CCNA Collaboration 210-060 New Dumps Questions Released

We checked that 210-060 Implementing Cisco Collaboration Devices v1.0 exam changed, so we released new 210-060 dumps questions to ensure that you can get CCNA Collabotation certification before 2/23/2020 successfully. New CCNA Collaboration 210-060 dumps questions contain 410 exam questions and answers. You need to read all these 210-060 exam Q&As in pdf and software for 100% passing.

Read 210-060 Free Exam Dumps Questions Online First

1. Which two technologies comprise a Cisco Presence deployment? (Choose two.)

 
 
 
 
 
 

2. Which three network elements are crucial when deploying VoIP devices? (Choose three.)

 
 
 
 
 
 

3. Use the router console to view the configuration and answer the question.

When a call is placed from the Branch Router phone to the PSTN number of 914085551212, the call is failing.

What dial-peer is supposed to be used and why is the call failing? Select 2 (two)

 
 
 
 
 
 
 

4. Use the router console to view the configuration and answer the question.

Emergency calls from a Branch router phone is failing. From the router configuration information provided, why is this call failing?

 
 
 
 

5. Use the router console to view the configuration and answer the question.

International calls are also failing. Using the router configuration supplied, why are international calls failing?

 
 
 
 

6. Use the router console to view the configuration and answer the question.

Calls to National numbers are failing. Using the Branch router configuration, correctly determine why these calls are not successful

 
 
 
 

7. Which two layers are Cisco Unified Communications component layers? (Choose two.)

 
 
 
 
 

8. Which port is the default port for SCCP call signaling on Cisco Unified Communications Manager?

 
 
 
 

9. Which type of signaling does desktop control mode use to control a desk phone?

 
 
 
 

10. What is the interface type that you should use to connect a PSTN analog line to the VoIP network?

 
 
 
 

11. A network engineer receives a report about poor quality on an active call between the IP phone of user A over the WAN to the IP phone of user B.

Using web access to the phone, the network engineer remotely checks call statistics such as jitter, network delay, and packet loss. Calculated packet loss is 3%, average jitter is 20 ms, network delay is 1 ms, and conceal seconds is 7.

What is the most likely problem with this call?

 
 
 
 

12. Why is quality of service critical to voice network traffic?

 
 
 
 

13. Which Cisco Unified Communications Manager protocol communicates with collaboration endpoints?

 
 
 
 

14. Which two tools can be used to measure the quality of a VoIP call? (Choose two.)

 
 
 
 
 

15. What is the recommended maximum one-way latency for voice and video networks?

 
 
 
 

16. An engineer must configure QoS for a VoIP network.

Which option is the best QoS model for this task?

 
 
 
 

17. With GETVPN, if a key server is configured to use multicast as the rekey transport mechanism, then under which of these conditions will the key server retransmit the rekey messages?

 
 
 
 
 

18. An administrator is attempting to add a new IP phone to the network. The phone does not register and continues to cycle through the registration process. The administrator checks and notices that the IP address assigned to the phone is not in the correct network.

What is the cause of this issue?

 
 
 
 
 

19. Which four characteristics are associated with video? (Choose four.)

 
 
 
 
 
 
 

20. Which two directory services are supported by Cisco Unified Communications Manager for Lightweight Directory Access Protocol integration? (Choose two.)

 
 
 
 
 

21. Which three characteristics are associated with voice? (Choose three.)

 
 
 
 
 
 
 

22. Which type of packet-oriented network has the characteristic of being drop-tolerant and delay-insensitive?

 
 
 
 
 

23. Which service allows the network to provide better or special services to a set of users and applications at the expense of other users and applications?

 
 
 
 

24. What is the maximum amount of packet loss an engineer should allow for voice traffic on an IP network?

 
 
 
 

25. A Cisco IP phone is connected to a Cisco switch and is trying to obtain its network configuration.

What is the first protocol that is used?

 
 
 
 

26. A company has 50 employees and all have Cisco IP phones. One employee notices high latency (more than 250 ms one way) on the IP network.

How might this latency impact the employees when they try to make an outgoing phone call?

 
 
 
 

27. Which protocol is used to supply collaboration devices which can be used to monitor active voice call quality?

 
 
 
 
 

28. Which three pieces of information are provided to the Cisco phone by the DHCP server after a reset has been initiated? (Choose three.)

 
 
 
 
 
 

29. Which signaling method uses robbed bit signaling?

 
 
 
 

30. Which is the Cisco recommended maximum jitter value of voice traffic over the network?

 
 
 
 

31. In which three ways does QoS provide better network service VoIP quality? (Choose three.)

 
 
 
 
 
 

32. In which two ways does QoS provide better network service VoIP quality? (Choose two.)

 
 
 
 
 

33. Which option is the Cisco recommended mechanism for delivering voice payload?

 
 
 
 

34. Which two choices best describe call signaling and media flows? (Choose two.)

 
 
 
 
 
 

35. DRAG DROP

Drag the functionality on the left to the correct protocol on the right.

