New Updated 300-180 DCIT Exam Questions

Just make sure you have selected new 300-180 DCIT exam questions to prepare for CCNP Data Center certification 300-180 exam well. New updated 300-180 DCIT exam questions have been released on 12/29/2018, the current version is V12.02 with 416 questions and answers. New 300-180 exam questions are cracked based on the knowledge points, which ensure your success in Troubleshooting Cisco Data Center Infrastructure exam.

Check 300-180 DCIT Free Dumps of V12.02 300-180 Exam Questions

1. Which piece of information does the FSM provide?


2. Which of these does not have an FSM associated with it?


3. Refer to the exhibit.

Which tab would be the most useful for troubleshooting a blade discovery



4. RBAC is a method of restricting access for a particular user on which two of these? (Choose two.)


5. A customer is configuring LAN pin groups in a Cisco UCS domain. The customer has two fabric interconnects and would like to associate the pin group with only one interconnect.

Which statement about this configuration is true?


6. A customer is configuring an upstream disjoint Layer 2 network in a Cisco UCS domain.

So far they have configured the following:

– Fabric Interconnects are in switching mode.

– There is symmetrical configuration for high availability.

– There are no overlapping VLANs.

Each vNIC is communicating with one disjoint Layer 2 network. After validating the above, the customer is still having issues with network connectivity.

What is the issue?


7. A customer is configuring a network control policy in a Cisco UCS domain. The network control policy configures the network control settings for the Cisco UCS domain, including which three of these? (Choose three.)


8. A customer is troubleshooting QoS in a Cisco UCS domain due to high packet drops in the network. The customer has configured the vNIC and associated QoS policy, and changed the MTU from 1000 to 1200. Packet drops still exist.

What is the cause of this issue?


9. A customer is configuring the dynamic vNIC connection policy in a Cisco UCS domain.

Why is the dynamic vNIC policy required?


10. What is the default number of dynamic vNICs that is specified by the Cisco UCS Manager when creating a dynamic vNIC connection policy?


11. Looking at the Equipment > Chassis > Servers > Server X view from the Cisco UCS Manager GUI, which tab would you select to identify the fabric interconnect uplink associated with a given virtual circuit?


12. While attempting to boot a Cisco UCS server from SAN, you are unable to see the LUN.

Which of these are causing the problem? (Choose three.)


13. A Cisco UCS chassis has two ports on I/O Module 1 connected to Fabric Interconnect A, and two ports on I/O Module 2 connected to Fabric Interconnect B. The I/O modules are connected to ports 1 and 2 on their respective fabric interconnects, and end host mode is configured.

After a link failure occurs on port 1 of I/O Module 1, what happens to the traffic that was pinned to that link?


14. During a password recovery of a Cisco UCS system in a cluster configuration, what happens to blade traffic?


15. For a KVM session to be successful, which two of these need to be done? (Choose two.)


16. As a Cisco UCS administrator, you have a large deployment of C-Series servers. You decide to integrate these into a Cisco UCS Manager environment to simplify management.

Which two of these will you need to purchase? (Choose two.)


17. Which three Cisco UCS server components can be upgraded via a host firmware package? (Choose three.)


18. Which three methods can be used to upgrade the Cisco IMC? (Choose three.)


19. Which of these is a supported Cisco C-Series integration topology?






20. Which command sequence in the Cisco UCS C-Series rack server CLI sends tech support data to a TFTP server?


21. What is the recommended procedure to update Cisco UCS C-Series rack-mount server firmware?


22. You are installing Microsoft Windows Server 2008 R2 on a Cisco UCS C210 M2 server, and the installer does not see local storage on the LSI MegaRAID SAS 9260-4i controller that is installed.

Which statement explains the issue?


23. Which CLI command will indicate whether a Cisco UCS C-Series rack-mount server has any

failed DIMMs?


24. You successfully install VMware ESXi 5.0 U1 on a Cisco UCS B200 M3 server to a Fibre Channel LUN. When you reboot the server, you see the message "Reboot and Select Proper Boot device or insert Boot Media in selected Boot device and press a key."

What are the first two pieces of information you should gather to troubleshoot the boot failure? (Choose two.)


25. A customer calls in a trouble ticket complaining of unacceptable read I/O latency on a Cisco UCS C210 M2 server with an LSI MegaRAID 9260-8i with an 8-disk RAID-10 virtual disk.

As you validate the RAID controller configuration, which of these configured items impacts read performance at the controller level?


26. You are troubleshooting an FCoE SAN boot issue on a Cisco UCS C240 M3 server with a VIC 1225.

Which two of these represent the correct way to bind VSAN 11 to interface vfc5 attached to

interface Ethernet 1/5? (Choose two.)


