Updated JN0-663 Exam Dumps Questions Are Good For Passing Juniper JNCIP-SP Certification Exam

Shamiyo 09-12-2022

Choosing the online study guide is always thought of as an effective way to prepare for the IT certification exams, including the JN0-663 Service Provider Routing and Switching, Professional (JNCIP-SP) certification exam. Updated JN0-663 exam dumps questions of DumpsBase are available, which could be your good learning materials for passing the Juniper JNCIP-SP certification exam. All these questions and answers have been verified by the successful customers, they have passed their Service Provider Routing and Switching, Professional (JNCIP-SP) JN0-663 exam by reading all DumpsBase JN0-663 updated questions and answers. One must go with the JN0-663 exam dumps questions for the Juniper Service Provider Routing and Switching, Professional (JNCIP-SP) Exam prepared by DumpsBase. DumpsBase has taken the responsibility to provide the accurate Juniper JN0-663 dumps to help you prepare for the Juniper JNCIP-SP certification well. 

How to complete the Juniper Service Provider Routing and Switching track?

We can find that Juniper certification contains several tracks:

The Service Provider Routing and Switching, Professional (JNCIP-SP) JN0-663 exam is for the Juniper  Service Provider Routing and Switching track. This track enables you to demonstrate a thorough understanding of networking technology in general and Juniper Networks service provider routing and switching platforms. Four levels should be completed:

Junos, Associate (JNCIA-Junos) - Associate level of Service Provider Routing and Switching track

It is designed for networking professionals with beginner-intermediate knowledge of networking. Passing the JN0-104 exam to verify your understanding of the core functionality of the Juniper Networks Junos OS. The JN0-104 JNCIA-Junos not only serves the Service Provider Routing and Switching track but also the Data Center Certification Track and Enterprise Routing and Switching Certification Track. 

Service Provider Routing and Switching, Specialist (JNCIS-SP) - Specialist Level of Service Provider Routing and Switching track

This level is designed for networking professionals with beginner to intermediate knowledge of routing and switching implementations in Junos. JN0-363 exam is the written exam to verify your basic understanding of routing and switching technologies and related platform configuration and troubleshooting skills.

Service Provider Routing and Switching, Professional (JNCIP-SP) - Professional Level of Service Provider Routing and Switching track

JN0-663 Service Provider Routing and Switching, Professional (JNCIP-SP) is the professional level, which verifies your basic understanding of advanced routing technologies and related platform configuration and troubleshooting skills.

Service Provider Routing and Switching, Expert (JNCIE-SP) - Expert Level of Service Provider Routing and Switching track

Juniper JNCIE-SP is at the pinnacle of the Service Provider Routing and Switching certification track. Passing the JPR-961 lab exam is a requirement. The JNCIE-SP lab exam is designed to validate your ability to implement, troubleshoot and maintain Juniper Networks service provider networks. The 6-hour format of this exam requires that you build a service provider network consisting of multiple vMX virtual routers. You will perform system configuration on all devices, implement various protocols, policies and VPNs, multicasts, and class of services.

How to pass the JN0-663 JNCIP-SP exam successfully and easily?

Passing the JN0-663 Service Provider Routing and Switching, Professional (JNCIP-SP) exam is not easy, but you can choose the DumpsBase JN0-663 exam dumps as the preparation materials. Using the help of DumpsBase Juniper JN0-663 dumps so you will possess the selection to take the JN0-663 pdf and testing engine as well. These JN0-663 exam dumps questions are critical for the preparation so you get the explanations about the Juniper Service Provider Routing and Switching, Professional (JNCIP-SP)certification exam. 

If you are interested to go with the Juniper JN0-663 exam dumps prepared by DumpsBase to go through Service Provider Routing and Switching, Professional (JNCIP-SP) JN0-663 test so there is an option to avail of free Juniper JN0-663 exam questions demo that is basically designed for everyone. This can be helpful in clearing the JN0-663 exam and it will be helpful to understand the features of JN0-663 exam dumps.

Below is Juniper JN0-663 free exam dumps demo of DumpsBase

Which two statements regarding Ethernet segments (ES) are correct? (Choose two)

A. The Type-1 EVPN route will indicate if the ES is all-active or single-active.

B. The Type-4 EVPN route will be used to elect the designated forwarder for the ES.

C. The Type-2 EVPN route will indicate if there is a designated forwarder on the ES.

D. The Type-3 EVPN route will be used for the aliasing function to load-balance to the ES

Answer: A,C

You are asked to configure a series of interface policers and firewall filters, which include policers, on the same device You must ensure that the two configuration methods do not conflict.

What are two considerations when performing this task? (Choose two.)

A. On inbound traffic, interface policers are applied before firewall filters.

B. On inbound traffic, firewall filters are applied before interface policers.

C. On outbound traffic, interface policers are applied before firewall filters.

D. On outbound traffic, firewall filters are applied before interface policers.

Answer: A,D

You are creating an LDP-signaled Layer 2 circuit between two sites. Site1 and Site2 use different VLAN IDs to connect to your PE devices In this scenario, which encapsulation type must be used on the logical interfaces?

A. vlan-bridge

B. vlan-ccc

C. vlan-tcc

D. vlan-vpls

Answer: C

Which two statements about IS-IS are correct? (Choose two.)

A. Level 1 intermediate systems exchange routing information with Level 1 intermediate systems in other IS-IS areas.

B. An IS-IS router sets the attached bit in the PDUs it sends to a Level 1 area to indicate that it is a backbone router.

C. A Level 1 router can only form adjacencies with other Level 1 routers.

D. Level 2 routers can form adjacencies with either Level 1 or Level 2 routers.

Answer: B,C

You are responsible for configuring CoS for your network Your network includes a video application with strict latency requirements, so that any packets delayed by more than 75 ms are effectively useless. You want to ensure that you do not waste buffer space.

When configuring the scheduler for this application, which feature would you use?

A. exact

B. remainder

C. rate limit

D. temporal

Answer: D

The link between CE1 and PE1 has a history of flapping To avoid the impact that flapping causes to the network you decide to use route damping

Which statement is correct in this scenario?

A. Dampened routes decay at a sliding rate known as half-life

B. Routes become dampened when the configured max-suppress value is reached

C. Dampening is enabled on interfaces

D. Dampened routes become active when their figure of merit drops below the reuse value.

Answer: A

What information is stored in a VRF table for a BGP Layer 2 VPN? (Choose three.)

A. Layer 2 encapsulation

B. local site ID

C. remote interface of local CE device

D. logical interlace provisioned to local CE device

E. label-switched path

Answer: ABD

You want to allow the load balancing of traffic for an EBGP route from two different peers in the same AS.

Which three actions are needed to accomplish this task? (Choose three.)

A. A policy to load-balance traffic should be applied to the forwarding table

B. At least two interfaces should be connected to the same EBGP neighbor

C. The multihop parameter should be configured under protocols BGP

D. The multipath parameter should be configured under protocols BGP

E. An equal cost AS path for the route is required.

Answer: A,D,E

What is the purpose of the duster-list attribute within a BGP route reflector group?

A. to disable internal cluster re-advertisements

B. to define the router that first advertised the route to the route reflector

C. to override the router 10 value within the cluster

D. to facilitate loop detection within the route reflector network

Answer: D

You are deploying a new EVPN service for your customers.

You must build the service based on the following requirements

-- both Layer 2 and Layer 3 functionality must be supported

-- your customers must be able to support multiple VLANs in the same EVPN instance (EVI).

In this scenario which two types of routing instances should be configured? (Choose two.)

A. VRF

B. virtual switch

C. virtual router

D. EVPN

Answer: BA