36. Which protocol is used to monitor active voice call quality?

 
 
 
 
 

37. Which server does Cisco recommend that you configure before a CUCM backup?

 
 
 
 

38. An engineer is configuring the Cisco Unified Communications Manager disaster recovery system.

Which three statements about the disaster recovery system are true? (Choose three.)

 
 
 
 
 
 

39. CUC 10.X supports LDAP integration with several widely used LDAP directories systems, including the following:

 
 
 
 
 
 

40. How does a MGCP CALL AGENT route calls?

 
 
 
 

41. Refer to the exhibit.

Which Cisco Unified Communications platform is being utilized?

 
 
 
 

42. An engineer is adding MCU 4500 to Cisco Unified Communications Manager.

Which two configuration areas within Cisco Unified Communications Manager allow the engineer to perform this task? (Choose two.)

 
 
 
 

43. Which three options are the correct methods to implement end users in Cisco Unified Communications Manager? (Choose three.)

 
 
 
 
 
 

44. Which two explanations of DTMF dialing are true? (Choose two)

 
 
 
 
 

45. How are calls routed in an MGCP call agent?

 
 
 
 

46. Which protocol allows Cisco Unified Communications Manager to take control of a specific port on a gateway?

 
 
 
 

47. Which call processing agent is based on Cisco IOS software and works with ISR platforms?

 
 
 
 
 

48. Which two standard supported for streaming live video on cisco telepresence content server (Choose two.)?

 
 
 
 
 

49. Which is the core of the Cisco Collaboration Systems solution?

 
 
 
 

50. Which purpose of the Cisco SIP Proxy service in Cisco Unified CM IM&P is true?

 
 
 
 

51. Which term refers to the time taken for a voice packet to move from the starting point to the final point?

 
 
 
 

52. A voice device in T1 CAS steals the eighth bit from the voice channel to transfer signaling information.

Which frame sample is used in T1 channel DS0 to accomplish this action?

 
 
 
 

53. A user would like all calls to be forwarded to voice mail. The user’s phone is not set up with a soft key for this feature.

Which option accomplishes this configuration from within the Cisco Unified Communication Administrator Directory Number configuration page?

 
 
 
 

54. A new user has successfully registered Cisco Jabber.

Which option verifies that the Jabber client is connected to all appropriate back-end systems?

 
 
 
 
 

55. Use the exhibits below to answer the question.

A new phone has been added to the Cisco Unified Communications Manager, but is not registering properly.

What is causing this failure?

 
 
 
 
 

56. Use the exhibits below to answer the question.

What two issues could be causing the Cisco Jabber failure shown in the exhibit? (Choose two)

 
 
 
 
 
 

57. Use the exhibits below to answer the question.

Refer to the exhibits

Which configuration option, in the device configuration page, will allow an administrator to assign a device to a group of like devices?

 
 
 
 
 

58. An SCCP IP phone places a call to a SIP phone that is registered to the same Cisco Unified Communications Manager Express. During the active call, call waiting indicates a second call is incoming to the handset, but the user decides to ignore it.

In this scenario, what is the combined total number of signaling conversations and media flows that used the SCCP phone as an endpoint?

 
 
 
 
 

59. Which three choices are required for the boot process for a Cisco IP phone? (Choose three.)

 
 
 
 
 
 

60. Which three tools are used to create phone user accounts in Cisco Unified Communications Manager Express? (Choose three.)

 
 
 
 
 
 

61. Which menu does a voice engineer use to create a phone user account in the Cisco Unified CME GUI?

 
 
 
 

62. Which menu option should be selected to add a desk phone as an endpoint in Cisco Unified Communications Manager?

 
 
 
 
 

63. When you attempt to add a phone to the Cisco Unified Communications Manager Express using the GUI interface, the error "No New Phone to Add" appears.

Which command is causing the error?

 
 
 
 

64. The receptionist has a Cisco 7965 phone with 24-button side-car configuration. The side-car button of the phone does not light up when the line is in use.

Which phone configuration is missing?

 
 
 
 

65. A voice engineer configured a Cisco Unified Presence client for a new employee. The CSF device and user are associated, but the end user cannot make a call using Cisco Unified Personal Communicator softphone mode.

Which configuration item should be checked next to identify the issue?

 
 
 
 

66. DRAG DROP

Drag the steps on the left to the correct order on the right for configuring the end user Cisco Unified Personal Communicator.

67. Which configuration causes PSTN users to experience a fail tone for every other call when trying to reach a particular number on Cisco Unified CME?

 
 
 
 

68. Which Cisco Unified Communications Manager configuration causes an IP phone screen to display a "registration rejected" message?

 
 
 
 
 

69. Customer requirements dictate that local calls from area code 408 display the ANI as a 7-digit number.

Which procedure allows the leading digits to be stripped as soon as they arrive at the H.323 voice gateway?

 
 
 
 

70. Which three methods can remotely force a Cisco Unified Communications Manager Express phone to reset? (Choose three.)