27. You are troubleshooting an FCoE boot issue on a Cisco UCS C220 M3 server with a VIC 1225


Which two pieces of information can you directly infer from the output of the show zone

active command below? (Choose two.)

zone name Server_1-to-Storage vsan 11

pwwn 50:06:01:60:3b:a0:08:9f [Storage]

* fcid 0x3b000b [pwwn 20:00:00:25:b5:04:0a:02] [C22_Server]


28. Which statement is true with respect to resetting a forgotten Cisco IMC admin password on a Cisco UCS C-Series rack-mount server?


29. Which four tasks can be performed via Cisco IMC remote access to a Cisco UCS system? (Choose four.)


30. Which remote access protocol is used by default to obtain CLI access to a Cisco UCS C-Series standalone server?


31. Which actions on a Cisco UCS Server can be performed under the Cisco IMC utilities? (Choose Four.)


32. During the installation of Windows 2008 64-bit operating system on a Cisco UCS server, the RAID controller is not found.

What is the cause of the problem?


33. A local storage installation of ESX on a Cisco UCS C-Series server has failed due to local storage issues.

What is the cause of the problem?


34. A customer is trying to boot an operating system installed on a Cisco UCS B-Series blade server after a RAID1 cluster migration. The RAID LUN remains in inactive state during and after the service profile association and the server does not boot.

What is the cause of this problem?


35. A customer would like to create an Ethernet traffic monitoring session on a Cisco UCS server to

troubleshoot network connectivity.

The customer has entered the following commands via CLI:

UCS-A# scope eth-traffic-mon

UCS-A /eth-traffic-mon # scope fabric a

UCS-A /eth-traffic-mon/fabric # create eth-mon-session EthMonitor33

UCS-A /eth-traffic-mon/fabric/eth-mon-session* # create dest-interface 2 12

UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # set speed 20gbps

UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # commit- buffer

UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface #

Which outcome will this command sequence produce?


36. A customer is configuring VSANs in a Cisco UCS domain. After configuring the VSANs 3840, 3841, and 3842 in FC end-host mode, the customer sees that these VSANs are not operational and that Cisco UCS Manager is raising faults.

What is the cause of this problem?


37. What is the correct sequence to export tech support data from the Cisco IMC GUI interface?


38. You are attempting to install Microsoft Server 2008 R2 on a Fibre Channel LUN, but the installer does not see the LUN. You have used F6 to load the appropriate SCSI driver.

What should your

first troubleshooting step be?


39. A customer calls in a trouble ticket and explains that after a power failure, the UPS was discovered to be defective and the Cisco UCS C210 M2 server running Windows 2008 R2 went down without proper shutdown. After restarting the server, you discover the RAID 5 array rebuilding parity.

Which write-cache settings on the LSI MegaRAID 9260-4i controller explain this



40. How long are the LED states saved after a blade is removed from a Cisco UCS chassis?


41. How does the FSM react after an error or timeout at a stage?


42. On a Cisco UCS B-Series data center environment; how many default roles are there when utilizing RBAC for security restriction?


43. While updating firmware in a Cisco UCS environment, what will the Cisco UCS Manager do?


44. What is the maximum number of boot targets for an FCoE vHBA on a Cisco UCS C-Series server?


45. Which CLI command identifies the service profile that is associated with a particular compute blade, VIF, vNIC type, link state, and pinned interface?


46. Refer to the exhibit.

Which mistake did the UCS administrator make when trying to access the GUI?


47. Refer to the exhibit.

In a Cisco UCS environment, which switch mode does the exhibit portray?


48. Refer to the exhibit.

Which type of power policy is shown when referring to a Cisco UCS



49. Hotspot Question I

50. Hotspot Question I

51. Hotspot Question I

52. Hotspot Question I

53. Hotspot Question II

54. Hotspot Question II

55. Hotspot Question II

56. Hotspot Question II

57. A customer is trying to boot an operating system that is installed on the eUSB on a Cisco UCS B-Series blade server; however, the boot fails.

What is the cause of this failure?


58. A customer is troubleshooting degraded DIMM errors on a Cisco UCS blade server and would

like to reset the BMC.

What is the correct command sequence to reset the BMC?


59. Which commands can you enter to see if a component in the Cisco UCS domain generated a core file?


60. Which four tech support files can you create with the Cisco UCS Manager that you can submit to Cisco TAC for support? (Choose four.)


61. Which protocols can be used to send to Cisco TAC (Technical Assistance Center) the show tech-support command output information about the Cisco UCS domain? (Choose two.)


62. The Cisco UCS Manager displays FSM information for which four of these? (Choose four.)


63. How will the Cisco UCS Manager react when all of the FSM tasks fail?


64. What should you do when you see faults during the initial setup and discovery process?


65. When using the Cisco UCS Manager GUI to troubleshoot a suspected bad memory, which logs contain data that are related to the faulty DIMM?


