supervisor cluster fails.

Which action must the VMware Cloud Foundation (VCF) Automation administrator take to meet this requirement?

Attach a Supervisor-based, topology-aware Storage Class to the organization.

Create a new Cloud Zone that uses a RAID 1-enabled vSphere storage policy and assign it to the organization.

Export the Supervisor configuration from another region that utilizes vSAN-backed replicated storage.

Increase the organization's storage quota so that workloads can use additional capacity for replicas.

6. An administrator must initiate the deployment of a new 3-tier application architecture using the

VMware Cloud Foundation (VCF) Automation portal.

This application includes:

• A web tier (stateless).

• A business logic tier (some local caching).

• A database tier (stateful, PostgreSQL).

• An NSX load balancer fronting the web tier.

• ~99.9% uptime requirement.

• Moderate performance requirements.

Which requirement represents a risk inherent to single-zone deployments?

A higher latency between application tiers.

A split-brain isolation.

A higher network complexity.

A shared failure domain for all application tiers.

7. A VMware Cloud Foundation (VCF) Automation Administrator is tasked to enable VCF Automation with the following requirements:

• All companies are hosted within a single private cloud.

• RBAC (role-based access control) is enforced.

• Resource governance within companies.

• Segregation between companies.

What two actions must the VCF Automation Administrator perform to satisfy the requirements? (Choose two.)

Deploy a vCenter instance with a Supervisor cluster per company.

Ensure that the vCenter instance has a Supervisor cluster enabled.

Deploy a VCF Operations Orchestrator server to enable multi-tenancy.

Create and configure an AllApps Organization per company.

Create and configure a VMApps Organization per company.

8. Which statement describes Virtual Private Clouds (VPCs)?

Enables the provider administrator to create nested VCF instances with a private cloud.

Enables multiple organizations to share the same physical Supervisor cluster while consuming logically isolated networks.

Enables multiple organizations to share virtualized GPUs.

Enables the provider administrator to create multiple VCF instances nested within public clouds (e.g., Amazon AWS, Microsoft Azure, Google GCP, etc.).

9. An administrator is responsible for managing a VMware Cloud Foundation (VCF) fleet and the administrator has been tasked with the following:

• Create DNS records before each virtual machine (VM) is deployed using VCF Automation. The administrator has already completed the following tasks:

• Created two VCF Operations Orchestrator Workflows with corresponding Event Subscriptions: Create DNS Record Delete DNS Record

• Created a new blueprint to deploy a VM:

Added two string inputs, hostname and domainName

Added hostname: '${input.hostname}' as a custom property of the Virtual Machine resource.

Added domainName: '${input.domainName}' as a custom property of the Virtual Machine resource.

What should the administrator configure within the Event subscription to ensure that the DNS record is only created when the hostname is provided?

Add the Delete DNS Record workflow as the Recovery Workflow of the Create DNS Record subscription.

Add the event.data.customproperties['domainName'] != null condition to the Create DNS Record and Delete DNS Record subscriptions.

Add the event.data.customproperties['hostname'] != null condition to the Create DNS Record and Delete DNS Record subscriptions.

Enable the Block execution of events in topic option in the Create DNS Record and Delete DNS Record subscriptions.

10. An administrator is responsible for managing a VMware Cloud Foundation (VCF)-based private cloud. The private cloud consists of a single organization with a project named production.

The administrator has been tasked with ensuring that the following are standardized across all existing and new blueprints within the production project:

• Inputs: size, OS, location

• Constants: salt_master_id

Which three actions should the administrator take to meet the objective? (Choose three.)

Create a new Property Group containing all required properties for the production project.

Update all blueprints within the organization to use the same locally configured inputs.

Create a new Property Group containing all constant properties for the production project.

Update all existing blueprints within the production project with the new Property Group(s).

Create a new Property Group containing all input properties for the production project.

11. A customer has a requirement to register a resource with an external service during provisioning in a

VMApps Organization.

The requirements are:

• the registration cannot cause provisioning to fail.

• the registration or failure will only be logged in the external service.

What two constructs satisfy the requirements? (Choose two.)

Cloud-init stanza in the blueprint.

ABX action.

Non-blocking event broker subscription.

Blocking event broker subscription.

Bash script on the template.

12. A customer created a workflow to execute during machine provisioning in a VMApps Organization within VMware Cloud Foundation (VCF) Automation 9. The workflow includes inputs that interact with the provisioning-payload data. When a machine is requested, provisioning completes successfully, but the workflow does not run.

What is the cause of the workflow-execution failure?

The Event Broker Subscription is set to blocking.

The workflow is not signed.

The workflow is signed.

The Event Broker Subscription is set to non-blocking.

13. The administrator is tasked with configuring hard tenancy in VMware Cloud Foundation (VCF) Automation.

Which statement reflects how multi-tenancy is configured?

VMApps organizations enable hard tenancy within VCF Automation.

VCF Automation 9 does not support multi-tenancy. That's on the roadmap for VCFA 10.

Namespaces enable hard tenancy within VCF Automation.

Namespace Classes enable hard tenancy construct within VCF Automation.

AIIApps organizations enable hard tenancy within VCF Automation.

14. An administrator is tasked with configuring a multi-tenant environment within the organization's

VMware Cloud Foundation (VCF) deployment. Requirements are:

• isolated network spaces for development and testing.

• dedicated resources.

• role-based access control.

Which of the actions satisfies the requirement?

Define and allocate IP blocks and quotas at the organization level, which will then be selected and consumed by users at deployment.

Configure firewall rules at the datacenter edge level to isolate traffic between departments.

Create an NSX backed VLAN segment per department.

Define and allocate IP blocks and quotas at the organization level, which will then be consumed by the NSX VPCs created by the different departments.