 
 
 
 
 
 
 
 

71. Two departments have their own call-park slot to park calls.

Which feature on Cisco Unified CME allows one department to answer a call for another department?

 
 
 
 
 

72. What is the maximum number of digits that an ephone PIN can have to allow after-hour exempt calling privileges?

 
 
 
 
 

73. Which two options are available when adding a user to Call Unity Express? (Choose two.)

 
 
 
 
 

74. Which Cisco Unified CME GUI menu option is used to navigate to the screen used to add or change a user name or password using the Cisco Unified CME GUI interface?

 
 
 
 

75. An administrator wants to add and configure an ephone-dn via the Cisco Unified Communications Manager Express web GUI.

Which feature must be defined under telephony service configuration?

 
 
 
 
 

76. To control telephony costs, management wants to restrict who can place long distance calls.

Which two configuration components allow for this restriction? (Choose two.)

 
 
 
 
 

77. After getting reports that users cannot make calls out to the PSTN, a network administrator opens the Cisco Unified Communications Manager Administration web page and begins to review route patterns.

Why would the administrator look here when troubleshooting PSTN connectivity troubles?

 
 
 
 

78. A user reports that several IP phones in a single department are displaying a continuous "registering" message.

Which fault domain should be investigated?

 
 
 
 
 

79. An end user reports that conference calls are failing.

Which fault domain should be investigated first?

 
 
 
 

80. An engineer receives an isolated report that the customer can make calls successfully from an IP phone to other IP phones, but receives an error recording when attempting to call someone over the PSTN. The user cannot recall the error recording to provide the specific error message.

Which two steps should the network engineer take to begin troubleshooting? (Choose two.)

 
 
 
 
 

81. An end user has an 7945 IP phone, but is unable to launch any of the IP phone applications. A network engineer has confirmed that the device is subscribed to the appropriate applications in Cisco Unified Communications Manager.

How should the engineer instruct the user to launch the IP phone applications?

 
 
 
 

82. Which command allows the telephony service of a Cisco Unified Communications Manager Express router to be associated to loopback address 192.168.143.44?

A)

B)

C)

D)

 
 
 
 

83. Which four devices can be used to provide analog ports, traditional phones, and fax machines? (Choose four.)

 
 
 
 
 
 
 

84. Client A in X site uses an IP phone to call client B in Y site. Engineers have selected SCCP as the default VoIP signaling protocol.

Which network path will the call signaling take when client A calls client B?

 
 
 
 
 

85. Users report that no phone numbers are listed in the corporate directory, but the employee names are listed.

Which option must be verified in Cisco Unified Communications Manager Administration to display the directory numbers?

 
 
 
 

86. Which three devices can be used to provide analog ports for connecting traditional phones and fax machines? (Choose three.)

 
 
 
 
 
 

87. A network engineer must set up an end-user account for a SIP device to use for authentication.

Which end-user information is used for SIP authentication?

 
 
 
 

88. An engineer is adding a third-party video endpoint to Cisco Unified Communications Manager.

Which third-party device type should be used when adding the system?

 
 
 
 

89. An engineer is configuring a group of DNs and wants the external phone number mask to match the last four digits of the DN.

Which option should be used?

 
 
 
 

90. A user registered to Cisco Unified Communications Manager wants their cell phone to ring simultaneously with the IP phone.

Which three configuration points must be configured to achieve this configuration? (Choose three.)

 
 
 
 
 
 

91. An administrator has been deleting phones from Cisco Unified Communications Manager, but would like to reassign those directory numbers.

Which two configuration areas within Cisco Unified Communications Manager allow the administrator to perform this task? (Choose two.)

 
 
 
 
 

92. An IP phone that is using PoE shows "unknown" in Cisco Unified Communications Manager.

What should the engineer do to restore the phone to service?

 
 
 
 

93. A voice engineer is moving an IP phone from one secure Cisco Unified Communications Manager cluster to another. The phones are not registering to the new cluster.

Which task resolves this issue?

 
 
 
 

94. A Cisco IP phone fails to register with the Cisco CallManager.

Which choice should be checked first to isolate the issue?

 
 
 
 

95. Which protocol is used between two Cisco IP phones once Cisco Unified Communications Manager Express connects a call?

 
 
 
 

96. Which three items are required to provision core telephony service on the Cisco Unified Communications Manager Express router? (Choose three.)

 
 
 
 
 
 

97. Which command to assign manualy IP to EX series using CLI?

 
 
 
 

98. How to enable existing remote jabber to register to cucm without VPN?

 
 
 
 

99. End user is on a cisco telepresence session with remote participant and can control the camera at the remote endpoint.

Which feature is underlying?

 
 
 
 

100. Which two actions take place for proper operation when using Advanced Networking on VCS (Choose two.)?

 
 
 
 
 

The Current CCNA Certification 200-125 Exam Dumps Updated
New 300-075 CIPTV2 Exam Dumps Released ON 2/14/2020

Add a Comment

Your email address will not be published. Required fields are marked *