66. Which three are valid tech support bundles to collect in the local management shell? (Choose three.)


67. The Core File Exporter automatically exports cores to a remote server as they are generated.

Which protocol does it use for this action?


68. Which log file in Cisco UCS Manager contains information about which user took a specific action?


69. Which statement is true about system event logs?


70. Which two types of ports does end host mode switching have? (Choose two.)


71. In a Cisco UCS environment, what are the three power types in a power policy? (Choose three.)


72. When a service profile is disassociated from a server, what happens to the identity and connectivity information for the server?


73. At any given time, each server can be associated with how many service profiles?


74. Refer to the exhibit.

Using RBAC for security in a Cisco UCS environment, what is seen in the exhibit?


75. Refer to the exhibit.

Which of these is an extension of the virtual machine abstraction that is applied to physical servers?


76. In new Cisco UCS release 2.0 installations, what are the default VLAN IDs?


77. If a server is not associated with a service profile, the activated firmware remains pending.

Which two steps should you take? (Choose two.)


78. After migrating a server that is configured with dynamic vNICs, Cisco UCS Manager assigns new dynamic vNICs to the server.

If you had been monitoring traffic on an original dynamic vNIC, what must you do when the server comes back up?"


79. Which two Cisco Nexus 2000-Series Fabric Extenders support connections to both Cisco Nexus 5000 Series Switches and Cisco Nexus 7000 Series Switches? (Choose two.)


80. UCS-A# scope eth-uplink

UCS-A /eth-uplink # scope fabric a

UCS-A /eth-uplink/fabric # scope interface 2 3

UCS-A /eth-uplink/fabric/interface # create mon-src Monitor23

UCS-A /eth-uplink/fabric/interface/mon-src* # set direction receive

UCS-A /eth-uplink/fabric/interface/mon-src* # commit-buffer

What does the command scope interface 2 3 in the above CLI command sequence do on a Cisco

UCS blade server?


81. You discover that OSPF neighbors are stuck in Exstart and Exchange states.

What prevents the external routes from being propagated to the leaf switches to which endpoints are attached for a given tenant?


82. A customer is configuring SAN pin groups in a Cisco UCS domain. The customer notices that pinning is not working and traffic from the vHBA is not passing over the Fibre Channel uplink port.

Which of these must be done for pinning to work correctly?


83. Refer to exhibit. A Cisco UCS admin is troubleshooting an issue with a vNIC not coming up on a blade. When looking at the CLI of the "Fabric Interconnect",the admin runs this command to view the status of the interface.

Which option describes a possible reason why the interface is stuck in an "initializing" state?


84. Which two options are causes for failure of a Cisco C-Series server that is configured to boot from SAN? (Choose two.)


85. Which command on the Fabric Interconnect displays packet statistics for a given QoS group and MTU size?


86. A Cisco UCS admin is trying to integrate Cisco UCS Manager with Active Directory Authentication. After the configuration is done, the admin is still unable to log in using LDAP credentials.

When running a debug on the Fabric Interconnect, this error is displayed:

ldap_build_roles_and_locales_from_attr: No attr for usr profile

Which step was missed in the configuration?


87. Which three requirements are needed to configure a blade to boot successfully from Fibre Channel? (Choose three.)


88. Which description of a core file is true?


89. Which logs are used to troubleshoot hardware failure?


90. A UCS Admin is trying to launch the KVM console but it is failing to launch. All IP Pools for mgmt. are configured and the CIMC has an address in UCSM. They SSH to the fabric Interconnect and run an ethanalyzer while issuing a ping from their local PC to the KVM IP address. The ping is successful but they do not see the ICMP requests and replies displayed in the capture.

Here is the filter they used:

FIA(nxos)# ethanalyzer local interface mgmt display-filter icmp limit-captured-frames 0

What could be the reason pings are not seen in the capture and the KVM is failing to load?


91. Where do you configure users so that they cannot access resources that belong to other organizations?


92. What is the correct procedure to change Ethernet switching modes?


93. Which power policy should be chosen to maximize the performance of a Cisco UCS system with four PSUs and eight blades?


94. Which option describes why the service profiles do not inherit changes from the template?


95. Which statement about Cisco UCS version compatibility is true?


96. Which feature on the Cisco IMC GUI allows you to view the last boot post operation?


97. Which option is a valid file extension for a CIMC configuration file?


98. Which three components are updated using the Host Upgrade Utility? (Choose three.)


99. Which option causes an operating system on a UCS device to consistently crash several minutes after booting?


100. Which two statements about configuring a traffic monitoring session are true? (Choose two.)


CCNP Routing & Switching 300-135 TSHOOT Dumps
Real 642-887 CCNP Service Provider Dumps

Add a Comment

Your email address will not be published. Required fields are marked *