Grant full administrative access for one responsible user in each department to create and manage their own network configurations.

15. An administrator has been tasked with creating a region to provide resources to an Organization in VMware Cloud Foundation (VCF) Automation.

The following information has been provided to the administrator for this task:

• Two workload domains are configured and will integrate with the region.

• All workload domains are configured to share a VMware NSX Manager.

• All workload domains are configured with VMware vSAN storage.

• All workload domain VMware vCenter instances have a Supervisor enabled.

Before creating the region, what two additional configurations should the administrator validate? (Choose two.)

An AllApps Organization has been created.

All Supervisors are configured with the same services across all vCenter instances.

All required virtual machine (VM) classes are present and have the same names across all vCenter instances.

A Region Quota has been created and associated with the Organization.

All required storage classes are present and have the same names across all vCenter instances.

16. An administrator is designing a VCF Automation service catalog item that enables development teams from multiple business units to deploy standardized environments for microservices applications. The solution must support consistent configuration, minimize environment sprawl, and enforce automated decommissioning policies.

Which three capabilities of VMware Cloud Foundation (VCF) Automation can be used to meet these requirements? (Choose three.)

Provide a Virtual Machine (VM) template running Ubuntu with Docker pre-installed.

Define and assign a lease policy.

Create DNS entry for cost center tracking.

Create a custom cloud-init configuration to installing standard company tooling.

Allow predefined firewall rules for outbound access.

17. The organization administrator is tasked with entering a range of IP addresses available for inter-VPC communication. Into which field does the organization administrator need to enter the IP addresses?

External IP Blocks.

Private-Transit Gateway IP Blocks.

N-S Ingress QoS Profile.

Default Outbound NA

18. An administrator has been tasked with configuring tenant branding with the following requirements:

• Organization branding should only appear when a user has logged in to the organization portal.

Select the three steps involved in configuring branding. (Choose three.)

Log into the Provider Management Portal.

Log into the Organization Portal.

Disable the Enable Login and Logout Page Branding setting.

Navigate to Branding.

Import a branding theme.

Enable the Enable Login and Logout Page Branding setting.

19. An administrator has been tasked with creating a Day 2 Operation which invokes vMotion migration on a virtual machine (VM).

Which two steps are required? (Choose two.)

Drag and drop the User Interaction schema element.

Create a resource action.

Call the pre-defined Orchestrator workflow named Migrate virtual machine with vMotion.

Create an Orchestrator action.

Create an ABX action named Migrate virtual machine with vMotion.

20. The product development team is rolling out several new application stacks and require a self-service option to deploy their applications quickly and consistently.

The requirements are:

• Present only approved application configurations.

• No manual configuration within a blueprint.

Which VMware Cloud Foundation (VCF) Automation approach meets these requirements?

Publish pre-approved blueprints to a catalog and allow the team to choose infrastructure options such as compute cluster and storage policy during deployment.

Publish all available blueprints to a catalog so team members can choose what is required and adjust configurations as needed at request time.

Integrate VCFA with a Git repository containing blueprint YAML files and train the team to update infrastructure parameters properly before committing changes.

Publish pre-approved blueprints with all required inputs preconfigured to a catalog so team members can deploy them directly.

21. A system administrator is tasked to create a region for use within an AIIApps organization.

How would the administrator determine which vCenter Servers are available in the infrastructure?

Verify connections in the Organization portal.

Verify connections in the Provider Management portal.

Manually look up the UUID of the vCenter Server(s) in the VMware Kubernetes Service (VKS).

Manually look up the UUID of the vCenter Server(s) in the vSphere Client.

22. An administrator has been tasked to enable developers to utilize Terraform to configure resources within VMware Cloud Foundation (VCF) Automation.

The solution must:

• enable developers to configure Content Libraries.

• enable developers to configure Cloud Zones.

• enable developers to create flavor and image mappings.

What solution satisfies the requirements?

Terraform provider for VCF Automation.

System Administrator role.

Organization Administrator role.

Terraform configuration in VCF Automation.

23. An administrator has been tasked with deploying an AllApps Organization within VMware Cloud Foundation (VCF) Automation.

During the regional networking creation step, which three NSX constructs will automatically be configured? (Choose three.)

A Default Virtual Private Cloud (VPC).

A Virtual Distributed Switch (VDS).

A Provider Tier-0 Gateway.

A Virtual Private Cloud (VPC) connectivity profile.

An NSX Transit Gateway.

24. A development team submits the following requirements to the VMware Cloud Foundation (VCF) Automation administrator:

• Three-tier inventory system (web, application, and database).

• All components deployed as virtual machines (VMs).

• Static IP addresses required.

• NAT and load balancing for external access.

• Network segmentation between DMZ and internal tiers.

• The team requests to use the platform's managed PostgreSQL database service instead of maintaining their own database virtual machines.

Which organization type should the administrator configure to meet these requirements with minimal complexity?

Kubernetes Apps Organization

AllApps Organization

Provider Organization

VMApps Organization

25. A VMware Cloud Foundation (VCF) Automation administrator manages two organizations:

• Finance is a VMApps Organization.

• Development is an AllApps Organization.

When creating a new project in the Development organization, the administrator notices that the available network options differ from those seen in the Finance organization.

Which two factors explain this difference? (Choose two.)

VMApps Organizations provide access to Supervisor networks while AllApps Organizations restrict networking to isolated VPC networks.

AllApps Organizations support only ephemeral Kubernetes ingress networks, so persistent routed networks are not available.

Both Organization types use the same network options, but AllApps Organizations require enabling DHCP before routed networks are visible.

VMApps Organizations rely on traditional vSphere-backed or NSX-backed networks for virtual machine connectivity.

AllApps Organization networking includes VPC-based networks.

 Loading...